T2000 Alom Upgrade Post: 302522638

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

escape from alom

No, its not a movie, its a command to get you from the sc> ALOM prompt back to the console or ok prompt. You must log into the ALOM, then to jump back to the console enter "console -f". Problem is that this leaves you logged in on the ALOM. Question: is there an escape key sequence to get...

2. Solaris

how to connect to alom

Hello Guys, I am working with sunfire V480 and wants to know how to connect to alom. Can you please guide?

3. Solaris

T2000 ALOM reset to OBP

Every time I would try to send a break to my T2000 I would get this Debugging requested; hardware watchdog suspended. c)ontinue, s)ync, r)eset? I couldn't get into OBP. Here's what I found to do... sc> bootmode Bootmode: normal sc> bootmode reset_nvram sc> bootmode...

4. Solaris

Difference b/n ALOM and ALOM CMT

Hi Everyone. What is the differece b/n ALOM and ALOM CMT Service processor. I am trying reset ALOM login/passwd using scadm utility on T2000, while I am googling I came cross ALOM CMT doesnt support scadm utility, but ALOM supports. Not sure how different are these. Thanks,

5. Solaris

Resetting ALOM

Hi gurus, I have a sun netra 240 server. I want to get to the ALOM but it always ask for login and password. Can anyone tell me how I can reset the ALOM it to default so I can be able to configure it? Thanks lots.

6. Solaris

ALOM - Console -

Hello forum, I have a SUN v250 at home that I have to practice Solaris. I currently have Solaris 9 installed and the ALOM Sun(tm) Advanced Lights Out Manager 1.5.2. From the ALOM I want to access the console. sc> console -f Enter #. to return to ALOM. after that there is no response....

7. Solaris

ALOM hang

Hi guys, I'm new with solaris. I just received sunfire T2000 server. Problem: ALOM keep hang/stuck/jammed. Steps do before it hang : 1. Connect to T2000 (using RJ45 - DB9 cable) 2. Open putty, connect via serial. 3. Power on the server. 4. Its loading. 5. then, hang. ...

8. Solaris

Alom

Hi, How to set ip address on eth0 for access ssh from ALOM? Is it possible? Now i cannot access it because don't have VGA. I keep try to access using ssh. Please guide me. Thanks.

9. Hardware

Alom ?

Hi all, I have some problems with the fan FT0.F0, which looks like has a problem with the PROM/ALOM ( I am nor sure who).....but, in fact, the fan is working properly even in other V440 Sparc Server. We checked HW comunication between Fan and the MotherBoard, and we think is a problem of...

LEARN ABOUT DEBIAN

sdl::gfx::imagefilter

pods::SDL::GFX::ImageFilter(3pm)			User Contributed Perl Documentation			  pods::SDL::GFX::ImageFilter(3pm)

NAME

       SDL::GFX::ImageFilter - image filtering functions

CATEGORY

       TODO, GFX

METHODS

   MMX_detect
       int gfx_image_MMX_detect()      CODE:	       SDL_imageFilterMMXdetect();

   MMX_off
       void gfx_image_MMX_off()      CODE:	     SDL_imageFilterMMXoff();

   MMX_on
       void gfx_image_MMX_on()	    CODE:	    SDL_imageFilterMMXon();

   add
       int gfx_image_add(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterAdd(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   mean
       int gfx_image_mean(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMean(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   sub
       int gfx_image_sub(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterSub(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   abs_diff
       int gfx_image_abs_diff(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterAbsDiff(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult
       int gfx_image_mult(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMult(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   mult_nor
       int gfx_image_mult_nor(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterMultNor(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult_div_by_2
       int gfx_image_mult_div_by_2(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby2(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   mult_div_by_4
       int gfx_image_mult_div_by_4(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby4(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   bit_and
       int gfx_image_bit_and(Src1, Src2, Dest, length)	    unsigned char *Src1      unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitAnd(Src1, Src2, Dest, length);	   OUTPUT:	     RETVAL

   bit_or
       int gfx_image_bit_or(Src1, Src2, Dest, length)	   unsigned char *Src1	    unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitOr(Src1, Src2, Dest, length);	  OUTPUT:	    RETVAL

   div
       int gfx_image_div(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterDiv(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   bit_negation
       int gfx_image_bit_negation(Src1, Dest, length)	   unsigned char *Src1	    unsigned char *Dest      int length      CODE:
		 RETVAL = SDL_imageFilterBitNegation(Src1, Dest, length);      OUTPUT:		 RETVAL

