Hi:
I am in the process of configuring the SAN for Solaris to host 6 oracle 9i databases. We have 30 -146 GB disks stiped with RAID 10 for SAN. Of which 11 are dedicated for databsaes related things. Then we have 2 v880 Sun Servers with 16 -73 GB disks and 24 GB memory.
The questions... (1 Reply)
:) Hi everybody..
This is my firt post in this great forum.:
I have installed Sun Solaris 10 on an Intel machine..
Now i login in CDE desktop as root.
I want to switch between terminal screens pressing CTRL+ALT F1 (through F6) but nothing happens ??
any suggestions
thank you (2 Replies)
Hello all
I'm experimenting with the use of the -prune action and I've encountered some confusing behaviour when using the -o option. Can't find anything specific in the man page.
If I have a directory within my current directory called testlink and I run:-
find . -name testlink -prune
... (0 Replies)
I want to be able to use an account on a solaris 10 server, eg root@myhost
to act as a relay to forward mail to my domain account me@mycompany.com
The reason for this is to configure root@myhost as a mail relay on Brocade SAN switches - so that when a port goes bad i get an email alert.... (0 Replies)
Good morning,
I have 3 pSeries servers each with one internal boot VIOS and one boot-from-san VIOS... with numerous LPAR's running on top of them.
My question is: We are currently connecting to our IBM DS subsystem via a Cisco MDS 2GBPS SAN switch, we have recently purchased a Cisco MDS... (3 Replies)
Cannot get my Sun Solaris servers to log into a Brocade 5100. All fiber has been connected correctly and all drivers and firmware are loaded and up to date according to EMCGrab report. Below is an output from server. Please Help:
HBA Port WWN: 2100001b321063c4
OS Device Name: /dev/cfg/c3... (2 Replies)
Hi,
I have a question about Sun StorageTek Common Array Manager (CAM): What is the concept of 'host'? Is it the hostname of the server that has access to the managed array? If so, can I use its IP instead of its hostname?
I've found a 'host' under CAM called XYZ (See below). In our... (7 Replies)
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Discussion started by: BG_JrAdmin
4 Replies
LEARN ABOUT OPENSOLARIS
scconf_transp_adap_sci
scconf_transp_adap_sci(1M) System Administration Commands scconf_transp_adap_sci(1M)NAME
scconf_transp_adap_sci - configure the sci cluster transport adapter
DESCRIPTION
Note -
Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor-
mation about the object-oriented command set, see the Intro(1CL) man page.
You can configure sci SCI-PCI adapters as cluster transport adapters. These adapters can be used with the dlpi transport type.
The adapter name is sciN, for example, sci0. Do not use scidN as the adapter name.
An sci adapter can only be connected to another sci adapter or to an SCI switch. When an sci adapter is connected to an SCI switch, it is
important that you specify the correct port name when referring to a port on the switch as an endpoint argument to the scconf or scinstall
utility. The port name must match the port number on the SCI switch (the number that is printed on the switch itself). Failure to give the
correct port name could result in the operation failing. The result of providing an incorrect port name will be the same as you would see
if the cable between the adapter and the switch were removed.
There are no user-configurable properties for cluster transport adapters of this type.
SEE ALSO Intro(1CL), clinterconnect(1CL), clnode(1CL), scconf(1M), scconf_transp_jct_dolphinswitch(1M), scinstall(1M)Sun Cluster 3.2 4 May 2006 scconf_transp_adap_sci(1M)