FC port issue Post: 302466349

Sponsored Content

Operating Systems HP-UX FC port issue Post 302466349 by Sapfeer on Tuesday 26th of October 2010 08:30:06 AM

10-26-2010

Registered User

No, I don't think so... I'll check it

---------- Post updated at 16:30 ---------- Previous update was at 15:58 ----------

I've just restarted the port on SAN. Take a look at the logs:

Code:

Oct 26 15:26:10 terumos-bckp-srv2 vmunix: 0/2/1/1: Fibre Channel Driver received Link Dead Notification.
Oct 26 15:26:10 terumos-bckp-srv2 vmunix:
Oct 26 15:26:10 terumos-bckp-srv2 vmunix: class : tgtpath, instance 13
Oct 26 15:26:10 terumos-bckp-srv2 vmunix: class : tgtpath, instance 14
Oct 26 15:26:10 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=13) has gone offline.  The target path h/w path is 0/2/1/1.0x500110a0005a5be2
Oct 26 15:26:10 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=14) has gone offline.  The target path h/w path is 0/2/1/1.0x500110a0005a5bdc
Oct 26 15:26:10 terumos-bckp-srv2 vmunix: class : tgtpath, instance 12
Oct 26 15:26:10 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=12) has gone offline.  The target path h/w path is 0/2/1/1.0x100000e00244038d
Oct 26 15:26:10 terumos-bckp-srv2 vmunix: class : tgtpath, instance 11
Oct 26 15:26:10 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=11) has gone offline.  The target path h/w path is 0/2/1/1.0x500110a0005a5bdf
Oct 26 15:26:15 terumos-bckp-srv2 EMS [2388]: ------ EMS Event Notification ------   Value: "CRITICAL (5)" for Resource: "/adapters/events/ql_adapter/0_2_1_1"     (Threshold:  >= "
 3")    Execute the following command to obtain event details:   /opt/resmon/bin/resdata -R 156499973 -r /adapters/events/ql_adapter/0_2_1_1 -n 156499974 -a
Oct 26 15:26:10 terumos-bckp-srv2 vmunix:
Oct 26 15:26:15 terumos-bckp-srv2  above message repeats 4 times
Oct 26 15:27:09 terumos-bckp-srv2 vmunix: class : tgtpath, instance 12
Oct 26 15:27:09 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=12) has gone online.  The target path h/w path is 0/2/1/1.0x100000e00244038d
Oct 26 15:27:09 terumos-bckp-srv2 vmunix:
Oct 26 15:27:09 terumos-bckp-srv2 vmunix: class : tgtpath, instance 14
Oct 26 15:27:09 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=14) has gone online.  The target path h/w path is 0/2/1/1.0x500110a0005a5bdc
Oct 26 15:27:09 terumos-bckp-srv2 vmunix: class : tgtpath, instance 11
Oct 26 15:27:09 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=11) has gone online.  The target path h/w path is 0/2/1/1.0x500110a0005a5bdf
Oct 26 15:27:09 terumos-bckp-srv2 vmunix: class : tgtpath, instance 13
Oct 26 15:27:09 terumos-bckp-srv2 vmunix: Target path (class=tgtpath, instance=13) has gone online.  The target path h/w path is 0/2/1/1.0x500110a0005a5be2

Last edited by Sapfeer; 10-26-2010 at 09:09 AM..

Sapfeer

View Public Profile for Sapfeer

Find all posts by Sapfeer

10 More Discussions You Might Find Interesting

1. HP-UX

PXE boot port issue

Hi,all: I want to boot an IA unix box from network, I am sure I set the DHCP and boot server, but it still failed ! It says : Client MAC Address: 00 18 FE 28 91 82 .....- PXE-E16: Valid PXE offer not received. Load of Core LAN Gb A failed: Not Found I use the nettl command to trace the UDP...

2. Solaris

Serial port issue

Hi, I am working with Sun Solaris 9 Sparc,Sun-Blade-100.In my application,I need to monitor the UPS using Serial port. When I am using JRE 1.4 in my application,I am able to monitor it but when I am upgrading the JRE version from 1.4 to JRE1.6. I am not able to monitor the UPS.It is showing the...

3. AIX

Port hang issue in AIX Version 5.3

On AIX platform we are having Weblogic 8.1 as the middleware for an application. The application is deployed in Weblogic on AIX platform and the server is having 2 dedicated listening ports for any incoming requests. Output for netstat -an command for the port 30001 is as follows:- tcp4...