   add_byte
       int gfx_image_add_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterAddByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_uint
       int gfx_image_add_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterAddUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_byte_to_half
       int gfx_image_add_byte_to_half(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       C      CODE:	      RETVAL = SDL_imageFilterAddByteToHalf(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_byte
       int gfx_image_sub_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterSubByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_uint
       int gfx_image_sub_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterSubUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   shift_right
       int gfx_image_shift_right(Src1, Dest, length, N)      unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftRight(Src1, Dest, length, N);	    OUTPUT:	      RETVAL

   shift_right_uint
       int gfx_image_shift_right_uint(Src1, Dest, length, N)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       N      CODE:	      RETVAL = SDL_imageFilterShiftRightUint(Src1, Dest, length, N);	  OUTPUT:	    RETVAL

   mult_by_byte
       int gfx_image_mult_by_byte(Src1, Dest, length, C)      unsigned char *Src1      unsigned char *Dest	int length	unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterMultByByte(Src1, Dest, length, C);	    OUTPUT:	      RETVAL

   shift_right_and_mult_by_byte
       int gfx_image_shift_right_and_mult_by_byte(Src1, Dest, length, N, C)	 unsigned char *Src1	  unsigned char *Dest	   int length
	    unsigned char N	 unsigned char C      CODE:	      RETVAL = SDL_imageFilterShiftRightAndMultByByte(Src1, Dest, length, N, C);
	    OUTPUT:	      RETVAL

   shift_left_byte
       int gfx_image_shift_left_byte(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftByte(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left_uint
       int gfx_image_shift_left_uint(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftUint(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left
       int gfx_image_shift_left(Src1, Dest, length, N)	    unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeft(Src1, Dest, length, N);	   OUTPUT:	     RETVAL

   binarize_using_threshold
       int gfx_image_binarize_using_threshold(Src1, Dest, length, T)	  unsigned char *Src1	   unsigned char *Dest	    int length
	    unsigned char T	 CODE:		 RETVAL = SDL_imageFilterBinarizeUsingThreshold(Src1, Dest, length, T);      OUTPUT:
		 RETVAL

   clip_to_range
       int gfx_image_clip_to_range(Src1, Dest, length, Tmin, Tmax)	unsigned char *Src1	 unsigned char *Dest	  int length	  unsigned
       char Tmin      unsigned char Tmax      CODE:	      RETVAL = SDL_imageFilterClipToRange(Src1, Dest, length, Tmin, Tmax);	OUTPUT:
		 RETVAL

   normalize_linear
       int gfx_image_normalize_linear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax)      unsigned char *Src1	unsigned char *Dest	 int
       length	   int Cmin	 int Cmax      int Nmin      int Nmax	   CODE:	   RETVAL = SDL_imageFilterNormalizeLinear(Src1, Dest,
       length, Cmin, Cmax, Nmin, Nmax);      OUTPUT:	       RETVAL

   convolve_kernel_3x3_divide
       int gfx_image_convolve_kernel_3x3_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel3x3Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_divide
       int gfx_image_convolve_kernel_5x5_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel5x5Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_divide
       int gfx_image_convolve_kernel_7x7_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel7x7Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_divide
       int gfx_image_convolve_kernel_9x9_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel9x9Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_3x3_shift_right
       int gfx_image_convolve_kernel_3x3_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel3x3ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_shift_right
       int gfx_image_convolve_kernel_5x5_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel5x5ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_shift_right
       int gfx_image_convolve_kernel_7x7_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel7x7ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_shift_right
       int gfx_image_convolve_kernel_9x9_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel9x9ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   sobel_x
       int gfx_image_sobel_x(Src, Dest, rows, columns)	    unsigned char *Src	    unsigned char *Dest      int rows	   int columns	    CODE:
		 RETVAL = SDL_imageFilterSobelX(Src, Dest, rows, columns);	OUTPUT: 	  RETVAL

   sobel_x_shift_right
       int gfx_image_sobel_x_shift_right(Src, Dest, rows, columns, NRightShift)      unsigned char *Src      unsigned char *Dest      int rows
	    int columns      unsigned char NRightShift	    CODE:	    RETVAL = SDL_imageFilterSobelXShiftRight(Src, Dest, rows, columns,
       NRightShift);	  OUTPUT:	    RETVAL

   align_stack
       void gfx_image_align_stack()	 CODE:		 SDL_imageFilterAlignStack();

   restore_stack
       void gfx_image_restore_stack()	   CODE:	   SDL_imageFilterRestoreStack();

AUTHORS

       See "AUTHORS" in SDL.

perl v5.14.2							    2012-05-28					  pods::SDL::GFX::ImageFilter(3pm)