You can test the firewall and PC X assuming :0.0 by going to the UNIX host and trying:
Now, if it cannot connect, you can go to the PC and try the same thing. If it works, it is firewall somewhere, and if not, the PC X service is not working. Also, try an Xterm or other X app on the PC to make sure X does more than connect there.
I have the following shell script to map a drive to a windows machine:
echo Enter password:
stty -echo
read passwd
stty echo
mount -t smbfs -ousername=myusername,password=$passwd //192.168.2.5/sharename /mnt/mountname
It works fine and the share mounts, but for some reason I get this... (4 Replies)
Hi everyone
first of all you should know that I've been working with solaris for a few days only. :)
I need to install some programs and I have had the following troubles:
1. When I used /.configure it showed the following message:
"no acceptable C compiler found in $PATH"
I included... (2 Replies)
Dear brothers.
i tried so many times to install openssl-0.9.8g in x86 machine. i have done ./config without any error notification. when i execute the make command i am having the same error
fatal error: Command failed for target `build_crypto'.
i installed c compiler the verson of... (1 Reply)
Hi ppl, anyone has encounter this error before? I can't remote login to another machine residing in the same subnet via CDE and the error I get in var/dt/Xerrors is
XDMCP fatal error: Session declined No valid address
Warning:
Name: submenu_options_button
Class: XmRowColumn
... (2 Replies)
Hi,
on a Linux RED HAT I issue the following to mount a shared filesystem on a Win server 2003 and it fails :
# smbmount //172.16.0.42/eb_depot /mnt/eb_depot -o username=domaine/Administrateur rw
Password:
30494: session setup failed: ERRDOS - ERRnoaccess (Access denied.)
SMB connection... (0 Replies)
Hi,
we have re installes our Windows domain and Activedirectory, and from then until now we can not mount shared windows filesystems on Linux server and we receive :
mount -t smbfs -o username=user1,password=xxxxx //xxx.16.0.xxx/dir
/mnt/dir
3550: session setup failed: ERRDOS - ERRnoaccess... (0 Replies)
Hi Friends
I have a compiler(Sun Forte,I believe) running in my Solaris 9 box.
since y'day my development team is finding this error when they compile:
ld.so.1: expr: fatal: libgmp.so.3: open failed: No such file or directory
I ran a search for this file and found it in one of my file... (2 Replies)
I am trying to install Expect 5.43 on my Solaris 10 x86 PC. When I run the make file I get - Command failed for target 'exp_inter.o'. I tried to find the file (find / -name exp_inter.o -print 2>/dev/null) but could not. Where can I get this file from? (2 Replies)
Hello all, I just post here to expose an issue I have encountered two days ago and finally successfully solve just right now using info on this site( but not only).
Config : Two SUN/ORACLE sparc Solaris 10 system.
Purpose : do a remote CDE login from host one to the host two.
method: from... (0 Replies)
Today, I noticed some errors in our SSL cert renewal log files, mostly related to domains where the IP address had changed. Concerned about this, rebuilt out SSL cert, which normally goes well without a hiccup.
However, for today, for some reason which I cannot explain, there was a PHP error... (0 Replies)
Discussion started by: Neo
0 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)