Open port on Solaris 10 Post: 302484965

9 More Discussions You Might Find Interesting

1. Programming

open an port on freebsd

i have made some thing with leds on it. i put it directly on the printer port. in dos and windows i can send data to it with outp(0x378,123); and then have some leds on and some leds off. i found out that it is possible linux with same assembly (after searching much.). but i want to have those led...

2. Solaris

Solaris 8 to many open port

hi all, My OS is solaris 8 with core system installation only. so far everything works fine. by i do some testing from my xp pc as client to nmap and scan opening port to my solaris. the result as below: Initiating SYN Stealth Scan against 10.10.10.10 at 16:25 Discovered open port 21/tcp on...

3. Linux

open port

How can I open a port on linux machine ???

4. IP Networking

Unknown open port: "6881/tcp open bittorrent-tracker" found with nmap

Hi. I ran nmap on my server, and I get the following: Starting Nmap 4.76 ( http://nmap.org ) at 2009-03-19 16:33 EDT Interesting ports on -------- (-----): Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 6881/tcp open bittorrent-tracker The...

5. Solaris

Unable to open 3966 port in solaris

Unable to open 3966 port for buildforge in Solaris 10, anyone pls help me how to open the 3966 port in solaris. Thanks in Advance

6. Solaris

Open port in Solaris 8 (not accessible from outside)

Hello guys, I've recentrly installed a Tomcat server in our Solaris 8 servers, and while it's properly configured and running already, I can't access the port from outside the network segment the server is on. I.e., we have 4 servers in the same segment (consecutive IP addresses), and if I...

7. Solaris

Is it possible to install Solaris softwares on Open Solaris or Open Indiana?

Hi there, I'm sorry in advance if my question seems stupid, but I can't figure out myself. I was wondering. Is it possible to install a Solaris program on an Open Solaris or Open Indiana operating system? After searching the web for a long time, it seems that Open Solaris was released by...

8. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

9. Solaris

Solaris 10: How to just open a port - nothing else

Hi there, I tried just open a port but I failed ;-( # telnet localhost 9876 That should work so I did ... # vi /etc/services myport 9876/tcp # my port # svcadm restart inetd -> New pid, see ps - ef | grep inet # netstat -an | grep 9876 No port 9876 is waiting ;( #...

LEARN ABOUT CENTOS

firewall-applet

FIREWALL-APPLET(1)						  firewall-applet						FIREWALL-APPLET(1)

NAME

       firewall-applet - firewalld applet

SYNOPSIS

       firewall-applet [OPTIONS...]

DESCRIPTION

       firewall-applet is a tray applet for firewalld.

OPTIONS

       firewall-applet does not support any special options. The only options that can be used are the general options that Gtk uses for Gtk
       application initialization. For more information on these options, please have a look at the runtime documentation for Gtk.

       The following options are supported:

       -h, --help
	   Prints a short help text and exists.

GSETTINGS

       firewall-applet has additional settings to adapt the look and feel. The used backend depends on the distribution and can be either dconf or
       GConf. The path to the settings is org.fedoraproject.FirewallApplet. You can use dconf-editor or gconf-editor to see and modify them.

       The following settings are supported:

       notifications
	   The applet shows notifications if enabled. This setting can be enabled also in the applet with the "Enable Notifications" checkbox in
	   the right mouse menu.

	   This setting defaults to false.

	   If notifications are shown for these actions if enabled:

	   o   Connection to firewalld established

	   o   Connection to firewalld lost

	   o   Firewall has been reloaded

	   o   Default zone has been changed

	   o   Panic mode has been enabled or disabled

	   o   Activation, deactivation or change of zones bound to interfaces

	   o   Activation, deactivation or change of zones bound to sources addresses

       show-inactive
	   Show applet also if firewalld is not running. If firewalld has been stopped or is not running the applet will be hidden and not visible
	   in the applet tray. Enable this setting to see the applet all the time for example to be sure that the firewall is active.

	   This setting defaults to false.

       shields-up
	   The shields-up zone name to be used if shields-up is enabled.

	   This setting defaults to 'block'.

       shields-down
	   The shields-down zone name to be used if shields-up has been deactivated again.

	   This setting defaults to 'public'.

       blink
	   If enabled, the applet icon blinks in these cases:

	   o   Connection to firewalld lost

	   o   Panic mode has been enabled or disabled

	   This setting defaults to false.

       blink-count
	   The number of blinks if blink is enabled.

	   This setting defaults to 5.

SEE ALSO

       firewall-applet(1), firewalld(1), firewall-cmd(1), firewall-config(1), firewalld.conf(5), firewalld.direct(5), firewalld.icmptype(5),
       firewalld.lockdown-whitelist(5), firewall-offline-cmd(1), firewalld.richlanguage(5), firewalld.service(5), firewalld.zone(5),
       firewalld.zones(5)

NOTES

       firewalld home page at fedorahosted.org:
	   http://fedorahosted.org/firewalld/

       More documentation with examples:
	   http://fedoraproject.org/wiki/FirewallD

AUTHORS

       Thomas Woerner <twoerner@redhat.com>
	   Developer

       Jiri Popelka <jpopelka@redhat.com>
	   Developer

firewalld 0.3.9 														FIREWALL-APPLET(1)