NIC detection problem in solaris Post: 302535068

9 More Discussions You Might Find Interesting

1. IP Networking

not able to add nic in solaris 8

Hi Folks, I've just installed solaris 8, but i cannot add my network card. i've reboot the box, got into the configmode, and try'd to add a network card. but it doesn't work. I can't add a ip address to the card, an error occurs. Who do i add it. Kind Regards

2. UNIX for Dummies Questions & Answers

SuSE 8.1 NIC problem

i have just installed suse 8.1 on a third computer which has an Asus p4s8x with onboard NIC and sound. now, on install suse detected everything automatically with no probelm, however upon reboot the sound failed to load as well as the network card. /dev/eth* doesnt exist. i looked in the bios and...

3. UNIX for Dummies Questions & Answers

nic problem

hello friends i am using x86 pc i can install solaris o/s but nic card is not deceting. i am not able see in file called /etc/path_to_inst. i did /touch reconfigu and devfsadm also. i used external nic card also realtech 8169d am using gigabyte mother board 775.

4. UNIX for Dummies Questions & Answers

usb hdd detection problem

I have seagate USB 2.0 HDD which was working good on my windows system Recently I have started using red hat Linux 2.6.9-55.0.12.EL (i686 i686 i386 GNU/Linux) The USB is not at all detected in Linux even if I reboot with it attached to the PC. The same can be detected on any Windows system. ...

5. Solaris

NIC problem

can anyone help me fix this? what command should I use to bring them back to "TRUE"? Interface Speed Duplex Autoneg --------- ----- ------ ------- ce0 100 Mbit/s FULL FALSE ce5 100 Mbit/s FULL ...

6. Solaris

NIC drivers+solaris 10

Installed solaris 10 and now i want to connect to internet,to make work this i need to NIC drivers can some body tell me is it possible to get drivers and how to install. I am dying to get rid of this problem..please help me

7. Programming

Parallel Processing Detection and Program Return Value Detection

Hey, for the purpose of a research project I need to know if a specific type of parallel processing is being utilized by any user-run programs. Is there a way to detect whether a program either returns a value to another program at the end of execution, or just utilizes any form of parallel...

8. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux...

9. Solaris

Carrier Detection in Solaris 8 for Dial in and Null Modem Connections

I am having troubles with carrier detection for dialing in via a modem or direct connection via a null modem connection under Solaris 8 (i.e. login session remains active after the modem disconnects). I tried two different dumb modems (which do not respond to AT commands) on the machine that I am...

LEARN ABOUT CENTOS

dh_auto_install

DH_AUTO_INSTALL(1)						     Debhelper							DH_AUTO_INSTALL(1)

NAME

       dh_auto_install - automatically runs make install or similar

SYNOPSIS

       dh_auto_install [buildsystemoptions] [debhelperoptions] [--params]

DESCRIPTION

       dh_auto_install is a debhelper program that tries to automatically install built files. It does so by running the appropriate command for
       the build system it detects the package uses. For example, if there's a Makefile and it contains a install target, then this is done by
       running make (or MAKE, if the environment variable is set). If there is a setup.py or Build.PL, it is used. Note that the Ant build system
       does not support installation, so dh_auto_install will not install files built using Ant.

       Unless --destdir option is specified, the files are installed into debian/package/ if there is only one binary package. In the multiple
       binary package case, the files are instead installed into debian/tmp/, and should be moved from there to the appropriate package build
       directory using dh_install(1).

       DESTDIR is used to tell make where to install the files.  If the Makefile was generated by MakeMaker from a Makefile.PL, it will
       automatically set PREFIX=/usr too, since such Makefiles need that.

       This is intended to work for about 90% of packages. If it doesn't work, or tries to use the wrong install target, you're encouraged to skip
       using dh_auto_install at all, and just run make install manually.

OPTIONS

       See "BUILD SYSTEM OPTIONS" in debhelper(7) for a list of common build system selection and control options.

       --destdir=directory
	   Install files into the specified directory. If this option is not specified, destination directory is determined automatically as
	   described in the "DESCRIPTION" section.

       -- params
	   Pass params to the program that is run, after the parameters that dh_auto_install usually passes.

SEE ALSO

       debhelper(7)

       This program is a part of debhelper.

AUTHOR

       Joey Hess <joeyh@debian.org>

11.1.6ubuntu2							    2018-05-10							DH_AUTO_INSTALL(1)