Hello there,
I wrote a shell script to modify the code for some of our clients in our client database. Before starting the data modification the program performs a few checks.
When a check is being performed, it should be shown on the screen of the user running the program, the result of... (5 Replies)
We have 6 hard disks attached to the hardware. Of this 2 hard disks are of 9 GB each.
Now I want combine both the same in such a way that i see a combined entry in the output of df -k .
The steps I follow are
1. Create partition on hard disks (Using format partition)
2. Run newfs -v for... (6 Replies)
I would like to extend a logical drive on our 3510. I have four unallocated disks which I would like to use for this purpose.
The 3510 supports a Sun Cluster but for now all I wish to see is a "new" disk when I run format.
I am a little familiar with the telnet/ssh session on the 3510 but am... (2 Replies)
Hi;
I have 4 new disks in a 6120 Array attached to a SUN server running zfs.
There are already two virtual disks on the array comprising of 3 disk raid 5 for each Vdisk.
I need to add two more disks to each vdisk making each a 5 disk raid 5 Vdisk.
If ZFS already has the original... (3 Replies)
Hi, I'm using normally ls -l to get the content of a directoy.
But, it's possible to enumerate the ls output ? (like put the line number at the begining of each line)
If it wasn't possible (I don't hope so ...), there's a way to get the line number the line had after doing a grep:
ls -l... (8 Replies)
Hi
I would like to place in one line output from two functions. Both functions return text with print cmd.
When I place above code in script it will place them in series.
e.g.
1 #/bin/ksh
2
3 function1()
4 {
5 print "My name is"
6 ... (3 Replies)
Hi Guys,
I've been having some arguments with my colleagues about one thing. Always my thought was that as as far as disk performance is concern by looking at the output of the iostat command (AIX) you would be able to identify if you have a hot disk and then by moving some files out that disk... (3 Replies)
Hi,
I am trying to place the contents of a .CSV file to an array, but not sure how to do that.
Here is my .CSV file content:
App,SLA,Job name,Avg start time,Avg run time,Frequency,Downstream apps
XYZ,,ABC14345,3:00 AM,00.04.00,Daily,STAMP
XYZ,9:00,ABC12345,3:15 AM,00.05.00,Daily,STAMP
... (4 Replies)
anyone have any idea how do to this with auth_attr?
I suspect if I grant him
solaris.device.:RO::Device Allocation::help=DevAllocHeader.html
that will work but I'm unsure. Just looking for a second opinion. (10 Replies)
Discussion started by: os2mac
10 Replies
LEARN ABOUT DEBIAN
printok
MESSAGES(3) libbash messages Library Manual MESSAGES(3)NAME
messages -- libbash library that implements a set of functions to print standard status messages
SYNOPSIS
printOK [indent]
printFAIL [indent]
printNA [indent]
printATTN [indent]
printWAIT [indent]
DESCRIPTION
General
messages is a collection of functions to print standard status messages - those [ OK ] and [FAIL] messages you see during Linux boot process.
The function list:
printOK Prints a standard [ OK ] message (green)
printFAIL Prints a standard [FAIL] message (red)
printNA Prints a standard [ N/A] message (yellow)
printATTN Prints a standard [ATTN] message (yellow)
printWAIT Prints a standard [WAIT] message (yellow)
Detailed interface description follows.
indent
Column to move to before printing.
Default indent is calculated as TTY_WIDTH-10. If current tty width can not be determined (for example, in case of serial console), it
defaults to 80, so default indent is 80-10=10
FUNCTIONS DESCRIPTIONS
printOK [indent]
Prints a standard [ OK ] message (green)
printFAIL [indent]
Prints a standard [FAIL] message (red)
printNA [indent]
Prints a standard [ N/A] message (yellow)
printATTN [indent]
Prints a standard [ATTN] message (yellow)
printWAIT [indent]
Prints a standard [WAIT] message (yellow)
EXAMPLES
Run a program named MyProg, and report it's success or failure:
echo -n 'Running MyProg...'
printWAIT
if MyProg ; then
printOK
else
printFAIL
fi
AUTHORS
Hai Zaar <haizaar@haizaar.com>
Gil Ran <gil@ran4.net>
SEE ALSO ldbash(1), libbash(1)Linux Epoch Linux