Sorry but this is not going to work as you have stated here. Once you have given the first line there is no reason to execute the second as it will only reload the saved rules and thus remove the rule you just added. The command to save the running rules is:
You need to save the running rules first so that you will have them when you reboot.
Yes, you are right. Thanks for the correction. I normally just edit /etc/sysconfig/iptables directly.
I've got a legit DHCP server on my network. I've got a 3550 as my VTP server providing 4 vlans to 4 2950 switches. If somebody were to plug into one of those vlans with a DHCP server configured then it would throw off my whole network. How could i block the DHCP server that could plug into the... (2 Replies)
Hi sir,
i want to make such programe which takes MAC(Ethernet) address of any host & give me its IP address.......
but i'm nt getting that how i can pass the MAC address to Frame........
Please give me an idea for making such program...
Thanks & regards
Krishna (3 Replies)
:) Firstly Hi all!!, im NEW!! and on here hoping that someone might be able to offer me some help... i have a server that keeps crashing every few days with the error message:
PANIC KERNAL-MODE ADDRESS FAULT ON USER ADDRESS 0X14
KERNAL PAGE FAULT FROM (CS:EIP)=(100:EF71B5BD)
EAX=EF822000... (10 Replies)
Hi Folks
I have been debugging a script that is called every thirty seconds. Basically it is doing a ps, well two actually, one to file (read by the getline below) and the other into a pipe. The one into the pipe is: -
V_SYSVPS=/usr/sysv/bin/ps
$V_SYSVPS -p$PIDLIST -o$PSARGS... (0 Replies)
Hi there
I lost connectivity to one of our remote systems and when I checked the messages log I found the following:
Aug 10 23:42:34 host xntpd: time reset (step) 1.681729 s
Aug 16 13:20:51 host ip: WARNING: node "mac address" is using our IP address x.x.x.x on aggr1
Aug 16 13:20:51 host... (9 Replies)
OS : solaris 10 X86
I created stream socket, tries to connect to port 7 on the remote machine.
After doing the non blocking connect call I did select with time out value is 3 secs. I am always getting timed out though I am writing prior to select.
code:
x=fcntl(S,F_GETFL,0);... (1 Reply)
I know how to add signal to a set. But what if I want to add 2 or 3 signals to the set.
I know I can use sigaddset (&set,SIGBUS)....but what if I want to add SIGBUS and SIGALRM at once. Do i have to do it like this..
sigaddset (&set,SIGBUS);
sigaddset (&set,SIGALRM);
Is there another way to... (0 Replies)
Hi
I am starting to practice nmap for my own education.
Now I created two host in virtual box.
Bot are scientific linux, one in installed as web server and the other as developing station.
I tried to run nmap on so I did nmap on their IP address, I got an answer that ip is down or that... (8 Replies)
among the below socket programming api's, please let me know which are blocking and non-blocking.
socket
accept
bind
listen
write
read
close (2 Replies)
Hi ,
Could someone let me know how to detect duplicate ip address after assigning ip address to ethernet interface using c program (3 Replies)
Discussion started by: Gopi Krishna P
3 Replies
LEARN ABOUT OSX
iptables-save
IPTABLES-SAVE(8) iptables 1.6.1 IPTABLES-SAVE(8)NAME
iptables-save -- dump iptables rules to stdout
ip6tables-save -- dump iptables rules to stdout
SYNOPSIS
iptables-save [-M modprobe] [-c] [-t table]
ip6tables-save [-M modprobe] [-c] [-t table]
DESCRIPTION
iptables-save and ip6tables-save are used to dump the contents of IP or IPv6 Table in easily parseable format to STDOUT. Use I/O-redirect-
ion provided by your shell to write to a file.
-M, --modprobe modprobe_program
Specify the path to the modprobe program. By default, iptables-save will inspect /proc/sys/kernel/modprobe to determine the exe-
cutable's path.
-c, --counters
include the current values of all packet and byte counters in the output
-t, --table tablename
restrict output to only one table. If not specified, output includes all available tables.
BUGS
None known as of iptables-1.2.1 release
AUTHORS
Harald Welte <laforge@gnumonks.org>
Rusty Russell <rusty@rustcorp.com.au>
Andras Kis-Szabo <kisza@sch.bme.hu> contributed ip6tables-save.
SEE ALSO iptables-apply(8),iptables-restore(8), iptables(8)
The iptables-HOWTO, which details more iptables usage, the NAT-HOWTO, which details NAT, and the netfilter-hacking-HOWTO which details the
internals.
iptables 1.6.1IPTABLES-SAVE(8)