Mulitple Zones on Dual NIC host Post: 302494747

9 More Discussions You Might Find Interesting

1. Solaris

Dual NIC problem

Hi, I have a problem with a server disconnecting from the network. This is a SUN box with dual NIC's running Solaris 8. We have a Nokia router that routes traffic but it's virtual address doesn't respond to pings. When the SUN box sends out a ping, if nothing comes back it will shut down...

2. AIX

Dual port NIC, cfgmgr

OS: AIX 6.1 The host has a dual port NIC installed and when I went to run `cfgmgr -v` to configure it I got an error showing device packages are missing from the install: `cfgmgr -v` on 10.15.xx.xxx cfgmgr: 0514-621 WARNING: The following device packages are required for device support but...

3. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux...

4. IP Networking

squid proxy: one NIC for inbound & one NIC for outbound?

I am new in squid proxy. My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)? Thank you in advance!

5. Solaris

How can I find which NIC is used to talk to a given host (except traceroute)

Hi all, I'm having some trouble identifying what route is being used to talk to a target host. I can figure it out by looking at the routing tables but I want to automate this and don't much feel like scripting the network mask logic when I'd think there'd be a way to have the OS do it for me....

6. Red Hat

I want to tune NIC's rps, rfs and xps value. which NIC device should I modify.

Dear All I want tune my NIC's rps, rfs and xps value. In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1). Here is the question? Which device should I modify ? eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0) Any advice is welcome....

7. Solaris

Network issue on multinic. Unable to ping a host from One NIC but other works

Dear, I hope you all will be ok. I have an issue with Solaris box running on x86 Blade. I am unable to ping a node neither traceroute. I am able to do traceroute from oce0:6 port which have IP and subnet of same type which oce0:1 has. details are as follows: Problem: root@rinams02:/#...

8. Solaris

Migration of Solaris 10 on physical host to Solaris Zones

Hi All Kindly let me know how can I move Solaris 10 OS running update 10 on physical machine to another machine solaris zone running Solaris 10 update 11

9. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected...

LEARN ABOUT OPENSOLARIS

zoneadmd

zoneadmd(1M)						  System Administration Commands					      zoneadmd(1M)

NAME

       zoneadmd - zone administration daemon

SYNOPSIS

       /usr/lib/zones/zoneadmd

DESCRIPTION

       zoneadmd is a system daemon that is started when the system needs to manage a particular zone. Because each instance of the zoneadmd daemon
       manages a particular zone, it is not unexpected to see multiple zoneadmd daemons running.

       This daemon is started automatically by the zone management software and should not be invoked directly. The daemon  shuts  down  automati-
       cally when no longer in use. It does not constitute a programming interface, but is classified as a private interface.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWzoneu 		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Private			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       svcs(1), zlogin(1), svcadm(1M), zoneadm(1M), attributes(5), smf(5), zones(5)

NOTES

       The zones(5) service is managed by the service management facility, smf(5), under the service identifier:

	 svc:/system/zones:default

       Administrative  actions	on  this  service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
       vice's status can be queried using the svcs(1) command.

SunOS 5.11							    1 Nov 2004							      zoneadmd(1M)