I have added a sun storage array from a faiulty server onto a new server and copied the md.conf files etc. I can now access the /dev/md/dsk file systems, but I want to delete some metadevices that do not exist (it still thinks the 0 and 1 (root /var /export) disk are mirrored. How do I do this? (8 Replies)
I am having trouble understanding the difference between a passthrough device and a named device and when you would use one or the other to access equipment.
As an example, we have a tape library and giving the command
"camcontrol devlist" gives the following output:
akx# camcontrol... (1 Reply)
Hi All,
Please help me on metastat and metadb. I don't where do start on doing queries on all these solaris 8 disk. Give me an idea and I will do the rest?
What's the command for verifying raid 1 or 5? Verify what's the adapter (scsi or san)?
Thanks in advance,
itik (5 Replies)
Hi All.
Been out of Unix admin work for about 10 years and I just took over a new position...
seeing the 'use metadb to delete databases which are broken message' on reboot. The system comes up but I'm not sure what's on this disk that's failing...
metadb -i shows:
excalibur# metadb... (1 Reply)
So I decided to set up Metadevices with Mirroring. When I patch, is it possible just to break the mirror, patch, Reboot. If all is well, then restore the mirror and resync?
Is metadevices equipped to resync like that? (7 Replies)
Hi, my root pool is as follows. How can I create a metadb if I want to create SVM volumes?
zpool status
pool: rpool1
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rpool1 ONLINE 0 0 0
c4t1d0s0 ... (10 Replies)
hi all , i need please help with this command i tried to create a metadb in live system , i got this message metadb: fintest: c0t0d0s7: overlaps with c0t0d0s0 which is mounted as '/'
any idea of who to do the creation with such problem (3 Replies)
Hi,
I have inherited a system with two disks mirrored, and only 1 metadb on each, I have deleted the db on c1t1 and recreated 3 which is fine.
But when it comes to c1t0, the metadb -d /dev/dsk/c1t0d0s5 doesnt removed the existing db and the create metadb -a -f -c3 /dev/dsk/c1t0dos5 wont... (0 Replies)
Discussion started by: richard.tarlton
0 Replies
LEARN ABOUT NETBSD
arcmsr
ARCMSR(4) BSD Kernel Interfaces Manual ARCMSR(4)NAME
arcmsr -- Areca Technology Corporation SATA/SAS RAID controller
SYNOPSIS
arcmsr* at pci? dev ? function ?
DESCRIPTION
The arcmsr driver provides support for the PCI-X and PCI Express RAID controllers from Areca Technology Corporation:
- ARC-1110 PCI-X 4 Port SATA RAID Controller
- ARC-1110ML PCI-X 4 Port SATA RAID Controller
- ARC-1120 PCI-X 8 Port SATA RAID Controller
- ARC-1120ML PCI-X 8 Port SATA RAID Controller
- ARC-1130 PCI-X 12 Port SATA RAID Controller
- ARC-1130ML PCI-X 12 Port SATA RAID Controller
- ARC-1160 PCI-X 16 Port SATA RAID Controller
- ARC-1160ML PCI-X 16 Port SATA RAID Controller
- ARC-1170 PCI-X 24 Port SATA RAID Controller
- ARC-1200 Rev A PCI Express 2 Port SATA RAID Controller
- ARC-1202 PCI Express 2 Port SATA RAID Controller
- ARC-1210 PCI Express 4 Port SATA RAID Controller
- ARC-1220 PCI Express 8 Port SATA RAID Controller
- ARC-1230 PCI Express 12 Port SATA RAID Controller
- ARC-1230ML PCI Express 12 Port SATA RAID Controller
- ARC-1231ML PCI Express 12 Port SATA RAID Controller
- ARC-1260 PCI Express 16 Port SATA RAID Controller
- ARC-1260ML PCI Express 16 Port SATA RAID Controller
- ARC-1261ML PCI Express 16 Port SATA RAID Controller
- ARC-1280 PCI Express 24 Port SATA RAID Controller
- ARC-1280ML PCI Express 24 Port SATA RAID Controller
- ARC-1680 PCI Express 8 Port SAS RAID Controller
- ARC-1680LP PCI Express 8 Port SAS RAID Controller
- ARC-1680i PCI Express 8 Port SAS RAID Controller
- ARC-1680x PCI Express 8 Port SAS RAID Controller
- ARC-1681 PCI-X 8 Port SAS RAID Controller
These controllers support RAID levels 0, 1, 1E, 3, 5, 6, and JBOD using either SAS or SATA II drives.
arcmsr supports management and monitoring of the controller through the bioctl(8) and envstat(8) commands.
Please note, however, that to use some features that require special privileges, such as creating/removing hot-spares, pass-through disks or
RAID volumes will require to have the password disabled in the firmware; otherwise a Permission denied error will be reported by bioctl(8).
When a RAID 1 or 1+0 volume is created, either through the bioctl(8) command or controller's firmware, the volume won't be accessible until
the initialization is done. A way to get access to the sd(4) device that corresponds to that volume without rebooting, is to issue the fol-
lowing command (once the initialization is finished):
$ scsictl scsibus0 scan any any
The arcmsr driver will also report to the kernel log buffer any error that might appear when handling firmware commands, such as used by the
bioctl(8) command.
EVENTS
The arcmsr driver is able to send events to powerd(8) if a volume or any drive connected to the volume is not online. The state-changed
event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens.
SEE ALSO intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8), scsictl(8)HISTORY
The arcmsr driver first appeared in NetBSD 5.0.
AUTHORS
The arcmsr driver was originally written for OpenBSD by David Gwynne. It was ported to NetBSD and extended by Juan Romero Pardines.
BSD March 3, 2008 BSD