solaris routing between two networks Post: 302487625

8 More Discussions You Might Find Interesting

1. IP Networking

routing problem in solaris

hi, below is the situation: my server is in 128.10.200.xxx network. i have a solaris computer running in a subnet. this computer got 2 nic card. 1 is 172.18.198.xxx , another 1 is 10.100.xxx.11 there is a machine stick with this computer, ip is 10.100.xxx.12 so, 10.100.xxx.11 and...

2. Solaris

Solaris zone routing table

Does anyone know how to delete a an ip off the routing table ? i tried route delete 10.0.0.0 and gateway but it still comes back. i have 2 zones sharing one interface. help...

3. IP Networking

solaris 8 networking routing

hi all, how do i make sure that the new routing should take effect on the os memory right away? what should i run after i add all the new "route add ....". I have an example below: bash-2.03# netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface...

4. Solaris

Routing problem of Solaris

Hi, I got problem of Sun Solaris 8 routing. IP of SunA is 10.16.64.164, and have routing table: 10.16.64.0 10.16.64.164 U 1 19236 bge1 10.6.0.0 10.6.0.3 U 1 16534 bge0 224.0.0.0 10.6.0.3 U 1 ...

5. Solaris

ip routing in solaris

I have a SUN ultra 5 machine running Solaris 6. it has two ethernet interfaces qe0 192.168.0.111 and qe1 192.168.1.111 the two subnets are 192.168.0.111 255.255.255.0 192.168.1.111 255.255.255.0 the specified routes are add route -net 192.168.0.0 255.255.255.0 192.168.0.111 add route...

6. IP Networking

solaris routing between two networks

ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2 inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255 ether 0:14:4f:55:82:9 ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3 inet 10.231.11.232 netmask...

7. Ubuntu

Routing trouble between multiple networks

Hi everyone, Hopefully there is someone here that can help me with the problem I got. At my office I have 1 ubuntu firewall/gateway and several networks. On the firewall/gateway I have three network cards, one for internet, one for network 192.168.100.0 and one for network 172.20.1.0 We...

8. Solaris

Solaris Routing

Hello All, Problem is that redundancy doesn't work, probably a routing issue I need to get sorted out When 172.29.11.x net is down, neither node3 nor node4 is trying 172.29.12.x network,The problem lies in network 172.29.13.x if 172.29.11.x network is down, node3/node4 should route to...

LEARN ABOUT OPENSOLARIS

xenconsoled

xenconsoled(1M) 					  System Administration Commands					   xenconsoled(1M)

NAME

       xenconsoled - xVM console daemon

SYNOPSIS

       /usr/lib/xenconsoled

DESCRIPTION

       The xenconsoled daemon provides control of the system consoles of Solaris xVM domains. To actually connect to a console, use the xm console
       command. See xm(1M).

   Service Management Facility Support
       The xenconsoled service is managed  by  the  service  management facility, smf(5), under the service identifier:

	 svc:/system/xvm/console:default

       Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed  using  svcadm(1M).  The  ser-
       vice's status can be queried using the svcs(1) command.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWxvmu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Volatile			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       svcs(1), svcadm(1M), svccfg(1M), svcs(1), xm(1M), xend(1M), attributes(5), smf(5), xVM(5)

SunOS 5.11							    26 Sep 2007 						   xenconsoled(1M)