Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to... (5 Replies)
Hi All,
SUN emulex HBA card has been installed on P520 box.
When i run the cfgmgr i am getting the following message.
lpar2#cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.... (0 Replies)
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install?
Thanks in advance.... (23 Replies)
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage.
in OK prompt, PROBE-SCSI-ALL
showing A5000 fc hdds details in ok prompt.....
but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000... (3 Replies)
Dear all,
I have a new Oracle Blade X4-2B server, running Solaris 10.
The server comes with a HBA card that will not be used now. It has not fibers connected to it. As a consequence, its leds never stop flashing.
My question is: how to disable this HBA card, without removing it physically... (2 Replies)
Discussion started by: Gus1971
2 Replies
LEARN ABOUT DEBIAN
ql-hba-snapshot
ql-hba-snapshot(8) System Administration ql-hba-snapshot(8)NAME
ql-hba-snapshot - display specific information of the QLogic HBA.
SYNOPSIS
ql-hba-snapshot <Host number> [OPTIONS]
DESCRIPTION
FC HBA Snapshot Utility
This utility displays the details of the QLogic HBA attached to the system. It uses one of the two file systems for scanning: proc or
sysfs.
<Host number> | <-a/--all> [optional]
Provide the <HOST NUMBER> to display the detailed information of the HBA. With no option specified, general information of all
hosts will be displayed. Ex. # /usr/sbin/ql-hba-snapshot <Host Number> # /usr/sbin/ql-hba-snapshot --procfs <Host Number> (For
procfs)
-h, --help
Prints the help message. Ex. # /usr/sbin/ql-hba-snapshot --help
-hl, --hostlist
This option displays the list of QLogic hosts (HBAs) connected to this system. The <HOST NUMBER> can be obtained by using following
command Ex. # /usr/sbin/ql-hba-snapshot --hostlist
-p, --parameters
This option displays the command line parameters that can be passed to the QLogic HBA driver. Ex. # /usr/sbin/ql-hba-snapshot
--parameters <Host Number>
-s, --statistics
This option displays the statistical information for specified host. Stastics option is only supported in "sysfs" based scan. Ex.
# /usr/sbin/ql-hba-snapshot --statistics <Host number/--all>
-proc, --procfs
This options forces the the utility to scans information based on "procfs", instead of default sysfs. Ex. # /usr/sbin/ql-hba-snap-
shot --procfs [Other valid option]
-v, --verbose
This enables verbose display. The detailed information of LUNs will be displayed in addition to standard one. This option is only
supported in sysfs. Ex. # /usr/sbin/ql-hba-snapshot --verbose <Host number/-a>
SEE ALSO ql-dynamic-tgt-lun-disc(8), ql-lun-state-online(8), ql-set-cmd-timeout(8)Matthias Schmitz <matthias@sigxcpu.org> July 2009 ql-hba-snapshot(8)