Solaris not recognizing RAID 5 disks Post: 302501700

10 More Discussions You Might Find Interesting

1. Solaris

RAID in Solaris 9

All, Is there a way to RAID the disks in Solaris 9? Solaris 8 provided DiskSuite for mirroring disk drives. Is there a GUI for DiskSuite in Solaris 9? Thanks, Mike

2. Solaris

disks in solaris

whats the command to find name of all disks. Is it iostat -En ?

3. Red Hat

We have a Red Hat linux server running on IBM x445 hardware. There are external disks in an IBM EXP300 disk enclosure. The system is running RAID 5. One of the four IBM disks (73.4 GB 10k FRU 06P5760) has become faulty. The system is still up and running OK because of the RAID. In that same EXP300...

4. Solaris

Move disks to different StorEdge, keeping RAID

Hi. I need to move a 5 disk RAID5 array from a SE3310 box to a different SE3310 array. After installing the disks in the "new" StorEdge device, I "would like" ;) to be able have access to the data which is on the RAID. Essentially, the quesion is, how can this be done? :confused: I checked...

5. Linux

If i don't have raid disks can i shut down dmraid device-mapper?

hello my centOS newly installed system loading dmraid modules on startup I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there and he says: no raid disks found also I did modprobe -r dm_raid45 and it do remove it but only until...

6. Solaris

Solaris 9 not recognizing CDROM drive

Hello, I've read many posts that offer tips on how to mount a CDROM but I haven't seen any on how to get the system to recognize the CDROM drive. I was transferring files from CDROM to the hard drive successfully. I entered the third CDROM and the system refused to automount it. I tried...

7. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

8. Solaris

Solaris 10 Installation - Disks missing, and Raid

Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes. Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come...

9. Solaris

Hardware RAID using three disks

Dear All , Pl find the below command , # raidctl -l Controller: 1 Volume:c1t0d0 Disk: 0.0.0 Disk: 0.1.0 Disk: 0.3.0 # raidctl -l c1t0d0 Volume Size Stripe Status Cache RAID Sub Size ...

10. Solaris

Root user not recognizing on Solaris-10 (shadow file corruption)

Hello, I got into a wired state on one of solaris 10 server. When I noticed that server is having some issue, I found that there were dumpadm.conf entries in /etc/shadow and real entries were wiped of. Probably somebody fat fingers. I was able to boot into failsafe, break SVM mirror, copied...

LEARN ABOUT NETBSD

ataraid

ATARAID(4)						   BSD Kernel Interfaces Manual 						ATARAID(4)

NAME

     ataraid -- software BIOS RAID

SYNOPSIS

     pseudo-device ataraid
     ld* at ataraid? vendtype ? unit ?

DESCRIPTION

     The ataraid driver provides support for BIOS-based software RAID controllers.  These are devices which have some simple support for several
     basic RAID levels (often RAID 0 and RAID 1), but which require software support to actually perform the RAID function.  The BIOS support is
     largely just to create and recognize the array so that it may be a boot device.

     The driver currently supports RAID formats from:
	   o   Adaptec HostRAID (found in Intel 6300ESB)
	   o   Intel MatrixRAID
	   o   JMicron RAID
	   o   nVidia MediaShield
	   o   Promise FastTrak
	   o   Via V-RAID (found in many VIA-based motherboards)

     Status of the logical disk as well as the disks associated with it, can be viewed through the bioctl(8) utility.

SEE ALSO

     ld(4), bioctl(8)

HISTORY

     The ataraid driver first appeared in NetBSD 2.0.

AUTHORS

     The ataraid driver was originally adapted from FreeBSD by Jason Thorpe <thorpej@NetBSD.org>.

BUGS

     Not all features of the software RAID are currently recognized or supported.  For example, the Adaptec support doesn't recognize when a RAID
     1 should be in a ``building'' state, and it does not do the right thing.

     At least part of the reason for this is that the publically-available information on these formats is quite limited.

BSD
								September 16, 2008							       BSD

10 More Discussions You Might Find Interesting

1. Solaris

RAID in Solaris 9

Discussion started by: bubba112557

2. Solaris

disks in solaris

Discussion started by: vikashtulsiyan

3. Red Hat

IBM RAID disks

Discussion started by: pdudley

4. Solaris

Move disks to different StorEdge, keeping RAID

Discussion started by: alexs77