I'm having trouble getting my WIFI card to work. It's Device ID is :0c:00.0 0280: 14e4:4315 (rev 01). My OS is BT5. The card works with Lucid just fine. I've gone to the Hardware drivers to try and download it but when I try I always get this:
I've gone to the broadcomm site and tried what it says in the readme.txt. When I try this:
First of all, excuse my ignorance in my questions, but truth is, I know nothing about Unix. I have recently purchased some A7012A's (dual port, 1000 base T/X) gigabit cards and need to use them in a windows environment.
I am trying to see if it is possible to have drivers written for the card... (0 Replies)
Hi All,
SUN emulex HBA card has been installed on P520 box.
When i run the cfgmgr i am getting the following message.
lpar2#cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.... (0 Replies)
hi,
would anyone know where to get a Linux ( Red Hat ) driver for a SafeCom ( i.e. Texas Instruments ) 11g WLAN card SWLPT 54108 ?
It's quite an old card that only seems to come with windows drivers on its install disk.
thanks,
Jim (1 Reply)
I have OptiPlex machine which has Integrated Intel® I217LM Ethernet LAN 10/100/1000 interface. When I am trying to install Solaris 10U11 during the installation it dint ask for networking configuration. I installed the OS and found that Solaris dont show any interface through ifconfig -a plumb.... (7 Replies)
Hi Everybody,
Goal:
From my backup box on my local network, knowing the Wifi MAC address of my laptop, I would like to dynamically identify which ip address is attributed to my laptop.
The aim is to store this ip address in a local variable and that this information is retrieved by another... (11 Replies)
Hi, I am Konrad , I am a new user of this forum.
I am from Poland, so my English isn't good enough. So please be forgiving for me.
I read about Bits club or something like that, So I don't know, that I am allowed to write here.
But nevertheless I have faced with small problem with wifi driver on... (4 Replies)
I'm looking for driver for SunSAI/P 3.0 (Serial Asynchronous Interface) card X2156A for Solaris. It used to be on sun-solve, but I fail to find it on the Oracle site. Any help would be very appreciated! (1 Reply)
I have hp dv6 and dv7 notebook pcs on which I want to upgrade the wifi cards but when I install the new cards and boot them, the they won't even boot to the bios and they both give me the same error: "104-Unsupported wireless network device detected. System Halted. Remove device and restart." When... (1 Reply)
After installing the latest version of Kali on my Lenovo S21E laptop, I cannot access the internet.
wlan0 does not show up in ifconfig and I cannot connect to the internet.
If you need any other additional information, I will provide it. Thank you kindly. (8 Replies)
Discussion started by: Hotrod22
8 Replies
LEARN ABOUT REDHAT
dummy_cs
DUMMY_CS(4) Kernel Interfaces Manual DUMMY_CS(4)NAME
dummy_cs - PCMCIA dummy device driver
SYNOPSIS
insmod dummy_cs.o [pc_debug=n] [free_ports=n] [irq_list=i,j,...]
DESCRIPTION
The dummy_cs module has two purposes. It is intended as a demonstration of how to write the PCMCIA interface code for a client driver, and
the source code is heavily commented. It is also written to function as a sort of generic ``point enabler'': when bound to any PCMCIA IO
card, it will read the card's Configuration Information Structure, and configure the card appropriately. The configuration includes set-
ting up IO and memory windows, configuring the card for interrupts, and initializing the card's PCMCIA configuration registers.
It turns out that many cards report incomplete or inaccurate configuration information, due to vendor carelessness and the complexity of
the data format. A vendor driver can generally take for granted many configuration details, so there is not much incentive for vendors to
ensure that the on-card information is complete. Thus, the dummy_cs module is limited by its generality: since it makes no assumptions
about card types, it is forced to rely on the card information, for better or worse.
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
free_ports=n
A flag indicating if the IO ports allocated for the card should be freed from the kernel resource maps. This is useful if the dummy
driver is being used to configure a card in preparation for loading a specific PCMCIA-unaware driver. The default is 0 (false).
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
AUTHOR
David Hinds - dahinds@users.sourceforge.net
SEE ALSO cardmgr(8), pcmcia(5).
pcmcia-cs 2000/06/12 21:24:47 DUMMY_CS(4)