Sponsored Content
Operating Systems HP-UX LV and/or physical drive problems HP9000 Post 302516868 by methyl on Monday 25th of April 2011 11:51:30 AM
Old 04-25-2011
The ioscan posted is incomplete. There is no detail after c0t10d0 (the 10th disc of 14 discs). You may find that one or more discs is shown as "NO_HW" instead of "CLAIMED".
There is no real evidence posted (so far) of a disc failure as such but it is clear that at power-on /etc/lvmtab did not match the physical discs for some reason.
This document may be useful for diagnosing the fault "When good disks go bad":
http://bizsupport2.austin.hp.com/bc/.../c01911837.pdf
Suggest you assemble an inventory of the hardware and LVM configuration along with the expected filesystem mount table and compare with your records. Record any commands you have typed which change things (e.g. "vgscan").
Then post the problem on the HP ITRC (LVM board).
This User Gave Thanks to methyl For This Post:
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

New Drive problems

Sun Ultra 80 ... had to connect an additional drive. connect it according to hardware manual The problem is when i try to power on the system , it dosent start, .. like the system is dead. :( So i remove the new drive and voila ... power starts up . Can anyone pinpoint wats goin on here. ... (7 Replies)
Discussion started by: DPAI
7 Replies

2. Linux

HP DAT Drive C1533A on RH9 Problems

HELP!! I am having some major problems at present with a HP dat drive under RH9. The drive worked fine previously under RH8, but now does not work. I am using kernel 2.4.20-30.9 on a i686 athlon intel box. My messages log shows the below: Apr 23 11:39:24 devsys kernel: ahc_pci:1:6:0:... (0 Replies)
Discussion started by: dkimber6
0 Replies

3. SuSE

SUSE 9 - problems accessing CD ROM drive

I've got SUSE 9 installed on a removable hard drive and the system is up and running fine. I'm trying to copy stuff off a CD onto one of my Linux partitions but I am getting an errors : * Could not read /media/cdrom/file1.tar.tar I can browse to the file location on the CD by using the... (11 Replies)
Discussion started by: GandalfWhite
11 Replies

4. UNIX for Advanced & Expert Users

tar problems using Sony AIT drive

Recently we brought up a Spectralogic 2K Tape Library that had been out of service for about 3 years to replace a DDS-4 tape drive unit as our main backup device. Everything seemed to go fine but now I have run into a little problem. System details: FBSD 6.1 SpectraLogic 2K library with a... (1 Reply)
Discussion started by: thumper
1 Replies

5. Solaris

Tape drive problems

Recently we had a problem with a CPU card on our SunFire V880 which has Solaris 9 OS. we removed the card and there was also a problem with our usr which was accidentally deleted. We able to restore the usr but now we having a problem with our tape drive. Previously we could write to the with ... (5 Replies)
Discussion started by: rahmantanko
5 Replies

6. UNIX for Dummies Questions & Answers

Problems with SCSI card and tape drive

Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
Discussion started by: RicardoM
2 Replies

7. SCO

Problems Detecting HP Tape Drive

I am trying to install an HP StorageWorks DAT40 Tape drive at SC0 5.0.7. The tape drive is not functional. When I run #sconf -v this is what I get; Sdsk ad160 0 0 0 0 Sdsk ad160 0 0 1 0 Stp ad160 0 0 3 0 But when... (2 Replies)
Discussion started by: RicardoM
2 Replies

8. AIX

Maximum Limit of HMC to handle Physical Power Virtualization Physical Machine

Hello All, Can anybody please tell me what is the maximum limit of Physical IBM Power Machine which can be handled by single HMC at a single point of time? Thanks, Jenish (1 Reply)
Discussion started by: jenish_shah
1 Replies

9. Fedora

Need to incrwase PHYSICAL VOLUME space on hard drive with free space on it

Hi, I run Fedora 17. I created a physical volume of 30GB on a disk with 60GB of space so there is 30GB of free space. On the physical volume, I created my volume group and logical volumes. I assigned all the space in the physical volume to my volume group. I need to add the 30GB of free space... (1 Reply)
Discussion started by: mojoman
1 Replies

10. AIX

AIX physical DVD/CD drive

Hello, I have some doubts about the dvd/cd physical on power machine and AIX. I see on my AIX lpar and see there is 1 DVD drive and its physical location bash-4.4# lsdev | grep cd0 cd0 Available 03-00-00 SATA DVD-RAM Drive bash-4.4# lscfg -vpl cd0 cd0 ... (12 Replies)
Discussion started by: Phat
12 Replies
interaggregate(6x)						XScreenSaver manual						interaggregate(6x)

NAME
interaggregate - Visualize the momentary and aggregate intersections between slowly moving circles. SYNOPSIS
interaggregate [-display host:display.screen] [-foreground color] [-background color] [-num-circles disc count] [-growth-delay delayms] [-max-cycles maxr] [-percent-orbits percent] [-base-orbits percent] [-base-on-center] [-draw-centers] [-fps] DESCRIPTION
The Intersection Aggregate is a fun visualization defining the relationships between objects with Casey Reas, William Ngan, and Robert Hod- gin. Commissioned for display at the Whitney Museum of American Art. A surface filled with 100 medium to small sized circles. Each circle has a different size and direction, but moves at the same slow rate. Display: A. The instantaneous intersections of the circles. B. The aggregate intersections of the circles. Ported to XScreensaver from the art project "InterAggregate" at http://www.complexification.net by J.Tarbell OPTIONS
interaggregate accepts the following options: -num-circles disc count (Default: 100) Number of slowly moving and growing discs to use. The more discs, the more CPU power. -growth-delay delayms (Default: 18000) Delay in ms between drawing cycles. More delay, slower (but smoother and less CPU intensive.) art. -fps Display the current frame rate and CPU load. ENVIRONMENT
DISPLAY to get the default host and display number. XENVIRONMENT to get the name of a resource file that overrides the global resources stored in the RESOURCE_MANAGER property. BUGS Setting the background to anything besides black confuses the intensity algorithm and will look terrible. SEE ALSO
X(1), xscreensaver(1) COPYRIGHT
Copyright (C) 2003 by J. Tarbell (complex@complexification.net, http://www.complexification.net). Ported to XScreensaver 2005 by David Agraz. AUTHOR
J. Tarbell <complex@complexification.net>, Jun-03 David Agraz <dagraz@mindspring.com>, Apr-05. X Version 11 5.15 (28-Sep-2011) interaggregate(6x)
All times are GMT -4. The time now is 09:32 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy