Assuming you're saying you connect directly to the P2000 via a FC HBA, is the HBA recognized by the OS?
As root, run:
That should show the HBA ports, assuming your HBA is recognized by the OS. If it's not reconized, find Solars x86 drivers for the HBA.
Once your HBA is recognized, you need to find out what LUNs the HBA can see. If you do have a supported HBA, then run this as root to see what LUNs the HBA can see:
All,
Is there a way to RAID the disks in Solaris 9? Solaris 8 provided DiskSuite for mirroring disk drives. Is there a GUI for DiskSuite in Solaris 9?
Thanks,
Mike (2 Replies)
if i want to create a raid 5 device on 3 disks I have, can I make multiple metadevices? all the example i see on the internet make use of the slice 2 placing the entire disk into the raid5 device.
what if i make 3 identical slices on each disk, and make 3 raid 5 metadevices? will that work? (1 Reply)
Hi there,
I was wondering if it is possible to include a RAID configuration in my Solaris 10 Jumpstart files, so that I don't have to manually set up RAID on all my machines.
Thanks
P.S. I started messing around with Solaris only a week back, so if I sound like a complete idiot, you know... (1 Reply)
Hi,
I tried to setup a Riad 0+1 but I found no step by step manual to follow so I tried on my own ;)
I'd already configured a mirror for the OS on my Solaris machines so I had an idea where to start. I have 9 drives in the server.
1. I configured the first two as a mirror for the OS.
2. I... (1 Reply)
hi all, will command metastats tell whether there is hardware layered raid ?
i intend to do patching and plug out one of the disks in case the one inside encountered issues. (1 Reply)
I've just installed Sol 10 Update 9 on a Sun 4140 server and have a RAID 1 configuration (2 136 Gb drives) for the OS and have created a RAID 5 array (6 136 GB) drives. When i log into the system I am unable to see the RAID 5 disks at all. I've tried using the devfsadm command but no luck and... (9 Replies)
Hello folks;
I'm trying to install Solaris 10 x86 on SUN X4150 box with 6 disks in it, the question is how can i create a Virtual disk like RAID 0 before i install Solaris.
When i boot up i don't see any option to go and create my raid before the installation begin.
Thanks in advance for any... (2 Replies)
We have hardware RAID configured on Sun-Blade-T6320 and one of the disk got failed. Hence we replaced the failed disk. But the hot swapped disk not recognized by RAID. Kindly help on fixing this issue.
We have 2 LDOM configured on this server and this server running on single disk.
#... (8 Replies)
Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes.
Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come... (2 Replies)
Discussion started by: msarro
2 Replies
LEARN ABOUT HPUX
hba_refreshadapterconfiguration
HBA_RefreshInformation(3HBAAPI) Common Fibre Channel HBA Information Library Functions HBA_RefreshInformation(3HBAAPI)NAME
HBA_RefreshInformation, HBA_RefreshAdapterConfiguration - refresh information for a specific HBA
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
void HBA_RefreshInformation(HBA_HANDLE handle);
void HBA_RefreshAdapterConfiguration(void);
PARAMETERS
handle an open handle returned from HBA_OpenAdapter(3HBAAPI)DESCRIPTION
The HBA_RefreshInformation() function requests that the underlying VSL reload all information about the given HBA. This function should be
called whenever any function returns HBA_STATUS_ERROR_STALE_DATA, or if an index that was previously valid returns HBA_STATUS_ERROR_ILLE-
GAL_INDEX. Because the underlying VSL can reset all indexes relating to the HBA, all old index values must be discarded by the caller.
The HBA_RefreshAdapterConfiguration() function updates information about the HBAs present on the system. This function does not change any
of the relationships between the HBA API and adapters that have not been reconfigured. HBA handles continue to refer to the same HBA even
if it is no longer installed. The HBA name or index assigned by the library remains assigned to the same HBA even if it has been removed
and reinstalled, as long as the bus position, WWN, and OS device have not changed. Adapter that have been removed and not replaced cannot
have their HBA handles, HBA names, and HBA indexes reassigned. Calls to these adapters will generate HBA_STATUS_ERROR_UNAVAILABLE.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API |
| |version 1) |
+-----------------------------+-----------------------------+
| |Standard: FC-HBA Version 4 |
| |(API version 2) |
+-----------------------------+-----------------------------+
|MT-Level |Safe |
+-----------------------------+-----------------------------+
SEE ALSO HBA_OpenAdapter(3HBAAPI), libhbaapi(3LIB), attributes(5)
T11 FC-MI Specification
SunOS 5.10 1 Sep 2003 HBA_RefreshInformation(3HBAAPI)