Difference between system console and ILOM . Post: 302515108

9 More Discussions You Might Find Interesting

1. AIX

Difference between tty and console devices ?

Hi, What is the diference between these two ? thanks Vilius

2. UNIX for Dummies Questions & Answers

remote system console

Hi, when I run the rsc comms the rsclogin, I type the loginname and the password, the rscpromt is coming, I type console and nothing is gone. What's wrong? Thanks

3. UNIX for Dummies Questions & Answers

Difference between console and ttys

Sometimes when I open up the terminal (like just now) it says Last login: Wed Jun 17 07:29:25 on console sometimes it says ttys (like when I exit and open a new window/tab). What's the difference? and is something fishy going on?

4. AIX

How to exit system console from HMC?

Hi, I ssh to HMC, then vtmenu, then start a system console from there. How do I exit the console to return to HMC prompt? I've tried the following two key combinations but none of them is working: (1) ~~ (2) Ctrl+[, Shift+( Thank you in advance!

5. UNIX for Dummies Questions & Answers

ILOM. What is the difference between ipaddress and pendingipaddress

Hi all, I would like to configure ILOM to be able to connect to NetMgt from the network. When i connected to LOM from console using #. i am getting -> prompt. then: cd /SP/network -> show /SP/network Targets: Properties: commitpending = (Cannot show property) ...

6. UNIX for Dummies Questions & Answers

Difference between console and Terminal.

I see these terms used all the time with hardly any distinction between the two. Any clarification would be appreciated!:) I could only get emacs to open in console so I was also wondering what are the common applications to use in console.:wall:

7. Solaris

How to start system console in ELOM?

Hi, The system is Sun x4150. I use putty ssh to access to it. I can't start system console: (hung) Any help will be greatly appreciated!

8. Solaris

Redirecting console output to ILOM during installation

Hi, I need to install solaris remotely via the ILOM port on a x4170 box, and I have downloaded the Solaris 11 for x86 - text install image and burned it on a DVD. When I boot the box, it's showing the boot_archive loading percentage on the SP console, but when it's done and start the interactive...

9. Solaris

How to start up console on Sun Fire X2200 ILOM using SSH?

Hi Oracle Hardware Specialists, I have shutdown a Sun Fire X2200 server running Solaris 10 x86 to single user mode to experiment some backup commands using Web based Sun embedded Lights Out Manager Redirection to open up a console session. However, it is not possible to copy & past text with...

LEARN ABOUT OSF1

scc

scc(7)							 Miscellaneous Information Manual						    scc(7)

NAME

       scc - Serial keyboard/mouse/communications interface

SYNOPSIS

       controller   scc0   at tc0   slot 3   vector sccintr

DESCRIPTION

       Two  base  board  Zilog scc dual UARTS provide DEC 3000 series personal systems with keyboard, mouse, and serial communications interfaces.
       The serial communications interfaces can operate at baud rates from B50 to B57600 (see tty(7)).

       The driver for the scc interface supports hardware flow control using the Request to Send (RTS) and Clear  to  Send  (CTS)  signals.   When
       hardware  flow  control is enabled, the flow of input data is controlled by the RTS signal and the flow of output data is controlled by the
       CTS signal.  If the CTS signal is off, the driver will suspend output to that line until the CTS lead is reasserted.  Likewise, the  driver
       will  turn off the RTS lead to tell the device connected to the line to stop sending data as a result of congestion on the host side.  When
       the condition clears, the driver will turn on the RTS lead to tell the device to resume sending data.

       In alternate console configurations (that is, no graphics head), communications port 2 (/dev/tty01) becomes the system console. The  serial
       system console port always operates at 9600 BPS, 8-bits, no parity.  No modem or hardware flow control is supported.

RESTRICTIONS

       Data  communications  equipment attached to the console serial port in alternate console configurations must be set to 9600 BPS, 8-bits, no
       parity. The scc driver enforces this restriction.

       Only communications port 1 (/dev/tty00) includes full modem control.

FILES

       console terminal local terminal local terminal

RELATED INFORMATION

       console(7), devio(7), modem(7), tty(7), MAKEDEV(8) delim off

																	    scc(7)