05-10-2011
First of all, you have but one interface. A packet can stay on the local machine or it can exit via eth0.
Since your netmask is 255.255.255.0, addresses like:
130.245.30.10
130.245.30.20
130.245.30.30
are on your local subnet. You can reach stuff like that directly. The packet goes out eth0 and the next hop is the destination. But you can't reach addresses that don't start out 130.245.30 directly. So you must send all other traffic to your default router which is 130.245.30.1. Your default router does start out with 130.245.30 so you can reach it directly. (You can also reach addresses which start out 169.254, which seems odd, but which has no bearing on this question. Is eth0 really right? Could there be a copying error? )
So whenever you want to reach anything that does not have an address starting with 130.245.30, just send it to the default router and let the router figure out what to do.
So the packet addressed to 130.245.1.44 will go out interface eth0 to the next hop which is 130.245.30.1.
Which entry in the routing table is used to forward this IP packet? Re-examine your answer to this question.
This User Gave Thanks to Perderabo For This Post:
10 More Discussions You Might Find Interesting
1. IP Networking
Giving netstat command on the prompt gives commands such as
localhost.43592 localhost.35237 32768 0 32768 0 TIME_WAIT
localhost.43594 localhost.43595 32768 0 32768 0 TIME_WAIT
localhost.43598 localhost.35237 32768 0 32768 0 TIME_WAIT... (6 Replies)
Discussion started by: DPAI
6 Replies
2. IP Networking
Why would I get TIME_WAIT when i netstat a port?? What would be some scenarios of this situation?? (1 Reply)
Discussion started by: eloquent99
1 Replies
3. UNIX for Dummies Questions & Answers
I'm sure this a simple networking question. I was performing a traceroute to a client of ours that connects to us over the internet. They were having problems connecting to us and I when I did the traceroute command it would stop at about 5 hops and give me 3 stars continously (* * *)
What does... (1 Reply)
Discussion started by: eloquent99
1 Replies
4. IP Networking
Hi
what is the command to see the process name/application name
along with the port number, connection status ...
netstat is not giving process/application name
Is there any way to know which application is holding which port?
Thanks in advance (3 Replies)
Discussion started by: axes
3 Replies
5. UNIX for Dummies Questions & Answers
Hello,
One of the solaris machine in our network is giving an error when the netstat command is executed.
soloman:/home/db2admin->netstat
ip open: Permission denied
can't open mib stream: Bad file number
But it works with root. I couldnt' get any useful info during my search in google.
... (2 Replies)
Discussion started by: k_pranava
2 Replies
6. BSD
For FreeBSD I use this command to determine what ports are listenning
netstat -an | grep LISTEN
is there another way, perhaps another command? (2 Replies)
Discussion started by: edgarvm
2 Replies
7. Solaris
Greetings to all,
Here is a line of output from my netstat command
cbp031.904 wdcprodhome.nfsd 98304 0 49640 0 ESTABLISHED
The only thing i recognize is the unix machine "cbp031" but what is .904 and all the other data telling me?
Thanks in advance. (3 Replies)
Discussion started by: Harleyrci
3 Replies
8. UNIX for Advanced & Expert Users
Hi,
I want to list the time for how long a secure connections last to my server/blade. i am using netstat command to get the same, but not sure how to get the time for how long connections is being ESTABLISHED.
netstat -na | grep 'ESTABLISHED' | grep :443 |awk '{print $4}' | cut -d: -f1 |... (1 Reply)
Discussion started by: Siddheshk
1 Replies
9. Red Hat
Hi
Can any body tell me about TIME_WAIT status meaning in the following command output.
# netstat -anp|grep 5000
tcp 0 0 127.0.0.1:50006 0.0.0.0:* LISTEN 5058/ccsd
tcp 0 0 0.0.0.0:50008 0.0.0.0:* ... (3 Replies)
Discussion started by: mastansaheb
3 Replies
10. OS X (Apple)
When running netstat -i from the Command Terminal,
It returns with 21 different connections..
The addresses all look like this:
::1
fe80:1::1
10:dd:b1:a5:c4:ba
with Network names like
Linke#2
fe80::8e2d
How can I delve deeper into this to clarify what is going on with my network?... (0 Replies)
Discussion started by: dwfiedler
0 Replies
LEARN ABOUT LINUX
debconf-mergetemplate
DEBCONF-MERGETEMPLATE(1) Debconf DEBCONF-MERGETEMPLATE(1)
NAME
debconf-mergetemplate - merge together multiple debconf template files
SYNOPSIS
debconf-mergetemplate [options] [templates.ll ...] templates
DESCRIPTION
Note: This utility is deprecated. You should switch to using po-debconf's po2debconf program.
This program is useful if you have multiple debconf templates files which you want to merge together into one big file. All the specified
files will be read in, merged, and output to standard output.
This can be especially useful if you are dealing with translated template files. In this case, you might have your main template file, plus
several other files provided by the translators. These files will have translated fields in them, and maybe the translators left in the
english versions of the fields they translated, for their reference.
So, you want to merge together all the translated templates files with your main templates file. Any fields that are unique to the
translated files need to be added in to the correct templates, but any fields they have in common should be superseded by the fields in the
main file (which might be more up-to-date).
This program handles that case properly, just list each of the translated templates files, and then your main templates file last.
OPTIONS
--outdated
Merge in even outdated translations. The default is to drop them with a warning message.
--drop-old-templates
If a translation has an entire template that is not in the master file (and thus is probably an old template), drop that entire
template.
SEE ALSO
debconf-getlang(1)
AUTHOR
Joey Hess <joeyh@debian.org>
2012-09-10 DEBCONF-MERGETEMPLATE(1)