11-24-2010
jumpstart Can't stat /dev/rdsk/c1t0d0s0 eror
I installed solaris 9u8 and flar image and put on my jumpstart server which is running 10u3. Then I do jumpstart with new image with same hardware. Jumpstart acts like it installs, configures, and looks generally good. However, During the boot process, it reports the following errors.
The / file system (/dev/rdsk/c1t0d0s0) is being checked.
Can't stat /dev/rdsk/c1t0d0s0
/dev/rdsk/c1t0d0s0: CAN'T CHECK FILE SYSTEM.
/dev/rdsk/c1t0d0s0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
Insterestingly, I am using this server to jumpstart 10 image and it works perfectly. Can anyone point out what is problem and how to solve it? thanks a lot.
10 More Discussions You Might Find Interesting
1. UNIX Desktop Questions & Answers
What if...
one startup OSX 10.2 for the first time and the only thing that is on the screen is ( sh-2.05a# ). Does anybody know what it mean and what to do with that?
What kind of command I have to respond?
:confused: (2 Replies)
Discussion started by: heabus
2 Replies
2. UNIX for Dummies Questions & Answers
what is the difference between using the following commands to image a drive besides one taking 9hours and the other 15min?
dd if=/dev/dsk/c0t5d0 of=/dev/dsk/c0t4d0 bs=1024k
dd if=/dev/rdsk/c0t5d0 of=/dev/rdsk/c0t4d0 bs=1024k
Is there reliability issues in one over the other. I have read... (3 Replies)
Discussion started by: aicjofs
3 Replies
3. Solaris
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
Discussion started by: civic2005
12 Replies
4. Filesystems, Disks and Memory
COuld you please telle me the diffrence between DSK and RDSK with exemple if possible...
Thanks a lot in advance.
Regards. (7 Replies)
Discussion started by: guillaume35
7 Replies
5. Solaris
Hello friends,
I Working with Solaris 8 on a SunFireV890, 150 GB SCSI HD's in Raid 1 (mirroring), my problem is that the master disk failed and going to put the slave (mirror) as a Master in the slot 0 (SCSI) will not start.
The original mounting this, mirror in Raid 0:
c1t0d0s0 (master)... (10 Replies)
Discussion started by: grymorum
10 Replies
6. Solaris
What can I fix this issue? I have ran below commands but everything is same.:confused:
WARNING: Last shutdown is later than time on time-of-day chip: check date.
The / file system (/dev/rdsk/c1t0d0s0) is being checked
WARNING - unable to repair the / filesystem. Run fsck manually (fsck -F... (4 Replies)
Discussion started by: getrue
4 Replies
7. Solaris
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Discussion started by: DustinT
13 Replies
8. AIX
Hi,
How can i check that i am using RAW devices for storage in my AIX machine...
Also after adding a LUN from storage to a aix host, when i check /dev in the host, i can see both rhdisk and hdisk with same number
eg:
dcback1(root):/dev>ls -lrt | grep disk12
crw------- 1 root ... (4 Replies)
Discussion started by: jibujacob
4 Replies
9. Shell Programming and Scripting
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
Discussion started by: RogerBaran
12 Replies
10. Red Hat
Hi,
Please suggest steps to change grub from /dev/sda to /dev/sdb, (1 Reply)
Discussion started by: manoj.solaris
1 Replies
LEARN ABOUT BSD
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)