So as an AIX lover, you want to create a mksysb image on a NIM server ready to deploy a new client?
I think that Jumpstart is the Solaris term for it. I used to do it, but it's been 10 years and I've forgotten. I think we used to use ufsbackup to tape and then restore, because it was in the days before 100M ethernet even. A quick search of these sorts of terms turned up BigAdmin Feature Article: Using Solaris JumpStart With the Solaris 10 OS for x86/x64 Platforms if that's useful.
An alternate might be (if you have an identical server up and running) with a spare bootable disk (assuming it is c0t0d0 source to c0t1d0 on the target)
You would need to set up remote shell on the receving target server before you run this. If all goes well, you should be able to then:-
mount /dev/dsk/c0t1d0s0 /mnt
vi /etc/hosts <---- set new network here!
Set the boot flags, with an eeprom command I think (c'mon, it's been 10 years already!)
init 6 to boot from the new disk. Probably as well to pull the network cables before this point and log on at the console, just to be sure.
ifconfig -a (or whatever) and check the addresses carefully
Take care with this. You could easily upset the current live server or perhaps overwrite the wrong target disk. High caution is advised!
Because of the risk, no guarantees are included with this post and no acceptance of liability will be accepted for losses to services or consequentially losses to any parties dependant on them.
Apart from that, I hope that this is helpful pointer.
Hai ......... my name Rio,
I want to clone my harddisk at Sun Balade 2000 server with Solaris 8 OS, my question is :
a. what kind method for making backup or clonning disk ?
b. what method more easier , quick but still reliable ?
c. how to proceed it ?
Thanks (1 Reply)
All,
After a power loss I went to power on our sun fire v120 that is running solaris 10 and now it will not boot. I tried power cycling it from the lom and pulling the cord but nothing works. All it does is after a power cycle it will start to boot and then start to spit out a bunch of hex... (2 Replies)
if anyone can help me here I will be in debt eternaly. I'm in a spot here fearing for my job.
I tried to install a new scsi array on our E5500. I powered it down correctly, removed the terminator, connected the array and powered it on. It was taking so long to come up I freaked out and powered... (3 Replies)
Hi All,
My company has three V120 servers and two V245 servers. Currently we access ALOM on v245 thru NET MGT port. There are no NET MGT on V120. We use to access A/LOM on the V120s thru Windows Hyper Terminal connected to the Serial A port of v120. Since all of our Windows boxed are... (6 Replies)
I have come into my possesion a v120 server at work that was decommisioned from another project. I don't have the Solaris Installation CD nor do I have root or any user credentials on this server. My goal was to install OpenSolaris on this server and use it as a playground for learning UNIX... (6 Replies)
Hi,
I recently acquired an old Sun Fire v120 from work. I plan to play around with this at home whilst I'm studying for my SCSA exams. Only problem is it currently has no memory installed. I believe the memory modules required are 168 pin PC133 DIMMs. Unfortunately, the original Sun modules are... (3 Replies)
Hi mates,
well before posting my problem, i really searched hi and low for some ideas, but sad to say none of them worked, including dd command.
My problem is that i have 2 harddisk, 1 in use and 1 for spare. The one im using got crashed and now im using my spare harddisk with all the... (24 Replies)
Hi,
How to know which server(Application or webserver) the production link or url is pointing to? Is there any command to get the server IP address?
Thanks in advance. (3 Replies)
Hi!
I am quite new to Solaris and come from AIX world.
I need to clone running production LDOM. In AIX you just take mksysb and restore it to new LPAR. It will install with blank network settings.
How to do it in Solaris 11? Can't find document to clone from running system.. they talk only... (6 Replies)
Discussion started by: padapada
6 Replies
LEARN ABOUT LINUX
dhcpmgr
dhcpmgr(1M) System Administration Commands dhcpmgr(1M)NAME
dhcpmgr - graphical interface for managing DHCP service
SYNOPSIS
/usr/sadm/admin/bin/dhcpmgr
DESCRIPTION
dhcpmgr is a graphical user interface which enables you to manage the Dynamic Host Configuration Protocol (DHCP) service on the local sys-
tem. It performs the functions of the dhcpconfig, dhtadm, and pntadm command line utilities. You must be root to use dhcpmgr. The dhcpmgr
Help, available from the Help menu, contains detailed information about using the tool.
USAGE
You can perform the following tasks using dhcpmgr:
Configure DHCP service
Use dhcpmgr to configure the DHCP daemon as a DHCP server, and select the data store to use for storing network configuration tables..
Configure BOOTP relay service
Use dhcpmgr to configure the DHCP daemon as a BOOTP relay.
Manage DHCP or BOOTP relay service
Use dhcpmgr to start, stop, enable, disable or unconfigure the DHCP service or BOOTP relay service, or change DHCP server parameters.
Manage DHCP addresses
Use dhcpmgr to add, modify, or delete IP addresses leased by the DHCP service.
Manage DHCP macros
Use dhcpmgr to add, modify or delete macros used to supply configuration parameters to DHCP clients.
Manage DHCP options
Use dhcpmgr to add, modify or delete options used to define parameters deliverable through DHCP.
Convert to a new DHCP data store
Use dhcpmgr to configure the DHCP server to use a different data store, and convert the DHCP data to the format used by the new data
store.
Move DHCP data to another server
Use dhcpmgr to export data from one Solaris DHCP server and import data onto another Solaris DHCP server.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
non-zero An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWdhcm |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO dhcpconfig(1M), dhtadm(1M), pntadm(1M), in.dhcpd(1M), dhcpsvc.conf(4), dhcp_network(4), dhcptab(4), attributes(5), dhcp(5), dhcp_modules(5)
Solaris DHCP Service Developer's Guide
System Administration Guide: IP Services
SunOS 5.10 13 Mar 2001 dhcpmgr(1M)