change NIC speed Post: 302475490

10 More Discussions You Might Find Interesting

1. Solaris

How to check Virtual NIC card speed on solaris

Hi, We have a 4 port Sun gigaswift NIC card on our sun fire server. If the card is a physical one I know how to check the settings/speed. But since this is a virtual card with 4 ports , I am not sure as how we can check the settings. Details ----------- root:/> ifconfig -a lo0:...

2. Solaris

Sun box's NIC speed setting

Is there a way to check if my Sun box's network interface card is set to 10 or 100 Mbps? Thanks!

3. UNIX for Dummies Questions & Answers

NIC and Device NO to Change

I am a beginer in unix . I would like to know what is the command in orser to change NIC and Device NO

4. IP Networking

NIC speed 100M/full duplex problem

I have a TOSHIBA AS7000 B150 Sun Box I wanted to run it with 100M/full duplex I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot. set eri:eri_adv_100fdx_cap=1 set eri:eri_adv_100hdx_cap=0 set eri:eri_adv_autoneg_cap=0 But when I...

5. Solaris

Change speed on network card

I recently learned that Sun Solaris network cards (ce devices) have problems with ndd -get commands. I did some searching and found out about the netstat -k command to show me the link speed. What is the best way to change the link speed (both one time and permanently)? I am running Solaris 9...

6. Linux

changing speed of NIC Card in linux

Hi, I would like to know how to change the speed of ethernet card in linux? as it is showing auto-neg using mii-tool -v eth0 and my requirement is 100mbps full duplex. Regards, Manoj

7. AIX

How to change Speed Duplex

How to change Speed Duplex ! How to change Speed Duplex by command chdev -P -l ent1 -a media_speed=1000_Full_Duplex How to change Speed Duplex by Smitty . smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ...

8. UNIX for Advanced & Expert Users

Determine the ethernet (NIC) card speed.

Hi, Does anyone know how can I determine the maximum capable speed on a network interface card for different OS like HP, Sun, AIX and Linux. I am aware of the tool "ethtool" which can be used for Linux. Are there any handly commands or /proc files where I can get this info depending on the OS....

9. Solaris

Supporting NIC speed

Hi, I have few Solaris (9 and 10) servers, whose consoles are running on 10 MBPs. Now, Network team is changing their switch, which doesn't support 10 MBPs and we need to check if console all of those servers will support 100MBPs or more. Is there any way to check supported (or maximum supported)...

10. Red Hat

Finding speed of NIC Card

Hi, I would like to know how to find out ACTUAL speed of NIC Card. I have used the command ethtool eth0, it is showing supported modes, but what is acutal speed ? how to find out?

LEARN ABOUT DEBIAN

mdbfontsize

mdbFontSize(5)							 The m17n Library						    mdbFontSize(5)

NAME

       mdbFontSize - Font Size

DESCRIPTION

       In some case, a font contains incorrect information about its size (typically in the case of a hacked TrueType font), which results in a
       bad text layout when such a font is used in combination with the other fonts. To overcome this problem, the m17n library loads information
       about font-size adjustment from the m17n database by the tags <font, resize>. The data is loaded as a plist of this format.

       FONT-SIZE-ADJUSTMENT ::= PER-FONT *

       PER-FONT ::= '(' FONT-SPEC ADJUST-RATIO ')'

       FONT-SPEC ::=
	   '(' [ FOUNDRY FAMILY
	      [ WEIGHT [ STYLE [ STRETCH [ ADSTYLE ]]]]]
	    REGISTRY ')'

       ADJUST-RATIO ::= INTEGER

       FONT-SPEC is to specify properties of a font. FOUNDRY to REGISTRY are symbols corresponding to Mfoundry to Mregistry property of a font.
       See m17nFont for the meaning of each property.

       ADJUST-RATIO is an integer number specifying by percentage how much the font-size must be adjusted. For instance, this PER-FONT:

	   ((devanagari-cdac) 150)

       instructs the font handler of the m17n library to open a font of 1.5 times bigger than a requested size on opening a font whose registry is
       'devanagari-cdac'.

COPYRIGHT

       Copyright (C) 2001 Information-technology Promotion Agency (IPA)
       Copyright (C) 2001-2011 National Institute of Advanced Industrial Science and Technology (AIST)
       Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License
       <http://www.gnu.org/licenses/fdl.html>.

Version 1.6.2							    12 Jan 2011 						    mdbFontSize(5)