07-15-2011
From adminschoice.com:
Quote:
This occurs either when the destination host is down or when
problems in the network cause lost transmission.
First check the operation of the host system, for example by
using ping(1M) and ftp (1), then repair or reboot as necessary.
If that doesn’t solve the problem, check the network cabling and
connections.
No connection was established in a specified time. A connect or
send request failed because the destination host did not properly
respond after a reasonable interval. (The timeout period is
dependent on the communication protocol.)
It usually means you never sent all the data to start with, or no data at all.
The problem is on the ubuntu side probably.
10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
I am scp'ing a file from a server (servera) to my server (serverb)
If servera is down - the scp never times out ... it just hangs eternally..
It is possible to specify a timeout in my script - so if scp fails/hang for more than 60 seconds I assume its failed ?
I am aware there is some... (3 Replies)
Discussion started by: frustrated1
3 Replies
2. HP-UX
Hello,
We try to do an SCP of a Sybase dump file of 4Go between two production HP-UX servers.
Each time the transfer stopn at 299Mo and we have the message "connection lost".
The destination FS has largefiles option activated.
Could you help ? (7 Replies)
Discussion started by: ohemeg
7 Replies
3. UNIX for Advanced & Expert Users
Hello,
I was wondering is there a way for SCP to shorten the timeout to fail when it attempts to connect a host that is down. Seems like it takes about a minute or so for scp to timeout. This is on a AIX 5.3 box.
I saw someone suggest use -o ConnectTimeout but the scp I use doesn't have that... (1 Reply)
Discussion started by: benefactr
1 Replies
4. UNIX for Dummies Questions & Answers
hi people,
i need help about timeout duration of ssl while connecting to another server in network.
this is what i try
bash-3.00# time ssh root@10.10.10.10 "date"
ssh: connect to host 10.10.10.10 port 22: Connection timed out
real 3m10.215s
user 0m0.007s
sys 0m0.011sthere is no... (2 Replies)
Discussion started by: sdkbjk
2 Replies
5. UNIX and Linux Applications
Hi
I am trying to configure sendmail for logwatch and another script i have . However when i try to send a test mail i am getting the following error.
Logwatch is not sending any emails out nor is denyhost. I just want it to send emails out .
Can anyone help me ?
i have looked through... (1 Reply)
Discussion started by: um08
1 Replies
6. UNIX for Advanced & Expert Users
Does anyone know a way to keep the connection open with scp? I really don't like having to type my password in every time I want to transfer a file. Or is there another similar program that will keep my connection open? (6 Replies)
Discussion started by: cokedude
6 Replies
7. Solaris
i am facing an issue that the server give a connection timeout after 60 sec for any request more than that number . i tried to increase the TCP INTERVAL TIMEOUT from the default 60000 ms to more higher number.
the server seems to work fine and didn't give me the massage of the timeout but the... (0 Replies)
Discussion started by: core99
0 Replies
8. Shell Programming and Scripting
Hi,
I am running a ssh connection test in a script, how can I add a timeout to abolish the process if it takes too long?
ssh -i ~/.ssh/ssl_key useraccount@computer1
Thank you.
- j (1 Reply)
Discussion started by: hce
1 Replies
9. Shell Programming and Scripting
Hi Team,
I have 2 servers Server-A & Server-B.
Is there any way to test scp connection between Server-A & Server-B without transferring file?
Basically i want to test the availability of scp connection..
Thanks in advance... (6 Replies)
Discussion started by: Girish19
6 Replies
10. Red Hat
HI
We have some Red Hat Linux Sevres which is having TCP connection timeout, not SSH connection, as an example oracle connection connected from TOD.
SSH i managed to add keepalive and it's working fine (1 Reply)
Discussion started by: bentech4u
1 Replies
ARP(4) BSD Kernel Interfaces Manual ARP(4)
NAME
arp -- Address Resolution Protocol
SYNOPSIS
pseudo-device ether
DESCRIPTION
The Address Resolution Protocol (ARP) is a protocol used to dynamically map between Internet host addresses and 10Mb/s Ethernet addresses.
It is used by all the 10Mb/s Ethernet interface drivers. It is not specific to Internet protocols or to 10Mb/s Ethernet, but this implemen-
tation currently supports only that combination.
ARP caches Internet-Ethernet address mappings. When an interface requests a mapping for an address not in the cache, ARP queues the message
which requires the mapping and broadcasts a message on the associated network requesting the address mapping. If a response is provided, the
new mapping is cached and any pending message is transmitted. ARP will queue at most one packet while waiting for a response to a mapping
request; only the most recently ``transmitted'' packet is kept. If the target host does not respond after several requests, the host is con-
sidered to be down for a short period (normally 20 seconds), allowing an error to be returned to transmission attempts during this interval.
The error is EHOSTDOWN for a non-responding destination host, and EHOSTUNREACH for a non-responding router.
The ARP cache is stored in the system routing table as dynamically-created host routes. The route to a directly-attached Ethernet network is
installed as a ``cloning'' route (one with the RTF_CLONING flag set), causing routes to individual hosts on that network to be created on
demand. These routes time out periodically (normally 20 minutes after validated; entries are not validated when not in use). An entry for a
host which is not responding is a ``reject'' route (one with the RTF_REJECT flag set).
ARP entries may be added, deleted or changed with the arp(8) utility. Manually-added entries may be temporary or permanent, and may be
``published'', in which case the system will respond to ARP requests for that host as if it were the target of the request.
In the past, ARP was used to negotiate the use of a trailer encapsulation. This is no longer supported.
ARP watches passively for hosts impersonating the local host (i.e. a host which responds to an ARP mapping request for the local host's
address).
DIAGNOSTICS
duplicate IP address %x!! sent from ethernet address: %x:%x:%x:%x:%x:%x. ARP has discovered another host on the local network which responds
to mapping requests for its own Internet address with a different Ethernet address, generally indicating that two hosts are attempting to use
the same Internet address.
SEE ALSO
inet(4), route(4), arp(8), ifconfig(8), route(8)
Plummer, D., "RFC826", An Ethernet Address Resolution Protocol.
Leffler, S.J. and Karels, M.J., "RFC893", Trailer Encapsulations.
4th Berkeley Distribution April 18, 1994 4th Berkeley Distribution