Here's a conundrum. I use a ThinkPad (T30) which has a slot on the side for the hard drive. It is very easy to swap this with another hard drive which I keep as a backup. Now when I copy the Linux partition from my (in use) hard drive to the backup one (in my UltraBay slot) it takes only 30 minutes. If instead I copy this partition to my storage drive (in my docking station's drive slot) and save it as a file, the same copying takes 2 and a half hours. How come so much longer? Any thoughts?
From the hard drive to the backup I use this:
From the hard drive to a storage drive I use:
Note that the file size is 18.0GB and the partition size is 28.6GB.
Last edited by pludi; 06-13-2011 at 09:32 AM..
Reason: Additional information added.
hi,
1) is logical partition the same as physical partition except that one is physical and the other is logical?
2) then it must a one to one ratio? (3 Replies)
I presently backup my multi-OS multi-paritition boot drive (fedora core 4/ext3, WinXPServer/NTFS, WinXPHome/FAT32) with the command:
telinit 1; cp /dev/sda /dev/sdb
And this works.
Is there a command to only copy a single partition instead of an entire device?
And what about the grub... (12 Replies)
I've created a partition with GNU Parted, how do I mount the partition?
The manual information at http://www.gnu.org/software/parted/manual/parted.html is good, but I am sure about how I mount the partition afterwards.
Thanks,
--Todd (1 Reply)
Scenario:
I would want to copy my / to /mnt, and to avoid recursion exclude /mnt.
cp -avx / /mnt
If i use the above i believe it would run recursively, and end up in mess. So how to do it ?!
Basically this / is sda1, and /mnt is sda2 and sda1 is where only OS is available & currently... (2 Replies)
I have found a question from the exercises of my study mat. The question is
"Why are there a in-core copy and a disk-copy of i-node block and super block?"
If any one know the proper answer then please send me..... (1 Reply)
This is now a larger script than I would customarily post. But many folks have become accustom to getting it off this forum.
Every couple of years I update my favorite scripts. This script is one that I use regularly and have posted older versions every couple of years. I noticed that it has... (3 Replies)
Gentleman,
Please move if I have chose the incorrect forum section. I am trying to move data that is not backed up from partition 1 to partition 2 on a SAN that has a GFS2 filesystem. Since the data is not backed up I am rsyncing this data and once verified I will delete from the source... (6 Replies)
hi all
while formatting hard disk i am getting following error.
Partition 1 ends at 266338338
It must be between 34 and 143374704.
label error: EFI Labels do not support overlapping partitions
Partition 8 overlaps partition 1.
Warning: error writing EFI.
Label failed.
I have formatted the... (2 Replies)
Hi Experts
I would like to know different between soft partition concept and hard partition concept on solaris.
Here is little explanation between soft partition concept and hard partition concept on solaris.
Soft Partition:
1TB total space available in storage in all mapped to the OS to... (2 Replies)
Hello All,
I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows,
/boot - Linux Partition & another is
LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc).
Here my requirement is to take out 1GB of space from LVM ( Any logical... (5 Replies)
Discussion started by: gr8_usk
5 Replies
LEARN ABOUT DEBIAN
fdisk
CFDISK(8) GNU fdisk Manual CFDISK(8)NAME
GNU fdisk, lfdisk, gfdisk - manipulate partition tables on a hard drive
SYNOPSIS
fdisk [options] [device]
DESCRIPTION
fdisk is a disk partition manipulation program, which allows you to create, destroy, resize, move and copy partitions on a hard drive using
a menu-driven interface. It is useful for organising the disk space on a new drive, reorganising an old drive, creating space for new oper-
ating systems, and copying data to new hard disks. For a list of the supported partition types, see the --list-partition-types option
below.
It comes in two variants, gfdisk and lfdisk. Lfdisk aims to resemble Linux fdisk 2.12, while gfdisk supports more advanced disk operations,
like resizing the filesystem, moving and copying partitions. When starting fdisk, the default is to run gfdisk.
OPTIONS -h, --help
displays a help message.
-v, --version
displays the program's version.
-L, --linux-fdisk
turns on Linux fdisk compatibility mode. This is the same as running lfdisk.
-G, --gnu-fdisk
turns off Linux fdisk compatibility mode.
-i, --interactive
where necessary, prompts for user intervention.
-p, --script
never prompts for user intervention.
-l, --list
lists the partition table on the specified device and exits. If there is no device specified, lists the partition tables on all
detected devices.
-r, --raw-list
displays a hex dump of the partition table of the disk, similar to the way Linux fdisk displays the raw data in the partition table.
-u, --sector-units
use sectors, instead of cylinders for a default unit.
-s, --size=DEVICE
prints the size of the partition on DEVICE is printed on the standard output.
-t, --list-partition-types
displays a list of supported partition types and features.
The following options are available only to lfdisk.
-b, --sector-size=SIZE
Specify the sector size of the disk. Valid values are 512, 1024 and 2048. Should be used only on older kernels, which don't guess
the correct sector size.
-C, --cylinders=CYLINDERS
Specify the number of cylinders of the disk. Currently does nothing, it is left for Linux fdisk compatibility.
-H, --heads=HEADS
Specify the number of heads of the disk. Reasonable values are 255 or 16.
-S, --sectors=SECTORS
Specify the number of sectors per track. A reasonable value is 63.
BUGS
Before editing a BSD disklabel, the partition with the disklabel should already exist on the disk and be detected by the OS. If you have
created a BSD-type partition, you need to write the changes to the disk. If fdisk fails to notify the OS about the changes in partition ta-
ble, you need to restart your computer. As fdisk tries to guess the device holding the BSD disklabel, it might fail to edit it at all, even
if the OS has detected it. In this case you are adviced to simply open the device with fdisk directly. It is possible that it doesn't work
on some operating systems.
Getting the size of a partition with -s might fail, if fdisk fails to guess the disk device, for the same reasons as with the previous bug.
SEE ALSO mkfs(8), cfdisk(8), parted(8) The fdisk program is fully documented in the info(1) format GNU fdisk User Manual manual.
fdisk 18 August, 2006 CFDISK(8)