02-23-2011
what I meant with maximum distribution is a
chlv -e x logicalvolume - basically you make sure that the first physical partition goes onto disk1, the next one onto disk 2 ... if you have 10 disks, than the 11th physical partition goes again onto disk1 and the 12th onto disk2 ... in opposite to minimum distribution where the first x physical partitions go onto disk1 until its full and so on ...
Hope that clarifies it now a little more
Kind regards
zxmaus
10 More Discussions You Might Find Interesting
1. AIX
Hi, I was told that 300GB of LUN has been allocated to my server by the SAN group. apart from rootvg i have 2 volume groups(oracle) for which i need to add space as follows:
oradbvg 250GB to be added
oralvg 50GB
what are the steps that i should follow after iam being told that LUN has been... (4 Replies)
Discussion started by: karthikosu
4 Replies
2. UNIX for Advanced & Expert Users
Hello,
I have logical volume group of 50GB, in which I have 2 logical volumes, LogVol01 and LogVol02, both are of 10GB.
If I extend LogVol01 further by 10GB, then it keeps the extended copy after logical volume 2. I want to know where it keeps this information
Regards
Himanshu (3 Replies)
Discussion started by: ghimanshu
3 Replies
3. UNIX for Dummies Questions & Answers
I need to concatenate about a thousand files (using a loop) on a UNIX server. Also, each file has a header row which is to be removed. Which of the following would give better performance?
tail+2 <filename> or sed '1,1d' <filename>
Or is there another, faster way?
Thanks,
Kaus (4 Replies)
Discussion started by: kausmone
4 Replies
4. UNIX for Dummies Questions & Answers
Hi guys,
what is the relation between I/O performance and file systems.
I have a file systems called /dcs/data01 which is having 4Tb size.
According our application we can split the file system like
dcs/data01 -> 1Tb
dcs/data02 -> 1Tb
dcs/data03 -> 1Tb
dcs/data04 -> 1Tb
do you... (4 Replies)
Discussion started by: Davinzy
4 Replies
5. AIX
Hello,
I am a french computer technician, and i speak English just a little.
On Aix 5.3, I encounter a name conflict logical volume on two volume group.
The first volume lvnode01 is OK in rootvg and mounted. It is also consistent in the ODM
root # lsvg -l rootvg |grep lvnode01 ... (10 Replies)
Discussion started by: dantares
10 Replies
6. HP-UX
Hola a todos, me gustaría saber cómo chequear si estas LUN´s
objecthexuid .........................: 6005-08b4-0001-529c-0005-6000-45d6-0000
objecthexuid .........................: 6005-08b4-0001-529c-0005-6000-45d9-0000
objecthexuid .........................:... (1 Reply)
Discussion started by: aav1307
1 Replies
7. UNIX for Dummies Questions & Answers
Hi,
I am new to unix. I am working on Red Hat Linux and side by side on AIX also. After reading the concepts of Storage, I am now really confused regarding the terminologies
1)Physical Volume
2)Volume Group
3)Logical Volume
4)Physical Partition
Please help me to understand these concepts. (6 Replies)
Discussion started by: kashifsd17
6 Replies
8. UNIX for Dummies Questions & Answers
hi,
I want to create a volume group of 200 GB and then create different file systems on that.
please help me out. Its becomes confusing when the PP calculating PP.
I don't understand this concept. (2 Replies)
Discussion started by: kamaldev
2 Replies
9. Solaris
So,
We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup
FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Discussion started by: os2mac
4 Replies
10. Red Hat
Hello Guys,
I want to create a file system dedicated for an application installation. But there is no space in volume group to create a new logical volume. There is enough space in other logical volume which is being mounted on /var.
I know we can use that logical volume and create a virtual... (2 Replies)
Discussion started by: vamshigvk475
2 Replies
SD(4) Linux Programmer's Manual SD(4)
NAME
sd - driver for SCSI disk drives
SYNOPSIS
#include <linux/hdreg.h> /* for HDIO_GETGEO */
#include <linux/fs.h> /* for BLKGETSIZE and BLKRRPART */
CONFIGURATION
The block device name has the following form: sdlp, where l is a letter denoting the physical drive, and p is a number denoting the parti-
tion on that physical drive. Often, the partition number, p, will be left off when the device corresponds to the whole drive.
SCSI disks have a major device number of 8, and a minor device number of the form (16 * drive_number) + partition_number, where drive_num-
ber is the number of the physical drive in order of detection, and partition_number is as follows:
+3 partition 0 is the whole drive
partitions 1-4 are the DOS "primary" partitions
partitions 5-8 are the DOS "extended" (or "logical") partitions
For example, /dev/sda will have major 8, minor 0, and will refer to all of the first SCSI drive in the system; and /dev/sdb3 will have
major 8, minor 19, and will refer to the third DOS "primary" partition on the second SCSI drive in the system.
At this time, only block devices are provided. Raw devices have not yet been implemented.
DESCRIPTION
The following ioctls are provided:
HDIO_GETGEO
Returns the BIOS disk parameters in the following structure:
struct hd_geometry {
unsigned char heads;
unsigned char sectors;
unsigned short cylinders;
unsigned long start;
};
A pointer to this structure is passed as the ioctl(2) parameter.
The information returned in the parameter is the disk geometry of the drive as understood by DOS! This geometry is not the physical
geometry of the drive. It is used when constructing the drive's partition table, however, and is needed for convenient operation of
fdisk(1), efdisk(1), and lilo(1). If the geometry information is not available, zero will be returned for all of the parameters.
BLKGETSIZE
Returns the device size in sectors. The ioctl(2) parameter should be a pointer to a long.
BLKRRPART
Forces a reread of the SCSI disk partition tables. No parameter is needed.
The SCSI ioctl(2) operations are also supported. If the ioctl(2) parameter is required, and it is NULL, then ioctl(2) fails with
the error EINVAL.
FILES
/dev/sd[a-h]
the whole device
/dev/sd[a-h][0-8]
individual block partitions
COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the
latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Linux 2017-09-15 SD(4)