06-30-2011
Hi
only 4gb installed.
As soon as it reaches the message '0:0,127,0 : HBA : (megasas, 1) LSI MegaRAID3..' it stops and there is no more disk activity.
When installed on the old install PC the messages immediately after this one are the ID's of the two disks in the RAID, and controller itself. So it seems to me that it is not recognising the RAID properly.
Strange given that it has at this point loaded the operating system and partially booted off the RAID to then not see it properly.
MP4 still installing... will retry when done.
---------- Post updated at 12:51 PM ---------- Previous update was at 12:01 PM ----------
Hi Jgt
thanks for your advice re MP4. This has fixed it. The disks now boot properly when fitted to the Supermicro target machine. What a performance!
Many thanks once again
Andy
9 More Discussions You Might Find Interesting
1. AIX
Hello there!
I have a RS-6000 7043-140 machine with AIX version 4.1.5, that is
working for almost 8 years now. It has a tty monitor. My problem
started when I upgraded my machine to install a gxt250 graphics adapter
card together with a 15" AOC VGA Monitor, logitech keyboard and mouse, ... (2 Replies)
Discussion started by: bright_genius
2 Replies
2. Shell Programming and Scripting
I have a single Linux Red Hat 8.0 server with two external disk arrays (each a raid) connected via SCSI. The OS/boot/swap is on an internal set of disks and should not be affected by this process.
I need to move all of my data from one disk array to another while keeping all of my 30 or so... (0 Replies)
Discussion started by: kenisswell
0 Replies
3. Solaris
I have an ultra 10 system, and am trying to install and verify a previously cloned hard drive, to make sure it works, that it really is a duplicate of the hard drive currently on an other server, etc.
I plugged in this cloned hard drive as master, only drive in the system.
No network LAN... (2 Replies)
Discussion started by: HikerLT
2 Replies
4. UNIX for Dummies Questions & Answers
Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
Discussion started by: Asheley Ryan
4 Replies
5. AIX
Why is one of my blade hanging and does nothing after trying to boot from CD???
==================
I tried to press 1....JS20 does not support SMS menu
Here's what I see after 30 minutes...
-------------------------------------------------------------------------------
... (0 Replies)
Discussion started by: mifch
0 Replies
6. Solaris
Hi, guys
I am a super newbie in solaris admin....
Now I got a problem.
Due to the broken of one of Raid system, some user home directory is missing.
Someone advises me to relocate the home directory on the new drive.
I have googled and have tried " usermode -d " command.
But I found a... (3 Replies)
Discussion started by: dr_dw
3 Replies
7. Linux
Hi guys,
i explain my problem:
I've FC10 64bit installed on a server Dell R410.
When i boot the system with eth0 or eth1 linked (only one eth linked), all work fine and the system start normally.
When i boot the system with eth0 + eth1 linked,
the system hang when the rpcind service... (1 Reply)
Discussion started by: andreaden
1 Replies
8. Red Hat
Hello,
Sometime i see that the boot process hangs.
I am using rhel 6.2.
At that time in the console i see
Probing EDD (edd=off to disable)...
SSH service seems to be started but i can't login...
ssh logs (last lines) in verbose mode level 3:
debug2: we did not send a packet,... (3 Replies)
Discussion started by: @dagio
3 Replies
9. Solaris
Hi,
I am planning on building a Solaris 11.2 based ZFS file server. The hardware I have chosen is the following:
Mobo: Supermicro X10SL7-F (with integrated 'LSI SAS 2308' controller)
CPU: Intel i3-4150
RAM: 16GB ECC (brand/model is certified by Supermicro)
# I will flash the... (2 Replies)
Discussion started by: tubiman
2 Replies
LEARN ABOUT OPENSOLARIS
mega_sas
mega_sas(7D) Devices mega_sas(7D)
NAME
mega_sas - SCSI HBA driver for LSI MegaRAID SAS controller
DESCRIPTION
The mega_sas MegaRAID controller host bus adapter driver is a SCSA-compliant nexus driver that supports the Dell PERC 5/E, 5/i, 6/E and
6/i RAID controllers, the IBM ServeRAID-MR10k SAS/SATA controller and the LSI MegaRAID SAS/SATA 8308ELP, 8344ELP, 84016E, 8408ELP,
8480ELP, 8704ELP, 8704EM2, 8708ELP, 8708EM2, 8880EM2 and 8888ELP series of controllers.
Supported RAID features include RAID levels 0, 1, 5, and 6, RAID spans 10, 50 and 60, online capacity expansion (OCE), online RAID level
migration (RLM), auto resume after loss of system power during arrays, array rebuild or reconstruction (RLM) and configurable stripe size
up to 1MB. Additional supported RAID features include check consistency for background data integrity, patrol read for media scanning and
repairing, 64 logical drive support, up to 64TB LUN support, automatic rebuild and global and dedicated hot spare support.
CONFIGURATION
The mega_sas.conf file contains no user configurable parameters. Please configure your hardware through the related BIOS utility or the
MegaCli configuration utility. If you want to install to a drive attached to a mega_sas HBA, you should create the virtual drive first
from the BIOS before running the Solaris install. You can obtain the MegaCli utility from the LSI website.
The mega_sas device can support up to 64 virtual disks. Note that BIOS numbers the virtual disks as 1 through 64, however in the Solaris
operating environment virtual disks are numbered from 0 to 63. Also note that SAS and SATA drives cannot be configured into the same vir-
tual disk.
KNOWN PROBLEMS AND LIMITATIONS
The mega_sas driver does not support the LSI MegaRAID SAS 8204ELP, 8204XLP, 8208ELP, and 8208XLP controllers.
FILES
/kernel/drv/mega_sas 32-bit ELF kernel module. (x86)
/kernel/drv/amd64/mega_sas 64-bit kernel module. (x86)
/kernel/drv/mega_sas.conf Driver configuration file (contains no user-configurable options).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86-based systems |
+-----------------------------+-----------------------------+
|Availability |SUNWmegasas |
+-----------------------------+-----------------------------+
|Interface stability |Uncommitted |
+-----------------------------+-----------------------------+
SEE ALSO
prtconf(1M), attributes(5), sata(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S),
scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.11 14 Aug 2008 mega_sas(7D)