06-20-2011
save resolv.conf in linux
Hi,
I use red hat Es 5.5 64 bit..
I find the item nameserver in resolv.conf cannnot be saved.
Everytime ,reboot or restart the netwrok service .
The data in resolv.conf will be removed and clear .
I need to edit it again .
I also try to add DNS1=XX.XX.XX.Xx in ifcfg-eth2 but the same problem
in it , the resolv.conf is still need to edit every network service restart .
So, how to save the resolve.conf about nameserver forever ??
Please advice ...
[root@vls etc]# cat resolv.conf
# Generated by NetworkManager
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com
nameserver 10.1.1.2
nameserver 218.102.32.208
`
[root@vls etc]#
==========
[root@vls network-scripts]# cat ifcfg-eth2
# Intel Corporation 82572EI Gigabit Ethernet Controller (Copper)
DEVICE=eth2
BOOTPROTO=none
BROADCAST=10.1.255.255
HWADDR=00:80:82:8F:B4:A2
IPADDR=10.1.1.82
NETMASK=255.255.0.0
NETWORK=10.1.0.0
ONBOOT=yes
GATEWAY=10.1.1.249
TYPE=Ethernet
USERCTL=yes
IPV6INIT=no
PEERDNS=no
[root@vls network-scripts]#
9 More Discussions You Might Find Interesting
1. IP Networking
I am new to unix. I have edited the /etc/resolv.conf. It shows
domain name
ip address
ip address
These are the same ips of the dns I use for windows. Still I get no name resolution on the internet. I can ping external ip's is there anything else I need to check? (1 Reply)
Discussion started by: rpnhavoc
1 Replies
2. UNIX for Dummies Questions & Answers
Hi ,,still struggling with unix ,,the system is running sco openserver release 5 and have dsl installed ,, the dsl modem is a bt router which in turn is connected to a vpn hardware router,, which also serves internet to the whole network ,, but i still cant connect to the internet via the unix box... (10 Replies)
Discussion started by: b03der
10 Replies
3. SuSE
I want to have 7 search domains in my resolv.conf, but it seems to like only the first six.
I read somewhere that the OS will only recognize the first 6 (or the first 154 characters). Is that the case with SUSE 10?
thx
-Kevin (2 Replies)
Discussion started by: kjbaumann
2 Replies
4. Shell Programming and Scripting
HI ALL
I am making a script,That will does the following,I am in search of ideas
1.Script will comment all existing the entries in resolve.conf
2.Add new entries like this
abc.example.com
192.168.1.x
I can use sed to add comment. (8 Replies)
Discussion started by: aliahsan81
8 Replies
5. UNIX for Dummies Questions & Answers
Hi everyone
A quick question during a audit this was determined to be a security issue
In the resolv.conf there is a “.” At the end of the domain name
Like this
domain mydomain.com.
I which to understand the function or significance of the .
thk (3 Replies)
Discussion started by: Ex-Capsa
3 Replies
6. Ubuntu
Hi,
My resolv.conf keeps overwritten. I want to have it to just keep the setting that I put in there. I tried a few solutions I found using google.
like supersede domain-name "xxx", prepend domain-name-servers xxx.xxx.xxx.xxx;
This does'nt work.
I also tried to just chmod the file to... (4 Replies)
Discussion started by: jld
4 Replies
7. Red Hat
Hi all, :(
I am facing issue while I have updated in resolv.conf, after nework service restart, it was automatically deleted IP from resolv.conf file.
Could you please let me know what is the reason resolv.conf deleted any IP which I have manually updated, but it store only my router IP... (3 Replies)
Discussion started by: Pradipta Kumar
3 Replies
8. Linux
After vpn connection,I am not able to resolve any machines in remote gateway.It looks like remote domain is added to domain field instead of adding it to the Search field in /etc/resolv.conf
I want the remote domain to add to search field along with local domain.Can anyone tell a bash or script... (2 Replies)
Discussion started by: jeremy_brett
2 Replies
9. Solaris
Hi,
I've installed Solaris 11.3(live media) and configured DNS. Everytime I reboot the server, resolv.conf got deleted and it created a new nsswitch.conf.
I used below to configure both settings:
# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (xx.xx.xx.aa... (1 Reply)
Discussion started by: flexihopper18
1 Replies
LEARN ABOUT ULTRIX
resolv.conf
resolv.conf(5) File Formats Manual resolv.conf(5)
Name
resolv.conf - resolver configuration file
Description
The resolver configuration file, contains information that the resolver routines read the first time they are invoked by a process. The
resolver file contains ASCII text and lists the name-value pairs that provide various types of resolver information.
The file is required if your system is running BIND. This file must contain the BIND domain name for the local area network. If your sys-
tem is a BIND client, this file must also contain nameserver entries.
There are two entry formats for the file:
domain binddomain
This line specifies the default domain to append to local host names. If no domain entries are present, the domain returned by
after the first dot (.) is used. If the host name does not contain a domain, the root domain is assumed.
nameserver address
In this entry, the address is the IP address, in dot notation, of the BIND server that should be queried to resolve host name and
address information. You should have at least one name server listed. Two or more name servers reduces the possibility of inter-
rupted BIND service in the event that one of the servers is down. You can list up to (10) name servers. If more than one server is
listed, the resolver library queries you to try them in the order listed. If no name server entries are present, the default is to
use the name server on the local machine.
The algorithm used is to try a name server, and, if the query times out, to try the next, until out of name servers or the query is
resolved. The last step is to repeat trying all the name servers until a maximum number of retries has been made or the query has
been resolved.
The name value pair must appear on a single line, and the keyword or must start each line.
Examples
The following is an example of a file:
;
; Data file for a client
;
domain cities.us
nameserver 128.11.22.33
Lines beginning with a semicolon (;) are comment lines.
Files
See Also
gethostname(2), resolver(3), named(8)
Guide to the BIND Service
resolv.conf(5)