If i don't have raid disks can i shut down dmraid device-mapper? Post: 302513391

10 More Discussions You Might Find Interesting

1. Red Hat

IBM RAID disks

We have a Red Hat linux server running on IBM x445 hardware. There are external disks in an IBM EXP300 disk enclosure. The system is running RAID 5. One of the four IBM disks (73.4 GB 10k FRU 06P5760) has become faulty. The system is still up and running OK because of the RAID. In that same EXP300...

2. Solaris

Move disks to different StorEdge, keeping RAID

Hi. I need to move a 5 disk RAID5 array from a SE3310 box to a different SE3310 array. After installing the disks in the "new" StorEdge device, I "would like" ;) to be able have access to the data which is on the RAID. Essentially, the quesion is, how can this be done? :confused: I checked...

3. Red Hat

device-mapper-multipath path [undef]

I have an HP blade with Qlogic HBA's connected to an EVA8000. I have downloaded the latest multipath.conf from HP's website. The drive presented to the server appears to be configured and working except the output of "multipath -l" shows for all paths. What is causing this output? mpath0...

4. Red Hat

Device Mapper Notations and LVM

Hi, I had a doubt regarding device mapper notations and their corresponding LVM volumes. I have configured a volume group with two logical volumes in it as root and swap. The entries in the /etc/fstab file show the dm notations namely, /dev/mapper/VolGroup00-LogVol01...

5. Solaris

Solaris not recognizing RAID 5 disks

I've just installed Sol 10 Update 9 on a Sun 4140 server and have a RAID 1 configuration (2 136 Gb drives) for the OS and have created a RAID 5 array (6 136 GB) drives. When i log into the system I am unable to see the RAID 5 disks at all. I've tried using the devfsadm command but no luck and...

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

7. Red Hat

Device-mapper behaviour booting on init=bin/bash

Good morning Recently we needed to change the password from a redhat 6.5 system that no one knew the root password. Starting the system with the init=/bin/bash method took us to the following scenario: system_vg active with only root_lv and tmpfs mounted. our entries at fstab are like...

8. Solaris

Hardware RAID using three disks

Dear All , Pl find the below command , # raidctl -l Controller: 1 Volume:c1t0d0 Disk: 0.0.0 Disk: 0.1.0 Disk: 0.3.0 # raidctl -l c1t0d0 Volume Size Stripe Status Cache RAID Sub Size ...

9. UNIX for Advanced & Expert Users

Command to see the logical volume path, device mapper path and its corresponding dm device path

Currently I am using this laborious command lvdisplay | awk '/LV Path/ {p=$3} /LV Name/ {n=$3} /VG Name/ {v=$3} /Block device/ {d=$3; sub(".*:", "/dev/dm-", d); printf "%s\t%s\t%s\n", p, "/dev/mapper/"v"-"n, d}' Would like to know if there is any shorter method to get this mapping of...

10. Ubuntu

Md0 raid don't see my folders

I suddenly don't see my folders into /mnt/md0. What can be reason? mdadm --detail /dev/md* /dev/md0: Version : 1.2 Creation Time : Fri Jan 18 09:54:27 2019 Raid Level : raid1 Array Size : 1953383488 (1862.89 GiB 2000.26 GB) Used Dev Size : 1953383488 (1862.89 GiB...

LEARN ABOUT NETBSD

ataraid

ATARAID(4)						   BSD Kernel Interfaces Manual 						ATARAID(4)

NAME

     ataraid -- software BIOS RAID

SYNOPSIS

     pseudo-device ataraid
     ld* at ataraid? vendtype ? unit ?

DESCRIPTION

     The ataraid driver provides support for BIOS-based software RAID controllers.  These are devices which have some simple support for several
     basic RAID levels (often RAID 0 and RAID 1), but which require software support to actually perform the RAID function.  The BIOS support is
     largely just to create and recognize the array so that it may be a boot device.

     The driver currently supports RAID formats from:
	   o   Adaptec HostRAID (found in Intel 6300ESB)
	   o   Intel MatrixRAID
	   o   JMicron RAID
	   o   nVidia MediaShield
	   o   Promise FastTrak
	   o   Via V-RAID (found in many VIA-based motherboards)

     Status of the logical disk as well as the disks associated with it, can be viewed through the bioctl(8) utility.

SEE ALSO

     ld(4), bioctl(8)

HISTORY

     The ataraid driver first appeared in NetBSD 2.0.

AUTHORS

     The ataraid driver was originally adapted from FreeBSD by Jason Thorpe <thorpej@NetBSD.org>.

BUGS

     Not all features of the software RAID are currently recognized or supported.  For example, the Adaptec support doesn't recognize when a RAID
     1 should be in a ``building'' state, and it does not do the right thing.

     At least part of the reason for this is that the publically-available information on these formats is quite limited.

BSD
								September 16, 2008							       BSD

10 More Discussions You Might Find Interesting

1. Red Hat

IBM RAID disks

Discussion started by: pdudley

2. Solaris

Move disks to different StorEdge, keeping RAID

Discussion started by: alexs77

3. Red Hat

device-mapper-multipath path [undef]

Discussion started by: manzier

4. Red Hat

Device Mapper Notations and LVM

Discussion started by: kanna_geekworkz