Hi all,
I have one more query related to AWK. I have the following csv data:
,qwertyA, field1, field2, field3, field4, field5, field6
,,,,,,,,,,,,,,,,,,,100,200
,,,,,,,,,,,,,,,,,,,300,400
,qwertyB, field1, field2, field3, field4, field5, field6
,,,,,,,,,,,,,,,,,,,100,200... (9 Replies)
Hi,
I want to grep the line which has 'data11'.then from that line, i need to trace back and find out the immediate line which has the same timestamp of that grepped line.
for eg:
log file:
-----------
Process - data
Process - datavalue - 2345
Process - data
Process - data
Process... (9 Replies)
I have a script with this statement:
/usr/xpg4/bin/awk -F"" 'NR==FNR{s=$2;next}{printf "%s\"%s\"\n", $0, s}' LOOKUP.TXT finallistnew.txt >test.txt
I want to include logic or an additional step that says if there is no data in field 3, move the whole line out of test.txt into an additional... (9 Replies)
I have the following text format in a file which lists the question first and then 5 choices
after that the explanantion and finally the answer.
1.The amount of time it takes for most of a worker’s occupational knowledge and skills to become
obsolete has been declining because of the... (2 Replies)
Hi Experts,
Help needed on joining one line above & below to the pattern matched string line.
The input file, required output is mentioned below
Input file
ABCD DEFG5 42.0.1-63.38.31
KKKK iokl IP Connection Available
ABCD DEFG5 42.0.1-63.38.31
... (7 Replies)
Hello,
I'm new to this forum. I've been doing a lot of sed work lately and have found many useful tips on this forum. I've hit a roadblock in a project, though, and could really use some help.
I have a text file with many lines like the following, i.e., some lines begin with a single word... (3 Replies)
~/assign1b/assign1/york/>
your current directory is york
how do you go back to your home directory with using relative pathname?
not using cd alone?
:( (3 Replies)
hi All ,
I am having a large file with lots of modules as shown below
###############################################
module KKK
kksd
kskks
jsn;lsm
jsnlsn;
Ring
jjsjsj
kskmsm
jjs
endmodule
module llll
1kksd11
k232skks
j33sn;l55sm (6 Replies)
Discussion started by: kshitij
6 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)