I want to skip the first cylinder (first 1 MB infact) while I partition my disk using fdisk as it is required that the disk partition to be used (for Oracle RAC Installation) must skip the first 1Mb to avoid overwriting the disk VTOC. The way I am using is:
Can anyone please guide me how to skip first 1 MB?
Hi All,
While my LINUX SERVER installed we didnt' used all the space for partitions. with what tool I can create a new partition or mount point to use the free space.
I tried the command fdisk and diskdruid. They are not working.
Thanks in advance
With Best regards,
Varma. (2 Replies)
Have a solaris x86 running solaris 9.
Root disk - logical - mirrored.
I added 2 more disks today - and I have mirrored them using array configuration utility.
I did a reconfiguration boot - and now I can see the logical disk using format:
I then partitioned this the way I wanted (I hope)... (4 Replies)
I have 3 disks to partition in following file system.
c1t1d0 = 72gb
/prod1
/prod2
/prod3
/prod4
/prod5
I am first time using "format" command to do this. How can i name with specified size.
-Adeel (1 Reply)
hi guys,
I've got a strange issue, may be one of you has experienced this.
SunOS 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V440
everything is mirrored.
My issue is that I have a umpty directory but seems to have data on. Let me show you
# df -h /data
Filesystem size used... (10 Replies)
Anyone know how to go about skipping the initial disk sync of a newly created drbd resource?
I'm creating brand new 30gb partitions and would like to skip the entire initial sync, I've read this is possible but I cannot seem to find the instructions to do it.
Thanks,
Trey (2 Replies)
Hi,
The disks of my servers are getting full and I need to move the /export/home partition on to a new set of disks. I already have 2 mirrored disks and have added 2 more and mirrored them after creating the filesystem on them.
Do I just need to edit the /etc/vfstab and point the /export/home... (1 Reply)
Hi Guys,
when performing a disk partition, can any file system other than root be giving to slice 0 or must slice0 hold only root? I am confused about this.
Any clarification will be greatly appreciated.
Thanks Guys (4 Replies)
Hello,
I am a new member of the forum.
I need an idea on how to partition the disk.
My situation is as follows:
I have two 3TB disks ognuno.In 6TB total then, but I have to do to force a RAID 1 so my space will be 3TB. I'll have to force install RedHat 5.8 and liquids is to be taken in... (4 Replies)
Discussion started by: Joaquin
4 Replies
LEARN ABOUT NETBSD
mbrlabel
MBRLABEL(8) BSD System Manager's Manual MBRLABEL(8)NAME
mbrlabel -- update disk label from MBR label(s)
SYNOPSIS
mbrlabel [-fqrw] [-s sector] device
DESCRIPTION
mbrlabel is used to update a NetBSD disk label from the Master Boot Record (MBR) label(s) found on disks that were previously used on
DOS/Windows systems (or other MBR using systems).
mbrlabel scans the MBR contained in the very first block of the disk (or the block specified through the -s flag), then walks through every
extended partition found and generates additional partition entries for the disk from the MBRs found in those extended partitions.
Each MBR partition which does not have an equivalent partition in the disk label (equivalent in having the same size and offset) is added to
the first free partition slot in the disk label. A free partition slot is defined as one with an fstype of 'unused' and a size of zero
('0'). If there are not enough free slots in the disk label, a warning will be issued.
The raw partition (typically partition c, but d on i386 and some other platforms) is left alone during this process.
By default, the proposed changed disk label will be displayed and no disk label update will occur.
Available options:
-f Force an update, even if there has been no change.
-q Performs operations in a quiet fashion.
-r In conjunction with -w, also update the on-disk label.
-s sector Specifies the logical sector number that has to be read from the disk in order to find the MBR. Useful if the disk has remapping
drivers on it and the MBR is located in a non-standard place. Defaults to 0.
-w Update the in-core label if it has been changed. See also -r.
SEE ALSO disklabel(8), dkctl(8), fdisk(8), mbr(8)HISTORY
The mbrlabel command appeared in NetBSD 1.4.
BSD April 5, 2010 BSD