Sponsored Content
Top Forums UNIX for Advanced & Expert Users Linux on vmware won't boot due to corrupt library file! Post 302531416 by Corona688 on Thursday 16th of June 2011 05:27:50 PM
Old 06-16-2011
What does fdisk -l show you in the rescue disk? What's in /sys/class/block? Does it mention any devices in dmesg? Linux must have been able to access the disk in the first place somehow to get installed in the first place...
This User Gave Thanks to Corona688 For This Post:
 

10 More Discussions You Might Find Interesting

1. Solaris

Solaris (9) won't boot!

Hi, I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed: Boot device: net file and args: Network link setup failed Please check cable and try... (3 Replies)
Discussion started by: alarmcall
3 Replies

2. Linux

Help! Boot failure - corrupt superblock

Hi everyone, OK, I've made a monumental fsck-up of my linux installation AND I did not backup my data properly (idiot!), so I'm really up the proverbial without a paddle here. Basically the problem is I re-sized my /home partition (hda13) using Partition Magic 8.0, after doing so my mandrake... (0 Replies)
Discussion started by: alarmcall
0 Replies

3. AIX

server won't boot

Hi all , i was trying to upgrade firmware on machine 7028-6E4 and it failed . Now machine does not boot anymore , i can not get SMC menu either ... What are my options ? Thanks, Rahim (1 Reply)
Discussion started by: rahim
1 Replies

4. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies

5. UNIX for Dummies Questions & Answers

Library won't load

Trying to run an X11 executable under Darwin, I keep getting: dyld: Library not loaded: /sw/lib/libglib-1.2.0.dylib Referenced from: /usr/X11R6/bin/wav2rsomac Reason: image not found Trace/BPT trap I can't figure out if this is an error in the way the program is running, or if the... (0 Replies)
Discussion started by: sansan
0 Replies

6. Solaris

ultra 10 boot warning---corrupt label

Hi All, Any idea why i'm having this warning during boot: WARNING: /pci@1f,0/pci@1,1/ide@3/dad@1,0 (dad1): corrupt label - wrong magic number This happens after I added another ide HD and reinstall it from solaris 10 to solaris 8. Thanks in advance. (7 Replies)
Discussion started by: itik
7 Replies

7. UNIX for Dummies Questions & Answers

Linux won't boot

I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed. I tried diffrent Linux distributions, but nothing works. This are the partitions, maybe it's... (12 Replies)
Discussion started by: teis
12 Replies

8. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Discussion started by: bbird
11 Replies

9. Linux

./configure problem for libsf library due to apparently missing libdb library.

Hello, ./configure script fails to configure libsf. Please check the following last few lines of configure script error. checking for db1/db.h... no checking for db.h... yes checking for dbopen in -ldb1... no configure: error: No libdb? No libsf. But find command shows the following; ... (4 Replies)
Discussion started by: vectrum
4 Replies

10. HP-UX

File system full, won't complete boot

Hello, I have a very old hp rp2450 running 11i2 that I had to power off. When turning it back on it hangs with the following message. Would booting into SUM get me any further? I've never used SUM, so I'm asking before I go down that rabbit hole. Thanks for the help. # ## extra content... (1 Reply)
Discussion started by: calabaria
1 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 12:38 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy