|
|
Sponsored Content
Operating Systems
Linux
Red Hat
routing problem...im missing something
Post 302503157 by caddyjoe77 on Thursday 10th of March 2011 06:39:39 AM
03-10-2011
Hi Mark
the firewall is turned off. That was the first thing i did
i was looking at turning off the iptables as well. Looks like for a private network 192.168.0.0 there is an entry.
---------- Post updated 03-10-11 at 03:39 AM ---------- Previous update was 03-09-11 at 05:11 PM ----------
i am by no means a cisco dude. Found the problem. I didnt know that the switch was a layer 3 switch and also didnt realize that the vlans had a gateway setup. Input the gateway, and walaa...we are talking.
the firewall is turned off. That was the first thing i did
i was looking at turning off the iptables as well. Looks like for a private network 192.168.0.0 there is an entry.
---------- Post updated 03-10-11 at 03:39 AM ---------- Previous update was 03-09-11 at 05:11 PM ----------
i am by no means a cisco dude. Found the problem. I didnt know that the switch was a layer 3 switch and also didnt realize that the vlans had a gateway setup. Input the gateway, and walaa...we are talking.
|
|
10 More Discussions You Might Find Interesting
1. IP Networking
Hi
I know this problem is more likely some windows problem but it has also something to do with unix.
We have a windows nt environment wich uses AIX (unix) machines as file servers (samba). In our windows network environment we nicely see al the unix file servers via the 10 MB network. Last... (2 Replies)
Discussion started by: Mark Detrez
2 Replies
2. IP Networking
following Problem.
I configured my SuSE Linux 8.0 as a router. I4l, named, ip_forward, iptables (NAT/MASQUERADING) are running or are aktivatet.
I just can get a internet connection about the proxy server squid, but if i want to use other protocols i need functional routing.
(I had this... (1 Reply)
Discussion started by: razor
1 Replies
3. IP Networking
I have a question concerning networking. Could any forum
members explain to me why I might be getting "no route
to host" messages when I try to connect through ftp and
http protocols?
I have went to my etc/hosts file and everything seems to be
configured properly. I can connect within my... (1 Reply)
Discussion started by: cstovall
1 Replies
4. IP Networking
hi,
below is the situation:
my server is in 128.10.200.xxx network.
i have a solaris computer running in a subnet. this computer got 2 nic card.
1 is 172.18.198.xxx , another 1 is 10.100.xxx.11
there is a machine stick with this computer, ip is 10.100.xxx.12
so, 10.100.xxx.11 and... (3 Replies)
Discussion started by: kyhah
3 Replies
5. Solaris
Hi,
I got problem of Sun Solaris 8 routing.
IP of SunA is 10.16.64.164, and have routing table:
10.16.64.0 10.16.64.164 U 1 19236 bge1
10.6.0.0 10.6.0.3 U 1 16534 bge0
224.0.0.0 10.6.0.3 U 1 ... (4 Replies)
Discussion started by: milo
4 Replies
6. AIX
I need the following solution , please help me...
Current situation
ip: 192.168.0.12 persistent and 192.168.254.12 service ip
gateway: 192.168.0.254
subnet: 255.255.255.0
i have added a new ip on a new nic
ip: 10.10.255.40
gateway: 10.10.255.62
subnet: 255.255.255.224
... (1 Reply)
Discussion started by: rajibimran
1 Replies
7. IP Networking
Internet Gateway
192.168.0.201
Server 1
192.168.0.101
192.168.1.101
192.168.2.101
gateway: 192.168.0.201
VIP: 192.168.1.100
VIP: 192.168.2.100
Server 2
192.168.0.102
192.168.1.102
192.168.2.102
gateway: 192.168.0.201
Client 1
192.168.2.201
gateway: 192.168.2.100 (1 Reply)
Discussion started by: hopfensp
1 Replies
8. Solaris
Hi,
I have two physical interfaces on a servers.
We have connected them to differerent subnets.
1) First interface:
10.158.49.87 to newtwork 10.158.49.0, its gateway is 10.158.49.1
(It is added as default gateway)
It is existing set up. It works well
2) Second interface:
... (1 Reply)
Discussion started by: sri243
1 Replies
9. IP Networking
hi folks,
i have a horstbox-router with the following configuration.
it has 4 ethernet ports from wich one (wan0) is configured as an external modem via dhcp. at this port/interface(wan0) it is connected with my home network (other switch).
this configuration results in the following... (14 Replies)
Discussion started by: gencaslan
14 Replies
10. IP Networking
This is the network configuration I have:
+-------------------------------------------------+ +===========+
| | | |
| INTERNET |---| LINUXBOX2 |
... (4 Replies)
Discussion started by: matteo
4 Replies
LEARN ABOUT DEBIAN
aggregate-ios
AGGREGATE-IOS(1) General Commands Manual AGGREGATE-IOS(1) NAME
aggregate-ios - optimise a concatenated set of cisco/IOS prefix filters to help make them nice and short. SYNOPSIS
aggregate-ios <source_config >optimised_config DESCRIPTION
Takes cisco IOS configuration on stdin, and optimises any prefix filters found using aggregate(1). Optimised filters are produced on std- out. OPTIONS
None. DIAGNOSTICS
Any diagnostics produced by aggregate(1) are passed through on stderr. EXAMPLES
The following configuration fragment: ip prefix-list AS65530 description Foo, Inc ip prefix-list AS65530 permit 10.1.0.0/16 ip prefix-list AS65530 permit 10.2.0.0/16 ip prefix-list AS65530 permit 10.2.1.0/24 ip prefix-list AS65530 permit 10.3.0.0/16 ip prefix-list AS65531 description Bar.Com ip prefix-list AS65531 seq 5 permit 192.168.1.0/24 ip prefix-list AS65531 seq 10 permit 192.168.2.0/24 ip prefix-list AS65531 seq 15 permit 192.168.0.0/19 is optimised as follows: ip prefix-list AS65530 permit 10.1.0.0/16 le 24 ip prefix-list AS65530 permit 10.2.0.0/15 le 24 ip prefix-list AS65531 permit 192.168.0.0/19 le 24 SEE ALSO
aggregate(1) HISTORY
Aggregate-ios was written by Joe Abley <jabley@mfnx.net>. BUGS
All those in aggregate(1) and then some :) Joe Abley 2000 November 27 AGGREGATE-IOS(1)