As you told we tried for each..
it shows error like..
but
i got this info by viewing : linuxquestions.org - questions - linux-software-2/why-cant-i-mount-this-md0-raid-mdadm-and-software-raid-345232/ Why can't I mount this md0 raid? (mdadm and software raid)
My only Need is :: To get all data in "sdb" to be accessible
No problem if it comes in one directory or different directory.
Last edited by Scott; 03-28-2011 at 12:14 PM..
Reason: Use code tags, please...
Hi...
question is this:
How do I mount an LVD hotswap scsi drive in bay #2 on a netra using the mount command? volmgt doesn't seem to mount it and/or I don't know how to view the drives data if it's formatted which it may not be. This drive is not new out of the box so I'm not sure.
... (4 Replies)
Hi,
I set up a RAID 5 configuration and for some reason the volumes won't mount when the system boots. I have to manually mount them from the command line and all is fine.
Here's the vfstab entries:
#device device mount FS fsck mount mount
#to mount ... (2 Replies)
I am having trouble mounting with cifs, but mounting the exact same command with smbfs works fine. The share is on another samba server and is set to full public guest access. # mount -t cifs //servername/sharename /mnt/temp -o password=""
mount error 13 = Permission denied Refer to the... (3 Replies)
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
LEARN ABOUT SUSE
mkfs.btrfs
MKFS.BTRFS(8) System Manager's Manual MKFS.BTRFS(8)NAME
mkfs.btrfs - create an btrfs filesystem
SYNOPSIS
mkfs.btrfs [ -A alloc-start ] [ -b byte-count ] [ -d data-profile ] [ -l leafsize ] [ -L label ] [ -m metadata profile ] [ -n nodesize
] [ -s sectorsize ] [ -h ] [ -V ] device [ device ... ]
DESCRIPTION
mkfs.btrfs is used to create an btrfs filesystem (usually in a disk partition, or an array of disk partitions). device is the special file
corresponding to the device (e.g /dev/sdXX ). If multiple devices are specified, btrfs is created spanning across the specified
devices.
OPTIONS -A, --alloc-start offset
Specify the offset from the start of the device to start the btrfs filesystem. The default value is zero, or the start of the
device.
-b, --byte-count size
Specify the size of the resultant filesystem. If this option is not used, mkfs.btrfs uses all the available storage for the filesys-
tem.
-d, --data type
Specify how the data must be spanned across the devices specified. Valid values are raid0, raid1, raid10 or single.
-l, --leafsize size
Specify the leaf size, the least data item in which btrfs stores data. The default value is the page size.
-L, --label name
Specify a label for the filesystem.
-m, --metadata profile
Specify how metadata must be spanned across the devices specified. Valid values are raid0, raid1, raid10 or single.
-n, --nodesize size
Specify the nodesize. By default the value is set to the pagesize.
-s, --sectorsize size
Specify the sectorsize, the minimum block allocation.
-V, --version
Print the mkfs.btrfs version and exit.
AVAILABILITY
mkfs.btrfs is part of btrfs-progs. Btrfs is currently under heavy development, and not suitable for any uses other than benchmarking and
review. Please refer to the btrfs wiki http://btrfs.wiki.kernel.org for further details.
SEE ALSO btrfsck(8)MKFS.BTRFS(8)