Device eth0 issue Post: 302540713

5 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Eth err: "3c501 device eth0 does not seem to be present"

HI, When I do 'service network restart' , I am getting the following error. "3c501 device eth0 does not seem to be present, delaying initialization" Can any one suggest me the cause/solution for this? When I do 'lspci' it is showing the ehternet card as " Ethernet controller"Marvell...

2. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

3. Solaris

Global device issue in sun cluster3.2

In my 2 node cluster (sun cluster3.2) running on x86 VMs. One of my nodes VM1 does not have the global devices populated due to which i cannot failover my file system to node VM1 , what could be the reason for this and how can i rectify it ? VM1:/>cd /dev/global -bash: cd: /dev/global: No...

4. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

5. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

LEARN ABOUT REDHAT

tek4957

TEK4957(4x)															       TEK4957(4x)

NAME

       tek4957 - Tektronix 4957 input driver

SYNOPSIS

       Section "InputDevice"
	 Identifier "idevname"
	 Driver "tek4957"
	 Option "Device"   "devpath"
	 ...
       EndSection

DESCRIPTION

       tek4957 is an XFree86 input driver for the Tektronix 4957 tablet.

       The tek4957 driver functions as a pointer input device, and may be used as the X server's core pointer.

CONFIGURATION DETAILS

       Please  refer  to  XF86Config(5x)  for general configuration details and for options that can be used with all input drivers.  This section
       only covers configuration details specific to this driver.

	       Option "Device" "devpath"
		   sets the path to the special file which represents serial line where the tablet  is	plugged,  for  example	/dev/ttyS0.   This
		   option is mandatory.

	       Option "DeviceName" "name"
		   sets the name of the X device.

	       Option "Speed" "number"
		   sets the sampling rate, from 1 to 6.  Default is 6, maximum speed.

	       Option "Resolution" "number"
		   sets the resolution.
		       0 : 2340 dots  : 1/200 inch
		       1 : 2972 dots  : 1/10 mm
		       2 : 11700 dots : 1/1000 inch
		       3 : 11887 dots : 1/40 mm
		       4 : 5850 dots  : 1/500 inch
		       5 : 5944 dots  : 1/20 mm : default
		       6 : 4680 dots  : 1/400 inch
		       7 : 1170 dots  : 1/100 inch
		       8 : 12 dots    : 1 inch
		       9 : 24 dots    : 1/2 inch

	       Option "TopX" "number"
		   X coordinate of the top corner of the active zone. ( Default = 0 )

	       Option "TopY" "number"
		   Y coordinate of the top corner of the active zone. ( Default = 0 )

	       Option "BottomX" "Inumber"
		   X coordinate of the bottom corner of the active zone. ( Default = full scale )

	       Option "BottomY" "number"
		   Y coordinate of the bottom corner of the active zone. ( Default = full scale )

BUGS 
/ LIMITATIONS
       Currently, only "Absolute" mode is supported ( Sorry )

SEE ALSO

       XFree86(1), XF86Config(5x), xf86config(1), Xserver(1), X(7x).

AUTHORS

       Olivier DANET <odanet@caramail.com>

XFree86 						       Version Version 4.3.0						       TEK4957(4x)