Sponsored Content
Full Discussion: save resolv.conf in linux
Operating Systems Linux Red Hat save resolv.conf in linux Post 302532099 by chuikingman on Monday 20th of June 2011 12:08:18 AM
Old 06-20-2011
error in linux when restart network service

hi,
I use red hat linux .
When I start up network service .
I get below error in eth2
root@vls etc]# service network restart
Shutting down interface eth2: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth2: RTNETLINK answers: File exists
Error adding address 10.1.1.82 for eth2.
[ OK ]
I paste the ifcfg-eth2 in here
[root@vls network-scripts]# cat ifcfg-eth2
# Intel Corporation 82572EI Gigabit Ethernet Controller (Copper)
DEVICE=eth2
BOOTPROTO=none
BROADCAST=10.1.255.255
HWADDR=00:80:82:8F:B4:A2
IPADDR=10.1.1.82
NETMASK=255.255.0.0
NETWORK=10.1.0.0
ONBOOT=yes
GATEWAY=10.1.1.249
TYPE=Ethernet
USERCTL=yes
IPV6INIT=no
PEERDNS=yes
So, what is the problem oif error adding address ??
Please advice

 

9 More Discussions You Might Find Interesting

1. IP Networking

/etc/resolv.conf

I am new to unix. I have edited the /etc/resolv.conf. It shows domain name ip address ip address These are the same ips of the dns I use for windows. Still I get no name resolution on the internet. I can ping external ip's is there anything else I need to check? (1 Reply)
Discussion started by: rpnhavoc
1 Replies

2. UNIX for Dummies Questions & Answers

dns and resolv.conf

Hi ,,still struggling with unix ,,the system is running sco openserver release 5 and have dsl installed ,, the dsl modem is a bt router which in turn is connected to a vpn hardware router,, which also serves internet to the whole network ,, but i still cant connect to the internet via the unix box... (10 Replies)
Discussion started by: b03der
10 Replies

3. SuSE

Suse 10 resolv.conf

I want to have 7 search domains in my resolv.conf, but it seems to like only the first six. I read somewhere that the OS will only recognize the first 6 (or the first 154 characters). Is that the case with SUSE 10? thx -Kevin (2 Replies)
Discussion started by: kjbaumann
2 Replies

4. Shell Programming and Scripting

resolv.conf

HI ALL I am making a script,That will does the following,I am in search of ideas 1.Script will comment all existing the entries in resolve.conf 2.Add new entries like this abc.example.com 192.168.1.x I can use sed to add comment. (8 Replies)
Discussion started by: aliahsan81
8 Replies

5. UNIX for Dummies Questions & Answers

resolv.conf

Hi everyone A quick question during a audit this was determined to be a security issue In the resolv.conf there is a “.” At the end of the domain name Like this domain mydomain.com. I which to understand the function or significance of the . thk (3 Replies)
Discussion started by: Ex-Capsa
3 Replies

6. Ubuntu

resolv.conf

Hi, My resolv.conf keeps overwritten. I want to have it to just keep the setting that I put in there. I tried a few solutions I found using google. like supersede domain-name "xxx", prepend domain-name-servers xxx.xxx.xxx.xxx; This does'nt work. I also tried to just chmod the file to... (4 Replies)
Discussion started by: jld
4 Replies

7. Red Hat

Issue on resolv.conf

Hi all, :( I am facing issue while I have updated in resolv.conf, after nework service restart, it was automatically deleted IP from resolv.conf file. Could you please let me know what is the reason resolv.conf deleted any IP which I have manually updated, but it store only my router IP... (3 Replies)
Discussion started by: Pradipta Kumar
3 Replies

8. Linux

Bash to append domain in search field of resolv.conf after vpnc connection in Linux

After vpn connection,I am not able to resolve any machines in remote gateway.It looks like remote domain is added to domain field instead of adding it to the Search field in /etc/resolv.conf I want the remote domain to add to search field along with local domain.Can anyone tell a bash or script... (2 Replies)
Discussion started by: jeremy_brett
2 Replies

9. Solaris

Configure resolv.conf and nsswitch.conf

Hi, I've installed Solaris 11.3(live media) and configured DNS. Everytime I reboot the server, resolv.conf got deleted and it created a new nsswitch.conf. I used below to configure both settings: # svccfg -s dns/client svc:/network/dns/client> setprop config/nameserver = (xx.xx.xx.aa... (1 Reply)
Discussion started by: flexihopper18
1 Replies
Match-all classifier in tc(8)                                          Linux                                         Match-all classifier in tc(8)

NAME
matchall - traffic control filter that matches every packet SYNOPSIS
tc filter ... matchall [ skip_sw | skip_hw ] [ action ACTION_SPEC ] [ classid CLASSID ] DESCRIPTION
The matchall filter allows to classify every packet that flows on the port and run a action on it. OPTIONS
action ACTION_SPEC Apply an action from the generic actions framework on matching packets. classid CLASSID Push matching packets into the class identified by CLASSID. skip_sw Do not process filter by software. If hardware has no offload support for this filter, or TC offload is not enabled for the inter- face, operation will fail. skip_hw Do not process filter by hardware. EXAMPLES
To create ingress mirroring from port eth1 to port eth2: tc qdisc add dev eth1 handle ffff: ingress tc filter add dev eth1 parent ffff: matchall skip_sw action mirred egress mirror dev eth2 The first command creats an ingress qdisc with handle ffff: on device eth1 where the second command attaches a matchall filters on it that mirrors the packets to device eth2. To create egress mirroring from port eth1 to port eth2: tc qdisc add dev eth1 handle 1: root prio tc filter add dev eth1 parent 1: matchall skip_sw action mirred egress mirror dev eth2 The first command creats an egress qdisc with handle 1: that replaces the root qdisc on device eth1 where the second command attaches a matchall filters on it that mirrors the packets to device eth2. To sample one of every 100 packets flowing into interface eth0 to psample group 12: tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: matchall action sample rate 100 group 12 SEE ALSO
tc(8), iproute2 21 Oct 2015 Match-all classifier in tc(8)
All times are GMT -4. The time now is 12:13 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy