Reserve Ports Post: 302485668

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Ports...

Hello UNIX people... This is my first foray into the UNIX world so go easy on me... I have a client who has hired me to do some work on his windows stuff, BUT it just so happens his UNIX server started giving him problems... He is running SCO Open Server 5.0.6 The TTY ports won't...

2. UNIX for Dummies Questions & Answers

Ports

Hi, is it possible to check to see if I can connect to a particular port on another machine? Thanks.

3. Solaris

Reserve Failed error for HD

Hi Guys, Anybody come across this error when formating a harddisk. "Reserved Failed" Supected hardisk failure, is my assumption correct. Thanks

4. Linux

proper way to reserve ports in linux

How do you debug a perl script non interactively, similar to bash -x?

5. Solaris

Reserve Memory for Global Zone

We have several containers on one machine and would like to reserve some memory for the global zone. capped-memory only allows max physical/swap and setting a max on each container isn't an option. The server has 32GB physical and 30GB swap. Currently there are ten containers on it. Normally...

6. Filesystems, Disks and Memory

Create file for space Reserve

Hi All, I want to make a 3GB of space reserve on Solaris. Let me know whether there is a way by creating empty file of 3GB so that i can delete that file in future to utilize that space. Or any other better ways for space reserve. -Vinodh' Kumar

7. Shell Programming and Scripting

Reserve resources (memory and processes)

I have a shell script which sets some variables and then calls modules of a program in succession, one by one. Problem is that the script is executed on servers with many users, so sometimes the script starts running, runs for 10 minutes and then breaks due to lack of resources when other users run...

8. UNIX for Advanced & Expert Users

Reserve Ephemeral ports

my apps use port 40001; however, for example, firstly, I ftp to other server, it made a high port locally, remote is port 21, unfortunately, it hit my port 40001 and my apps is unable to startup. This chance is very very little, but I hit it. Can resevse my port 40001? otherwise command don't use it

LEARN ABOUT DEBIAN

smp_rep_phy_event

SMP_REP_PHY_EVENT(8)						     SMP_UTILS						      SMP_REP_PHY_EVENT(8)

NAME

       smp_rep_phy_event - invoke REPORT PHY EVENT SMP function

SYNOPSIS

       smp_rep_phy_event [--help] [--hex] [--interface=PARAMS] [--phy=ID] [--raw] [--sa=SAS_ADDR] [--verbose] [--version] [--zero] SMP_DEVICE[,N]

DESCRIPTION

       Sends a SAS Management Protocol (SMP) REPORT PHY EVENT function request to a SMP target. The SMP target is identified by the SMP_DEVICE and
       the SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced from the SMP_DEVICE. The mpt interface uses SMP_DEVICE to identify  a
       HBA (an SMP initiator) and needs the additional ,N to differentiate between HBAs if there are multiple present.

OPTIONS

       Mandatory arguments to long options are mandatory for short options as well.

       -h, --help
	      output the usage message then exit.

       -H, --hex
	      output the response (less the CRC field) in hexadecimal.

       -I, --interface=PARAMS
	      interface  specific  parameters.	In this case "interface" refers to the path through the operating system to the SMP initiator. See
	      the smp_utils man page for more information.

       -p, --phy=ID
	      phy identifier. ID is a value between 0 and 254. Default is 0.

       -r, --raw
	      send the response (less the CRC field) to stdout in binary. All error messages are sent to stderr.

       -s, --sa=SAS_ADDR
	      specifies the SAS address of the SMP target device. Typically this is an expander. This option may not be needed if  the	SMP_DEVICE
	      has the target's SAS address within it. The SAS_ADDR is in decimal but most SAS addresses are shown in hexadecimal. To give a number
	      in hexadecimal either prefix it with '0x' or put a trailing 'h' on it.

       -v, --verbose
	      increase the verbosity of the output. Can be used multiple times

       -V, --version
	      print the version string and then exit.

NOTES

       Similar information is maintained for SAS SSP target phys (e.g. on a SAS disk). It can be obtained from the Protocol Specific Port log page
       with the sg_logs utility.

       Similar	information  may  be  obtained	for SAS initiator phys (e.g. on a SAS HBA). As an example in Linux 2.6.28 error information can be
       found in this directory /sys/class/sas_phy/phy-4:0 (for the phy 0 in SCSI/SAS host 4).

       Similar information may be obtained for SATA device phys (e.g. on a SATA disk). If there is a SAT layer between OS and the SATA device then
       the sg_sat_phy_event utility can fetch the information.

CONFORMING TO

       The SMP REPORT PHY EVENT function was introduced in SAS-2 .

AUTHORS

       Written by Douglas Gilbert.

REPORTING BUGS

       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT

       Copyright (C) 2011 Douglas Gilbert
       This  software  is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
       POSE.

SEE ALSO

       smp_utils, smp_phy_control, smp_rep_phy_event_list(smp_utils) sg_logs, sg_sat_phy_event(sg3_utils)

smp_utils-0.96							     May 2011						      SMP_REP_PHY_EVENT(8)