Sponsored Content
Operating Systems Solaris Sun Ultra 2 Hard Drive Replacement Post 302495222 by psantinello on Wednesday 9th of February 2011 04:55:45 PM
Old 02-09-2011
Quote:
Originally Posted by jlliagre
It would help if you answer to the questions that have been asked, i.e. tell what make, model, size and geometry are the old and new drives.

In any case, cloning a disk is usually done by copying the vtoc, then copying the data from the slices containing them, then installing the boot loader if a system disk.

However, it is unclear what you are trying to achieve. Backups are to be done before a drive fails, not after that. Were the two original disks configured in as a mirror ?
Hey...I am using Seagate ST39204LC 9GB drives in both instances at this point (new and old). Not sure of geometry.....where would I access that info? The new drive does not boot. I just wanted to copy everything on my existing drive to this new drive.

I have back-up of everything don't know where that came from.
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

hard drive in Sun Ultra 10

What are the options on upgrading disk space in an Ultra 10 workstation? Sun states they are EIDE drives, are they standard or Sun specific? Thanks (1 Reply)
Discussion started by: 98_1LE
1 Replies

2. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get... (1 Reply)
Discussion started by: brv
1 Replies

3. UNIX for Dummies Questions & Answers

Newbie: Sun Ultra 5 Disk Replacement

I have just started getting into unix and aquired a Sun Ultra 5 however the disk failed and I want to replace it with a spare maxtor 40Gb i have lying around. I need to partition and format the disk from its old windows format. I have looked up info on the format command in solaris 9 and I think i... (2 Replies)
Discussion started by: kalm
2 Replies

4. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies

5. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies

6. Solaris

USB Hard Disk Drive Supported by Sun Fire V890

Hi, Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup. Regards, Tushar Kathe (1 Reply)
Discussion started by: tushar_kathe
1 Replies

7. Solaris

Connect an External SCSI Hard Drive to Ultra 80

Guys, I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem. I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80. I connected it powered it up and at OK prompt did : boot -r system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies

8. Solaris

Sun Hard Drive Wipes

Greetings!! I've been tasked with decommissioning a group of older Sun servers. I have several SunFire 280r among them as well as some others. I have asolutely no experience with Sun systems and find myself in a bit of a pickle. I need two things ... someone to explain to me in grade... (5 Replies)
Discussion started by: Tenuous
5 Replies

9. Hardware

[solved] Sun Netra X1 - Adding a Second Hard Drive

As the title suggests, I'm trying to install a second drive (really want an OS mirror) on a Sun Netra X1. I've taken the spacer out, and had a go at with the drill-press so now I have a nice HDD tray. Have installed an IDE drive in the tray, plugged in the power and data cables that were... (0 Replies)
Discussion started by: Smiling Dragon
0 Replies
TRM(4)							   BSD Kernel Interfaces Manual 						    TRM(4)

NAME
trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver SYNOPSIS
trm* at pci? dev ? function ? scsibus* at trm? DESCRIPTION
The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC. HARDWARE
Supported SCSI controllers include: Tekram DC-315 PCI Ultra SCSI adapter without flash BIOS and internal SCSI connector Tekram DC-315U PCI Ultra SCSI adapter without flash BIOS Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector For Tekram DC-390 PCI SCSI host adapter, use pcscp(4) driver. For Tekram DC-310/U and DC-390U/UW/F PCI SCSI host adapters, use siop(4) driver. SEE ALSO
cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), ss(4), st(4), uk(4), scsipi(9) http://www.tekram.com/ AUTHORS
The trm driver was originally written for NetBSD 1.4/i386 by Erich Chen of Tekram Technology, and Rui-Xiang Guo rewrote the driver to use bus_space(9) and bus_dma(9) for NetBSD 1.6. BSD
November 6, 2001 BSD
All times are GMT -4. The time now is 08:31 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy