Hi,
I am using following command to convert from ebcdic to ascii :-
dd if=input_file of=out_file conv=ascii
but, since input_ile itself is 10 GB big, out_file becomes around 2 to 3 times bigger... got space restrictions in the env..
I am stuck .. any help ..??
Finder255 (4 Replies)
Hi,
More a Sun T5220 problem then a Solaris 10 problem, but perhaps someone had a similar issue.
For starters the output with 1 disk in slot 0 of the server.
It points to PhyNum 5, where I would expect PhyNum 0.
{0} ok probe-scsi
MPT Version 1.05, Firmware Version 1.22.00.00
Target... (2 Replies)
Hi All,
Linux 86x64bits Red Hat Linux O/S
Could someone please check and let me know if the shell script has any syntax error as it's not sending mails
Shell script:
cat dataspace.sh
#!/bin/bash
export DBALIST="xyz@abc.com"
export data_capacity
df -k /oradata > dfk.result... (18 Replies)
Hi,
I have a query , is it possible that few LUNs presented to the Solaris OS which are in the unlabeled state can hung EVA frame and cause it to get unresponsive ?
please help.
thanks. (1 Reply)
Hi,
This is follow up to the post https://www.unix.com/aix/233361-san-disk-appearing-double-aix.html
When I connected Pseries Machine HBA Card ( Dual Port ) directly to the SAN Storage DS4300 , I was able to see Host Port Adapter WWN numbers , although I was getting this message... (2 Replies)
Discussion started by: filosophizer
2 Replies
LEARN ABOUT NETBSD
iy
IY(4) BSD Kernel Interfaces Manual IY(4)NAME
iy -- Intel EtherExpress PRO/10 Ethernet driver (Intel i82595)
SYNOPSIS
iy0 at isa? port {port} irq ?
DESCRIPTION
The iy device driver supports the EtherExpress PRO/10 card, and might support other ISA cards using the same chip.
MEDIA SELECTION
The different models of the supported boards come with some subset of RJ-45, BNC and AUI connectors. Supported media include:
AUI/DIX Standard 15 pin connector
10Base2 BNC, also known as thin-net
10BaseT UTP, also known as twisted pair
The default port to use is the port the card autodetects at ifconfig up time. To choose an alternative port, an explicit medium can be spec-
ified to ifconfig(8) or in your ifconfig.iy? file.
NOTES
The EtherExpress PRO card has no jumpers to set the address. Intel supplies software to set the address of the card in software. You have
to hardwire this address in your kernel configuration file.
SEE ALSO ed(4), eg(4), el(4), ep(4), intro(4), ix(4), le(4), ifconfig(8)STANDARDS
are great. There's so many to choose from.
BSD May 22, 1996 BSD