My WS boot disk has failed so when i want to boot system (by OK boot -s or Ok boot disk0 ) i get these mesgs:
disk read error
boot :can not find misc/sparc9v/krtld
boot:error loading interperetor (misc/sparc9v/krtld)
Elf64 read error.
boot failed.
although it's probed ,finally i try... (1 Reply)
My root disk is failed and how to replace the root disk in AIX.
Can u give a detailed explanation in step wise.
Pls give the answer taking different scenarios.
Regards
Praveen (1 Reply)
Hi All,
Seems to be one of the disk has failed on my Solaris server.
How do i confirm that disk has really failed or not?
Here are alert details.
-------
iostat -En out/put
c1t3d0 Soft Errors: 1884 Hard Errors: 153 Transport Errors: 54
Vendor: FUJITSU Product:... (3 Replies)
Hi all.
This may be a stupid question but here goes:
I lost a disk on my Sun-Fire 480-r and want to replace it. I don't care about the data, I just need to get a new disk in.
Can anyone supply me with step by step procedure please. I am not an expert by any means and it is a dev box so I... (1 Reply)
Good Evening,
2 years ago, I set up an Ubuntu file-server for a friend, who is a photograph amateur. Basically, the server offers a software RAID-5 that can be accessed remotely from a MAC. Unfortunately, I didn't labeled the hard drives (i.e. which physical drive corresponds to the /dev/sdX... (2 Replies)
Hi Masters,
How to find out the failed disk in redhat linux (OR)
How to decalare whether our hard disk goes bad ?
My option is:
dmesg | grep "failed"
check in /var/log/messages with the kernel error.
Please corrrect me if im wrong.
And also i heard "smartctl" command. But it's... (2 Replies)
I have an oldish Solaris 10 system (SunFire x4240), which due to a recent heating event in the server room, lost it's system disk.
I have rsync backups of all the other (data) disks, but apparently I do not have a backup of /. :-( I can start the machine up in failsafe mode, but running fsck on... (4 Replies)
Iam new to AIX
I am unable varyonvg on the vios,some of the disk are reported as harware failure.
I am going to replace the disk,Please tell me how to remove the disk without any corruption in the VG
lspv -l hdiskx also didn't work (0 Replies)
Hi
Please can you help me on replacing or removing a faulty disk drive on a SUN NETRA X4250server with 4 internal drives only.
the format comand show me the following:
format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <drive type unknown>
... (9 Replies)
Discussion started by: fretagi
9 Replies
LEARN ABOUT XFREE86
libbash
LIBBASH(7) libbash Manual LIBBASH(7)NAME
libbash -- A bash shared libraries package.
DESCRIPTION
libbash is a package that enables bash dynamic-like shared libraries. Actually its a tool for managing bash scripts whose functions you may
want to load and use in scripts of your own.
It contains a 'dynamic loader' for the shared libraries ( ldbash(1)), a configuration tool (ldbashconfig(8)), and some libraries.
Using ldbash(1) you are able to load loadable bash libraries, such as getopts(1) and hashstash(1). A bash shared library that can be loaded
using
ldbash(1) must answer 4 requirments:
1. It must be installed in $LIBBASH_PREFIX/lib/bash (default is /usr/lib/bash).
2. It must contain a line that begins with '#EXPORT='. That line will contain (after the '=') a list of functions that the library
exports. I.e. all the function that will be usable after loading that library will be listed in that line.
3. It must contain a line that begins with '#REQUIRE='. That line will contain (after the '=') a list of bash libraries that are
required for our library. I.e. every bash library that is in use in our bash library must be listed there.
4. The library must be listed (For more information, see ldbashconfig(8)).
Basic guidelines for writing library of your own:
1. Be aware, that your library will be actually sourced. So, basically, it should contain (i.e define) only functions.
2. Try to declare all variables intended for internal use as local.
3. Global variables and functions that are intended for internal use (i.e are not defined in '#EXPORT=') should begin with:
__<library_name>_
For example, internal function myfoosort of hashstash library should be named as
__hashstash_myfoosort
This helps to avoid conflicts in global name space when using libraries that come from different vendors.
4. See html manual for full version of this guide.
AUTHORS
Hai Zaar <haizaar@haizaar.com>
Gil Ran <ril@ran4.net>
SEE ALSO ldbash(1), ldbashconfig(8), getopts(1), hashstash(1)colors(1)messages(1)urlcoding(1)locks(1)Linux Epoch Linux