4. Programming

Locking issue with serial port

Hi, In my application,I need to monitor the devices connected through serial port in solaris sparc 9 OS.I used c and java code for it and I am able to do the same but the problem comes when I restart the system and the open my application and try to monitor it.but I m unable to monitor the...

5. Red Hat

Help needed in fixing port issue - Urgent

Hi, One of our web application is running in Linux and using apache web servers. Application is hosted in port 4080 (for soap requests) and port 9999, and its serving behind a vip and cname. Initially it was working fine in another server and recently (2 months back) we have moved to the new...

6. Red Hat

HP Data Protector port 5555 issue

Dear All, I have my HP Data Protector installed on the backup server. I want to connect this backup server with the client server through telnet port 5555 like below telnet < ipaddress of client> 5555 But when I try like this , it says ...Connection refused ...unable to connect to...

7. IP Networking

port state issue

Hello, I have following issue: traceroute connection works to given address(ip + port) but telnet(and other network tools) do not. How it is possible? telnet 10.150.184.225 443 Connection refused tracert -T -p 443 10.150.184.225 traceroute to 10.150.184.225 (10.150.184.225), 30 hops...

8. IP Networking

Facing issue in ip6table rule for port based routing management

Hi, Please help me on issue described below, I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4. M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop. At M2, I have done following,...

9. IP Networking

Port forwarding issue

hi guys i have a simple question ! i have two ips . a valid and internal(172.16.11.2) i want to use port forwarding to forward any request to valid IP port 8001 to internal ip port 80 . i use this rule : sysctl -w net.ipv4.ip_forward=1 iptables -t nat -A PREROUTING -p tcp...

10. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT CENTOS

fp

fp(7d)                                                                Devices                                                               fp(7d)

NAME

       fp - Sun Fibre Channel port driver

DESCRIPTION

       The  fp  driver  is a Sun fibre channel nexus driver that enables fibre channel topology discovery, device discovery, fibre channel adapter
       port management and other capabilities through well-defined fibre channel adapter driver interfaces.

       The fp driver requires the presence of a fabric name server in fabric and public loop topologies to discover fibre channel devices. In pri-
       vate  loop  topologies,  the  driver discovers devices by performing PLOGI to all valid AL_PAs, provided that devices do not participate in
       LIRP and LILP stages of loop initialization.

CONFIGURATION

       The fp driver is configured by defining  properties in the fp.conf file. The fp driver supports the following properties:

   mpxio-disable
       Solaris I/O multipathing is enabled or disabled on fibre channel devices with the  mpxio-disable  property.  Specifying  mpxio-disable="no"
       activates I/O multipathing, while mpxio-disable="yes" disables the feature.

       Solaris  I/O  multipathing  may be enabled or disabled on a per port basis. Per port settings override the global setting for the specified
       ports. The following example shows how to disable multipathing on port 0 whose parent is /pci@8,600000/SUNW,qlc@4:

       name="fp"    parent="/pci@8,600000/SUNW,qlc@4"    port=0
       mpxio-disable="yes";

   manual_configuration_only
       Automatic configuration of SCSI devices in the fabric is enabled by default and thus allows all devices discovered in the SAN zone  to   be
       enumerated   in  the  kernel's  device tree automatically. The manual_configuration_only property may be configured  to disable the default
       behavior and force the manual configuration of the devices in the SAN. Specifying manual_configuration_only=1 disables the  automatic  con-
       figuration of devices.

FILES

       /kernel/drv/fp

           32-bit ELF kernel driver (x86)

       /kernel/drv/amd64/fp

           64-bit ELF kernel driver (x86)

       /kernel/drv/sparcv9/fp

           64-bit ELF kernel driver (SPARC)

       /kernel/drv/fp.conf

           fp driver configuration file.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |mpxio-disable                |Unstable                     |
       +-----------------------------+-----------------------------+
       |manual_configuration_only    |Obsolete                     |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWfctl                     |
       +-----------------------------+-----------------------------+

SEE ALSO

       cfgadm_fp(1M), prtconf(1M), stmsboot(1M), driver.conf(4), attributes(5), fcp(7D), fctl(7D), scsi_vhci(7D)

       Writing Device Drivers

       Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230: 1994

       Fibre Channel Generic Services (FC-GS-2) Project 1134-D

       Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.272-1996

       Fibre Channel Protocol for SCSI (FCP) ANSI X3.269-1996

       SCSI-3 Architecture Model (SAM) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996

       SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996

       SCSI Direct Attach (FC-PLDA) NCITS TR-19:1998

       Fabric Loop Attachment (FC-FLA), NCITS TR-20:1998

SunOS 5.10                                                          2 Dec 2004                                                              fp(7d)