Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to... (5 Replies)
Hi All,
SUN emulex HBA card has been installed on P520 box.
When i run the cfgmgr i am getting the following message.
lpar2#cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.... (0 Replies)
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install?
Thanks in advance.... (23 Replies)
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage.
in OK prompt, PROBE-SCSI-ALL
showing A5000 fc hdds details in ok prompt.....
but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000... (3 Replies)
Dear all,
I have a new Oracle Blade X4-2B server, running Solaris 10.
The server comes with a HBA card that will not be used now. It has not fibers connected to it. As a consequence, its leds never stop flashing.
My question is: how to disable this HBA card, without removing it physically... (2 Replies)
Discussion started by: Gus1971
2 Replies
LEARN ABOUT REDHAT
capiinit
capiinit(8) System Manager's Manual capiinit(8)NAME
capiinit - start or stop CAPI-capable ISDN cards
SYNOPSIS
capiinit [OPTIONS] start | stop | show | status | prepare | reload | activate | deactivate
capiinit [OPTIONS] activate|deactivate cardname
capiinit [OPTIONS] activate|deactivate driver [cardname]
DESCRIPTION
capiinit is called with one of the following actions:
start Load all modules and initialize all cards (loading the firmware), which are configured in /etc/capi.conf.
stop Reset all cards and unload modules.
show Show the current configuration.
status Show the current status.
prepare
Load all modules.
activate
Initialize all cards.
activate cardname
Initialize one card (i.e.: c4-ec00).
activate driver [cardnumber]
Initialize one card.
deactivate
Reset all cards.
deactivate cardname
Reset one card (i.e.: c4-ec00).
deactivate driver [cardnumber]
Reset one card.
reload Reset all cards and initialize them again.
Firmware files are searched in this order in the following directories: /usr/share/isdn/`uname -r`, /usr/share/isdn, /usr/lib/isdn,
/lib/isdn.
There is a sample config in /etc/capi.conf.
OPTIONS -c filename, --config filename
Use filename as config file (default is /etc/capi.conf).
-d, --debug
Save patch values for debugging purposes.
-s, --silent
Don't show status information.
AUTHOR
Manpage written from C source by Paul Slootman <paul@debian.org>, updated by Matthias Klose <m@klose.in-berlin.de>.
capiinit(8)