I want to merge data from 2nd file to 1st file based on 1st column
File1 is suppose to have 3 columns( one or more could be empty)
I don't want to merge rows with same column 1 to be merged in the same line( in case of data1 in the example )
Hi Guys,
I wonder whether is possible to merge two files using awk. I have two files one with 7 columns and another one with 9 columns and the first column on both files is identical so will be my key to merge the files. Any ideas.Thanks in advance.
Harby. (2 Replies)
hi,
i am facing a problem in merging two files using awk,
the problem is as stated below,
file1:
A|B|C|D|E|F|G|H|I|1
M|N|O|P|Q|R|S|T|U|2
AA|BB|CC|DD|EE|FF|GG|HH|II|1
....
....
....
file2 :
1|Mn|op|qr (2 Replies)
Hi, guys. I have one question:
I have two files: passwd and shadow (the number of records in these files are not equal)the contents of them are below:
passwd:
**************
ftp:x:24:24:
sshd:x:71:65:
uucp:x:10:14:
brownj:x:5005:1000:
sherrys: x :5006:1000:
...
*************
... (2 Replies)
Hello,
I'm new to awk. I've 2 files where H stands for header and T for trailer. The number following T gives the record count in a file.
file 1 looks like this:
H|A|B|C
1|2|3
1|2|4
2|3|5
T|3
file 2 looks like this:
H|A|B|C
4|5|6
7|8|9
T|2
Need to merge the above 2 files such... (2 Replies)
I have 2 files pipe delimted and want to merge them based on a key
e.g file 1
123$aaa$yyy$zzz
345$xab$yzy$zyz
456$sss$ttt$foo
799$aaa$ggg$dee
file 2
123$hhh
345$ddd
456$xxx
888$zzz
so if the key is the first field, and the result should be the common key between file 1 and 2 (6 Replies)
I have two file like follows. I want to merge them according the first field of file1. The separator of file1 is tab, while the second one is ",". I tried some code, but can't get the results.
File1:
AABB 6072 28 5922
BBCC 316 147 162
CCDD 907 71 231
File2:
CCDD,hTRBV12-4,hTRBJ2-3,319895... (7 Replies)
Dear Awk experts!
I have been trying to get a one liner for a match and merge operation, but having difficulties as I'm an awk newb. I always get stuck on the match and merge with 2 files.
I have 2 files as follows:
File 1:
field 1,field 2,field 3,field 4,field 5,field 6,field 7,field... (6 Replies)
Hi,
i have two files like these:
FILE 1
00:0f:35:1b:0c:00 1402691094.750049000 00:0f:35:1b:0c:00 1402691087.474893000
44:d3:ca:fd:a2:08 1402691091.865127000
30:e4:db:c1:df:de 1402691090.192464000
FILE 2_
00:0F:35 Cisco Systems, Inc
30:E4:DB Cisco Systems, Inc
I need a file 3, that... (5 Replies)
I have two csv files : say a.csv, b.csv
a.csv looks like this :
property1,property2,100
property3,property4,200
In a.csv, the combination of column1 and column2 will be unique
b.csv looks like this
property1,property2, 300, t1
property1,property2, 400,t2
property3, property4,800,t1... (2 Replies)
Discussion started by: Lakshmikumari
2 Replies
LEARN ABOUT DEBIAN
openipmicmd
openipmicmd(1) An IPMI Command Interface openipmicmd(1)NAME
openipmicmd - An IPMI Command Interface
SYNOPSIS
openipmicmd [-k entry-to-execute] <connection parms>
DESCRIPTION
The openipmicmd program allows a user to execute direct IPMI commands. It can work with direct interface with the OpenIPMI driver or with
IPMI LAN interfaces.
OPTIONS -k entry-to-execute
Execute a single command an exit.
<connectionparms>
The parameters for the connection depend on the connection type. These are all described in openipmi_conparms (7)
COMMANDS
Once up, you can execute commands in the user interface. Note that commands and responses are asynchronous, you issue a command and the
interface returns immediately. When the response comes back, it will be dumped on your console. That's a little strange looking, but IPMI
is ansychronous underneath. Note that the -k option is synchronous, it will wait for the response or a timeout before returning.
0f lun netfn cmd [data1 [data2 ...]]
Send a command to the BMC you are connected to.
channel [ipmb] IPMB-addr lun netfn [seq] cmd [data1 [data2 ...]]
Send a command to a device on the IPMB bus. The "ipmb" string is optional. The seq must be provided if the netfn is a response (an
odd number). It must be the same sequence number that came in on the command in the "Command Sequence = seq" part of the command.
channel 00 IPMB-addr lun netfn cmd [data1 [data2 ...]]
Send a broadcast command to a device on the IPMB bus.
channel lan handle remote-swid local-swid lun netfn cmd [data1 [data ...]]
Send a command to a device over a LAN channel. Note that this not the same as a LAN connection. This sends a message through a
local BMC to a remote system that is hooked up with a LAN connection.
test_lat count command
Executes the given commands (one of the previous commands) count times and gives the average time per command to execute. Note that
"count" is hexadecimal.
help Display some help.
regcmd netfn cmd
Register to receive the given command. If the driver receives an external command, it will print it out. This only works with sys-
tem interface connections, it will not work on LAN connections.
unregcmd netfn cmd
Remove a command registration.
SEE ALSO ipmi_ui(1), ipmilan(8), openipmi_conparms(7)KNOWN PROBLEMS
The asychronous nature of the program can be annoying.
AUTHOR
Corey Minyard <cminyard@mvista.org>
OpenIPMI 05/13/03 openipmicmd(1)