Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: XSCF on M3000
Operating Systems Solaris XSCF on M3000 Post 302540640 by cabaiste on Thursday 21st of July 2011 08:49:48 AM
Old 07-21-2011
XSCF on M3000
Hi,

I've updated a few M3000s to new firmware without any hassle, but on one of them the following is happening:

Code:
XSCF> getflashimage -u wayner ftp://10.16.122.200/tftpboot/IKXCP1102.tar.gz
Error: insufficient free space

Any idea how to delete whatever old firmware is on there so I can get the new one transferred?

Thanks.
 

10 More Discussions You Might Find Interesting

1. Solaris

Mx000 XSCF logging

is there a way to force an error on an xscf much the same way you can with logger on solaris 10? i would like to test and make sure setarchiving is appropriately configured. however, i do not want to just pull a power source as the system is in production. anyway have any insight? showarchiving... (0 Replies)
Discussion started by: pupp
0 Replies

2. Solaris

Service Mode on XSCF

While entering to service mode on XSCF i getting following error XSCF> service Account is not enabled for service mode. What could be the reason for this ? (5 Replies)
Discussion started by: fugitive
5 Replies

3. Solaris

Can't PowerOn M3000 - Bad Data CRC

Hi, I was working on the M3000 and I did a init 0, powered off the system during the weekend. When I tried to poweron today, the XSCF linux boot image keeps on rebooting and does not go to the login for XSCF access. The "Check" LED is on amber. Tried diagnosing but cant get the system up. Any help... (1 Reply)
Discussion started by: incredible
1 Replies

4. Solaris

SUN T5240 vs M3000

Hi, We are planning to buy new server for our data center. Sun T5240 or M3000 which one have better performance, we are going to create many dt sessions in this server. So, i need your suggestions. RJS (4 Replies)
Discussion started by: rajasekg
4 Replies

5. Emergency UNIX and Linux Support

disk replacment, SUN M3000

we have a SUN M3000 server. setup as only 1 domain. disk c0t0d0 and c0t1d0 and setup as SVM mirrors. a few days ago disk T1 failed. new we have replaced the disk, but can's see the disk in format. have done cfgadm and devfsadm. still can't access the new disk in format. the output... (6 Replies)
Discussion started by: robsonde
6 Replies

6. Emergency UNIX and Linux Support

Change username in XSCF

Hi All, I have SPARC T4-4 connected with XSCF console. By mistake console user name is set to "root" instead of "sunadmin" (This is what we keep as standard). How can I change it ? Please help me -> show /SP/users/root /SP/users/root Targets: ssh Properties: role... (1 Reply)
Discussion started by: solaris_1977
1 Replies

7. Solaris

Poor performance on an M3000

Hi We have an M3000 single physical processor and 8gb of memory running Solaris 10. This system runs two Oracle Databases one on Oracle 9i and One on Oracle 10g. As soon as the Oracle 10g database starts we see an immediate drop in system performance, for example opening an ssh session can... (6 Replies)
Discussion started by: gregsih
6 Replies

8. Solaris

XSCF, SP and Dscp - confused.

Hi all, I understand SP is a separate processor use for management purposes. I understand XSCF is the management facility (similar to IDRAC, ILOM etc). I understand that we can create multiple domains in a SPARC machine (something like VM) and we can install OS in it. I am able to use... (4 Replies)
Discussion started by: javanoob
4 Replies

9. Solaris

How to Display M4000 XSCF IP from Solaris OS?

Hi All, I have an Oracle M4000 server with Solaris 10 OS. I have access to Solaris root prompt. But I don't know the XSCF IP of this server. Is there any way to display XSCF IP from Solaris OS? (2 Replies)
Discussion started by: byrusber
2 Replies

10. IP Networking

M5000 Xscf

I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip. it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out. so my question is, any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies

LEARN ABOUT DEBIAN

splitdns323fw

SPLITDNS323FW(1)						   User Commands						  SPLITDNS323FW(1)

NAME

       splitdns323fw - extract data from DNS-323 (and other) firmware images

SYNOPSIS

       splitdns323fw [-k KERNEL] [-i INITRD] [-d DEFAULTS] firmwarefile

DESCRIPTION

       splitdns323fw parses an existing firmware image for a device such as the D-Link DNS-323, DNS-321, and Conceptronics CH3SNAS.

       By default, if only the firmwarefile (R)option is given, the script verifies the checksums of the included components and prints a bunch of
       useful info about the image.  If you specify one or more of the other options, however, the corresponding section  of  the  firmware  image
       will be written to that file.

       -k kernel, --kernel=kernel

	      Write the kernel part of the firmware image to the specified file.

       -i initrd, --initrd=initrd

	      Write the initrd part of the firmware image to the specified file.

       -d defaults.tar.gz, --defaults=defaults.tar.gz

	      Write the defaults part of the firmware image to the specified file.

BUGS

       E-mail  bug  reports to theshed+dns323-firmware-tools@hezmatt.org.  I don't guarantee to be able to help, but I'll give it a shot.  Patches
       are far more helpful.

AUTHOR

       splitdns323fw was written by Matt Palmer, based on reverse-engineering work done by Leschinsky Oleg.

COPYRIGHT

       Copyright (C) 2008 Matt Palmer.
       This is free software; see the source for copying conditions.  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
       LAR PURPOSE, to the extent permitted by law.

SEE ALSO

       mkimage(1), mkdns323fw(1).

dns323-firmware-tools 0.3					   November 2008						  SPLITDNS323FW(1)
All times are GMT -4. The time now is 05:54 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy