Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Install Hang OpenServer 6 - SATA CDROM
Operating Systems SCO Install Hang OpenServer 6 - SATA CDROM Post 302532948 by jgt on Wednesday 22nd of June 2011 12:53:59 PM
Old 06-22-2011
Will the disk drives connect directly to the cable from the controller, or is there an intermediate circuit board that might prevent that?
If you can connect two of the drives directly to the LSI card, then make those two, a RAID1 configuration, and system drive 0.
Move the card and the two drives to a desktop system that has a standard IDE configuration, and a suitable PCI express slot (probably the slot for the video card).
Do the install, then add MP4 and OSS714, then move the controller and disks back to the main system. The system will take a long time to boot as it finds the new hardware so be patient (up to 10 minutes).
Set up the additional 5 disks as RAID(?) and system drive 1.
Add back the addtional 12gb of memory, (I presume you have a license for more than 4gb?)
 

10 More Discussions You Might Find Interesting

1. SCO

sco openserver 5.0.2 cdrom

Hello!!!! Salut!!!! I m looking for sco openserver 5.0.2 package to install it on my compaq server prosignia 200. I don't fount it on our local market. Is it possible to me to download it from the net??? Je suis à la recherche de SCO OPENSERVER 5.0.2 pour son installation (requise) sur mon... (2 Replies)
Discussion started by: azeklousaid
2 Replies

2. UNIX for Advanced & Expert Users

trying to setup a sata drive using a sata to scsi adaptor

trying to setup a sata drive using a sata to scsi adaptor I have a sata 1TB Deskstar that I had setup before and during shipment from a facilty to another, the disk failed. The handling was not great, lots of throwing boxes, etc. I have a new disk from Hitachi (thankyou Hitachi) anyway, I don't... (1 Reply)
Discussion started by: mndavies
1 Replies

3. Solaris

x86 Install stops with a /cdrom error

Hi, I have a DVD burned iso image of Solaris 10 for x86 and trying to install it on an PowerSpec PC with 2 - DVD drives. The DVD image won't boot from the top DVD drive so I put it in the second one and it boots. The installation gets to the following prompt: "You may need to manually eject the... (2 Replies)
Discussion started by: rpollard001
2 Replies

4. SCO

SATA Hard Disk support by SCO OpenServer 5.05

Is SATA hard disk is suooprted by SCO OpenServer 5.05? If No, how to couter this problem. If yes, please provide the installation steps. (2 Replies)
Discussion started by: rakeshkumar9919
2 Replies

5. Solaris

Boot cdrom - install

Hi community, Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ? Thank you very much:D (3 Replies)
Discussion started by: Sunb3
3 Replies

6. Hardware

Connect SATA Laptop HardDrive to Desktop SATA Slots

Hello everybody, I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors. The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my... (4 Replies)
Discussion started by: Zykl0n-B
4 Replies

7. Hardware

Question on SATA 300 vs SATA 600

I have an upgrade path in mind for a new computer that will be stocked with a 2TB SATA 300 hard disk. This is a choice based on information that SATA 300 is not necessarily faster than SATA 600. The upgrade path in a year time or so would then involve the purchase of an SSD that would contain the... (4 Replies)
Discussion started by: figaro
4 Replies

8. Solaris

HOW TO INSTALL os from cdrom from console?

Hi all, I need to do installation via console , a image is stored in cdrom. The OS is Sun Solaris , Please tell me how to go about it. I just need to know the first command and thereafter. Please advise. Thanks Manali (5 Replies)
Discussion started by: manalisharmabe
5 Replies

9. SCO

SCO 6.0.0 hangsat install cdrom verify

Installing SCO 6.0.0 on a Supermico server. Has an LSI 9240-8i MegaRaid SAS controller using the megasas drivers. Created a driver diskette and it loads the drivers in first part of install OK. When all drivers are loaded it starts the installation process and it hangs with the "... verify (cdrom)"... (4 Replies)
Discussion started by: adacomp
4 Replies

10. UNIX for Beginners Questions & Answers

Sco openserver 6 on hd sata: cloning

Good evening, I should make a full image copy of the 1 terabyte hard drive on an HP WX4600 workstation and is present as the only Sco OpenServer 6 operating system, which I need to run a very old corporate accounting program. Logically, Sco OpenServer 6 on this workstation has been regularly... (7 Replies)
Discussion started by: NIGHTPRINCE79
7 Replies

LEARN ABOUT OPENSOLARIS

si3124

si3124(7D)							      Devices								si3124(7D)

NAME

       si3124 - SiliconImage 3124/3132 SATA controller driver

SYNOPSIS

       sata@unit-address

DESCRIPTION

       The  si3124 driver is a SATA framework-compliant HBA driver that supports Silicon Image 3124 and 3132 SATA controllers. Note that while the
       Silicon Image controllers supports standard SATA features including SATA-II disks, NCQ, hotplug,  port  multiplier  and	ATAPI  disks,  the
       si3124 driver currently does not support NCQ, port multiplier or ATAPI features.

CONFIGURATION

       There are no tunable parameters in the si3124.conf file.

FILES

       /kernel/drv/si3124	   32-bit ELF kernel module (x86).

       /kernel/drv/amd64/si3124    64-bit ELF kernel module. (x86).

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |x86			   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWsi3124		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       cfgadm(1M), prtconf(1M), cfgadm_sata(1M), attributes(5), nv_sata(7D), sata(7D)

       Writing Device Drivers

SunOS 5.11							  17 August 2007							si3124(7D)
All times are GMT -4. The time now is 10:31 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy