02-25-2011
thanks a lot
10 More Discussions You Might Find Interesting
1. Solaris
Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to... (5 Replies)
Discussion started by: xiaochensg
5 Replies
2. AIX
Hi All,
SUN emulex HBA card has been installed on P520 box.
When i run the cfgmgr i am getting the following message.
lpar2#cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.... (0 Replies)
Discussion started by: b_manu78
0 Replies
3. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
4. Solaris
I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install?
Thanks in advance.... (23 Replies)
Discussion started by: Y4Net
23 Replies
5. Solaris
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Discussion started by: girish.batra
6 Replies
6. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
7. Solaris
I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage.
in OK prompt, PROBE-SCSI-ALL
showing A5000 fc hdds details in ok prompt.....
but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000... (3 Replies)
Discussion started by: anysystem
3 Replies
8. Red Hat
Hi,
How to determine if HBA card in getting faulty from linux host ? any pointers. (2 Replies)
Discussion started by: saurabh84g
2 Replies
9. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
10. Solaris
Dear all,
I have a new Oracle Blade X4-2B server, running Solaris 10.
The server comes with a HBA card that will not be used now. It has not fibers connected to it. As a consequence, its leds never stop flashing.
My question is: how to disable this HBA card, without removing it physically... (2 Replies)
Discussion started by: Gus1971
2 Replies
LEARN ABOUT DEBIAN
roarvio
roarvio(7) System Manager's Manual: RoarAuido roarvio(7)
NAME
libroar - RoarAudio sound library
roarvio - RoarAudio virtual IO layer
SYNOPSIS
#include <roaraudio.h>
struct roar_vio_calls;
DESCRIPTION
The RoarAudio VIO interface is RoarAudio's IO abstraction layer. It provides basic IO functions such as read and write independing on the
underlaying IO. For Example can you open a plain or a gziped file via the VIO layer. After a successful open both objects behave the same,
libroar takes care about the compression in the gzip case.
TUTORIALS
Tutorials can be found in roartutvio(7).
IMPORTANT FUNCTIONS
There are several important functions. This is a small list of the most important ones.
Opening
roar_vio_open_file(3), roar_vio_open_fh(3), roar_vio_open_stdio(3), roar_vio_open_dstr(3), roar_vio_open_proto(3).
While there are a lot functions important for opening files the most important one is roar_vio_open_dstr(3). It opens a stream based
on URLs that can point to local files or files on remote machines. It also can handle compression and encryption.
Closing
roar_vio_close(3), roar_vio_shutdown(3)
Reading and writing
roar_vio_read(3), roar_vio_write(3)
Seeking and positioning
roar_vio_lseek(3)
Non-Blocking and Asyncron IO
roar_vio_nonblock(3), roar_vio_sync(3), roar_vio_select(3)
Networking and Sockets
roar_vio_accept(3)
String handling
roar_vio_printf(3)
BUGS
A lot...
SEE ALSO
roar-config(1), roartypes(1), roartutvio(7), RoarAudio(7).
RoarAudio May 2011 roarvio(7)