I am trying to execute following code:
Whenever it tries to execute nohup command it hangs because of the following prompt in output.
I tried to suppress nohup output using 2>/dev/null but still its not working.
I am trying to submit background jobs using the nohup command on a client system where my session is running under a "master shell" (BASH). If I try to nohup the actual job (ie: nohup MYJOB.BAT > MYJOB.LOG 2>&1 &) the command will fail with a return code of 126 and a "permission denied" message.... (0 Replies)
While executing a ksh file with a input parameter in background like the following
bash-2.03$nohup fil.ksh 4 &
the nohup session is stopped.
The same ksh file while executed like
bash-2.03$fil.ksh 4
works fine.
I am trying the above in Solaris 5.8 in bash shell. Please let me... (2 Replies)
Hello folks,
I have got a script which telnets to different boxes and runs a certain script with 3 run time args.
The line from the script which does it is:
(sleep 1; echo $USERID ; sleep 1; echo $PASSWD ; sleep 1 ; echo y ; sleep 1 ; echo "\r" ; sleep 1 ; echo "cd $FILEPATH" ; sleep 1 ; sleep 1... (1 Reply)
ok... want to start off by saying i am sorry for the ignorance... still trying to figure out the diffs between solaris and aix... and i think that is where i am running into problems... :o
SITTIATION:
we are doing an implementation for Oracle's CC&B... we recently switched from... (1 Reply)
Hi,
I am kinda confused with this, am not sure what is happening
i have a script say test.sh
----------
cat myfile | while read line
do
exit 2
done
echo "out of loop"
-----------
as it is evident, the exit should cause the script to terminate ,hence producing no output for the... (1 Reply)
Hello
I am running this script inst.sh
#!/bin/ksh
sqlplus -s username/password @temp.sql
----Here is my temp.sql
set serveroutput on
select instance_name from V$instance;
exit
When i run the script inst.sh on the command prompt...it runs fine...but
when i run it using... (5 Replies)
There is a daemon which is constantly writing to this particular nohup.out file.This daemon can't be stopped. But the large size of this file is hampering the directory space.I want to write a script which will wait for 48 hours and then delete the contents of the file ( nohup.out ), but not the... (1 Reply)
Hi, but it is possible to effect a sftp in???
thanks thousand
Germanico
---------- Post updated at 07:01 AM ---------- Previous update was at 05:51 AM ----------
Hi, but it is possible to effect a sftp in nohup mode??? (2 Replies)
Hi All
I am struggling to get a process to run in the background on a Ubuntu Linux machine. I run: -
/home/brad > /usr/bin/nohup sudo /home/brad/spideroak/jsystem/runner/runAgent < /dev/null &
5611
/home/brad > /usr/bin/nohup: appending output to `nohup.out'
+ Stopped (SIGTTOU) ... (9 Replies)
Hi
I need to execute about 1000 scp commands sequential , so I made "scp.sh" - like this
scp - rp ...
scp - rp ...
............
scp - rp ...
then I run
nohup sh scp.sh &The problem is: nohup process stopped when I closed session, or when the session expired,... Something wrong :(:(:(
... (4 Replies)
Discussion started by: bobochacha29
4 Replies
LEARN ABOUT LINUX
alarm_handler
alarm_handler(3erl) Erlang Module Definition alarm_handler(3erl)NAME
alarm_handler - An Alarm Handling Process
DESCRIPTION
The alarm handler process is a gen_event event manager process which receives alarms in the system. This process is not intended to be a
complete alarm handler. It defines a place to which alarms can be sent. One simple event handler is installed in the alarm handler at
start-up, but users are encouraged to write and install their own handlers.
The simple event handler sends all alarms as info reports to the error logger, and saves all of them in a list which can be passed to a
user defined event handler, which may be installed at a later stage. The list can grow large if many alarms are generated. So it is a good
reason to install a better user defined handler.
There are functions to set and clear alarms. The format of alarms are defined by the user. For example, an event handler for SNMP could be
defined, together with an alarm MIB.
The alarm handler is part of the SASL application.
When writing new event handlers for the alarm handler, the following events must be handled:
{set_alarm, {AlarmId, AlarmDescr}} :
This event is generated by alarm_handler:set_alarm({AlarmId, AlarmDecsr}) .
{clear_alarm, AlarmId} :
This event is generated by alarm_handler:clear_alarm(AlarmId) .
The default simple handler is called alarm_handler and it may be exchanged by calling gen_event:swap_handler/3 as gen_event:swap_han-
dler(alarm_handler, {alarm_handler, swap}, {NewHandler, Args}) . NewHandler:init({Args, {alarm_handler, Alarms}}) is called. Refer to
gen_event(3erl) for further details.
EXPORTS
clear_alarm(AlarmId) -> void()
Types AlarmId = term()
Clears all alarms with id AlarmId .
get_alarms() -> [alarm()]
Returns a list of all active alarms. This function can only be used when the simple handler is installed.
set_alarm(alarm())
Types alarm() = {AlarmId, AlarmDescription}
AlarmId = term()
AlarmDescription = term()
Sets an alarm with id AlarmId . This id is used at a later stage when the alarm is cleared.
SEE ALSO error_logger(3erl), gen_event(3erl)Ericsson AB sasl 2.1.9.3 alarm_handler(3erl)