How to connect a 4TB G-Raid hard drive to a laptop? Post: 302496405

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the...

2. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

3. UNIX for Dummies Questions & Answers

How to connect laptop to Unix system via Parallel port

Hi, I have been using a computer to keep track of inventory for my business. I am pretty sure it runs on Unix. In the back of the computer there is some sort of PCI card that has about 8 RJ-11 ports on it. I use that card to connect the Unix system to my 3 VT-220 terminals. I use a simple 6...

4. Slackware

installing slackware 10.2 on compaq laptop with Sansung HM121HI hard drive

Hi Guys, I'm trying to install slackware 10.2 on a on compaq laptop with Sansung HM121HI hard drive but I wonder what kernel should I use so it can recognize the had disk. Initially I've tried using sata.i and then try to use the fdisk utility to create the new partiotions but doesn't seem...

5. Solaris

Connect an External SCSI Hard Drive to Ultra 80

Guys, I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem. I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80. I connected it powered it up and at OK prompt did : boot -r system comes up and complains about not...

6. UNIX for Dummies Questions & Answers

RAID Drive

Hello, I have a machine that has software based RAID. One of the hard drives failed. The problem is that the old systems administrator created LVM and then RAID. My understanding is that RAID had to be created before and then the LVM's. Is there someway to install the new drive without loosing...

7. Ubuntu

Connect 2 laptops with RJ45 cable (Ubuntu 10.10 laptop with Windows 7 laptop)

Hi to all, I have the problem that a laptops with windows XP cannot startup even in safe mode nor using last good known configuration. I have a Ubuntu 10.10 Live CD and booting from it I can read the Hard Drive. I need to do a backup the Hard Drive from XP laptop and I want to connect this...

8. Solaris

Connect from Dell Laptop to SunBlade 100

Hi All I connect to my SunBlade using the keyboard/mouse provided by the sun. Now I would like to connect to it using my dell laptop running on Windows 7. I have connected the laptop to the SunBlade using just a one crossover 9-pin connector using the free/basic version of the terminal...

9. AIX

RAID 10 Failed Drive Swap

I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can...

LEARN ABOUT REDHAT

ammt

AMMT(8) 						      System Manager's Manual							   AMMT(8)

NAME

       ammt - Amanda version of mt

SYNOPSIS

       ammt [ -d ] [ -f|-t device ] command [ count ]

DESCRIPTION

       Ammt  provides just enough of the standard mt command for the needs of Amanda.  This is handy when doing a full restore and the standard mt
       program has not yet been found.

       Ammt also provides access to the Amanda output drivers that support various tape simulations.

       See the amanda(8) man page for more details about Amanda.  See the OUTPUT DRIVERS section of amanda(8) for more information on  the  Amanda
       output drivers.

OPTIONS

       -d     Turn on debugging output.

       -f device
	      Access tape device device.  If not specified, the TAPE environment variable is used.

       -t device
	      Same as -f.

       command count
	      Which command to issue, and an optional count of operations.

COMMANDS

       Each command may be abbreviated to whatever length makes it unique.

       eof|weof count
	      Write count (default: 1) end of file marks (tapemarks).

       fsf count
	      Skip forward count (default: 1) files.

       bsf count
	      Skip backward count (default: 1) files.

       asf count
	      Position to file number count (default: 0) where zero is beginning of tape.  This is the same as a rewind followed by a fsf count.

       rewind Rewind to beginning of tape.

       offline|rewoffl
	      Rewind to beginning of tape and unload the tape from the drive.

       status Report  status information about the drive.  Which data reported, and what it means, depends on the underlying operating system, and
	      may include:

	      ONLINE Indicates the drive is online and ready.

	      OFFLINE
		     Indicates the drive is offline or not ready.

	      BOT    Indicates the drive is at beginning of tape.

	      EOT    Indicates the drive is at end of tape.

	      PROTECTED
		     Indicates the tape is write protected.

	      ds     Device status.

	      er     Error register.

	      fileno Current tape file number.

	      blkno  Current tape block number file.

	      NOTE: many systems only report good data when a tape is in the drive and ready.

AUTHOR

       Marc Mengel <mengel@fnal.gov>
       John R. Jackson <jrj@purdue.edu>

SEE ALSO

       amanda(8)

																	   AMMT(8)