Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to... (5 Replies)
Hi All,
SUN emulex HBA card has been installed on P520 box.
When i run the cfgmgr i am getting the following message.
lpar2#cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.... (0 Replies)
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install?
Thanks in advance.... (23 Replies)
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage.
in OK prompt, PROBE-SCSI-ALL
showing A5000 fc hdds details in ok prompt.....
but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000... (3 Replies)
Dear all,
I have a new Oracle Blade X4-2B server, running Solaris 10.
The server comes with a HBA card that will not be used now. It has not fibers connected to it. As a consequence, its leds never stop flashing.
My question is: how to disable this HBA card, without removing it physically... (2 Replies)
Discussion started by: Gus1971
2 Replies
LEARN ABOUT SUSE
fish
FISH(6) BSD Games Manual FISH(6)NAME
fish -- play ``Go Fish''
SYNOPSIS
fish [-p]
DESCRIPTION
fish is the game ``Go Fish'', a traditional children's card game.
The computer deals the player and itself seven cards, and places the rest of the deck face-down (figuratively). The object of the game is to
collect ``books'', or all of the members of a single rank. For example, collecting four 2's would give the player a ``book of 2's''.
The options are as follows:
-p Professional mode.
The computer makes a random decision as to who gets to start the game, and then the computer and player take turns asking each other for
cards of a specified rank. If the asked player has any cards of the requested rank, they give them up to the asking player. A player must
have at least one of the cards of the rank they request in their hand. When a player asks for a rank of which the other player has no cards,
the asker is told to ``Go Fish!''. Then, the asker draws a card from the non-dealt cards. If they draw the card they asked for, they con-
tinue their turn, asking for more ranks from the other player. Otherwise, the other player gets a turn.
When a player completes a book, either by getting cards from the other player or drawing from the deck, they set those cards aside and the
rank is no longer in play.
The game ends when either player no longer has any cards in their hand. The player with the most books wins.
fish provides instructions as to what input it accepts.
BUGS
The computer cheats only rarely.
BSD May 31, 1993 BSD