Runing VIO and couple lpars on POWER blade.
I want to dedicate graphics adapter(ati0) to one lpar. Is that possible ?
I tried to do that using IVM (I/O Adapter Management->View/Modify Physical Adapters->Modify partition assignment):
Then I tried to do it manually:
Then I saw this local display console device and getty running on it:
So I disabled that process using /etc/inittab and tried again:
I see no more related child devices.
What I'm doing wrong ?
Im newest in unix,
Please, give me solution for installing lan adapter if driver not found in the list of ethernet drivers
ihave unix driver in a dos diskete
please give me the other solution
and tell me where the domain of unix class online, so ican read from it.
Thank's very much (3 Replies)
Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy.
I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this... (4 Replies)
I am running a AIX 4.3.3 and I think the problem lies in my graphics settings. i am getting the following error when tring to run:
xinit usr/dt/bin/Xsession
1362-020 Cannot locate required graphics adapter software.
run 'smit cfgmgr' to install/configure devices added after IPL
Does... (3 Replies)
Hi ,
I am faceing lot of problem due to "disk space is not enough".
senerio is like as,
In system has 5 account.
a,b,c,d,e
say account c if very critical.
Due to other user's data, user 'c' is faceing disk space issue.
I want to dedicate 3 GB for user 'c'.
No user... (1 Reply)
Hi,
I have installed Oracle Enterprise Linux 5 in my PC. After the installation the Ethernet Card is not got detected.
But I could able to get the details using the command lspci -a:
01:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0).
But I could... (4 Replies)
I currently keep a hosts file to make my online banking more secure. But that won’t help in the event of a DNS-cache-poisoning zero-day attack. Is the following solution practical?
Dedicate one browser for secure online banking, and dedicate a different browser for normal browsing of the... (4 Replies)
Howdy
I am trying to install links2 with graphics support on snow leopard 10.6.8 (xcode installed). I have had the program running last year, also installed from source - but then I had installed some image libraries with mac ports and fink - cannot reproduce that setup. Plus I would like to not... (6 Replies)
Hi,
We had a hardware problem with an IBM System p5 server, with AIX 5.2
We restore from a tape the last backup we had, but the server does not boot up as expected.
The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is... (12 Replies)
Discussion started by: trevian3969
12 Replies
LEARN ABOUT OPENDARWIN
consadm
consadm(1m) System Administration Commands consadm(1m)NAME
consadm - select or display devices used as auxiliary console devices
SYNOPSIS
/usr/sbin/consadm
/usr/sbin/consadm [-a device...] [-p]
/usr/sbin/consadm [-d device...] [-p]
/usr/sbin/consadm [-p]
DESCRIPTION
consadm selects the hardware device or devices to be used as auxiliary console devices, or displays the current device. Only superusers are
allowed to make or display auxiliary console device selections.
Auxiliary console devices receive copies of console messages, and can be used as the console during single user mode. In particular, they
receive kernel messages and messages directed to /dev/sysmsg. On Solaris x86 based systems they can also be used for interaction with the
bootstrap.
By default, selecting a display device to be used as an auxiliary console device selects that device for the duration the system remains
up. If the administrator needs the selection to persist across reboots the -p option can be specified.
consadm runs a daemon in the background, monitoring auxiliary console devices. Any devices that are disconnected (hang up, lose carrier)
are removed from the auxiliary console device list, though not from the persistent list. While auxiliary console devices may have been
removed from the device list receiving copies of console messages, those messages will always continue to be displayed by the default con-
sole device.
The daemon will not run if it finds there are not any auxiliary devices configured to monitor. Likewise, after the last auxiliary console
is removed, the daemon will shut itself down. Therefore the daemon persists for only as long as auxiliary console devices remain active.
See eeprom(1M) for instructions on assigning an auxiliary console device as the system console.
OPTIONS
The following options are supported:
-a device Adds device to the list of auxiliary console devices. Specify device as the path name to the device or devices to be added
to the auxiliary console device list.
-d device Removes device from the list of auxiliary console devices. Specify device as the path name to the device or devices to be
removed from the auxiliary console device list.
-p Prints the list of auxiliary consoles that will be auxiliary across reboots.
When invoked with the -a or -d options , tells the application to make the change persist across reboot.
EXAMPLES
Example 1: Adding to the list of devices that will receive console messages
The following command adds /dev/term/a to the list of devices that will receive console messages.
example# consadm -a /dev/term/a
Example 2: Removing from the list of devices that will receive console messages
The following command removes /dev/term/a from the list of devices that will receive console messages. This includes removal from the per-
sistent list.
example# consadm -d -p /dev/term/a
Example 3: Printing the list of devices selected as auxiliary console devices
The following command prints the name or names of the device or devices currently selected as auxiliary console devices.
example# consadm
ENVIRONMENT VARIABLES
See environ(5) for descriptions of the following environment variables that affect the execution of consadm: LC_CTYPE, LC_MESSAGES, and
NLSPATH.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
|ATTRIBUTE TYPE |ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Stability Level |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), eeprom(1M), svcadm(1M), syslogd(1M), kadb(1M), environ(5), attributes(5), smf(5), sysmsg(7d), console(7d)NOTES
Auxiliary console devices are not usable for kadb or firmware I/O, do not receive panic messages, and do not receive output directed to
/dev/console.
The consadm service is managed by the service management facility, smf(5), under the service identifier:
svc:/system/consadm
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
SunOS 5.10 27 Oct 2004 consadm(1m)