This seems to be a zsh specific issue (i can reproduce it with zsh). Try to quote the argument
or use a different shell. It doesn't have to do anything with I/O errors.
After upgrading to solaris 10 (from sol 8) on a SUN Blade 1500, it seems that the dvd/cd-rom does not accept dvds nor cds in the dvd drive.
After I insert a dvd/cd in the drive, the disk is simply ejected (!)
Is it possible that the upgrade made the system not being able to recognize these... (2 Replies)
Hi everyone,
I am having a problem when running devfsadm. We have many T2000, but on one of them, that is connected to our SAN, devfsadm reports no new disks. If a reconfiguration reboot is done, the system reports the new disk. But only with a reboot. We have Solaris10 installed and Veritas... (13 Replies)
Hi,
I have a netra t2000 running solaris 10. It is fully patched with the latest patch cluster and also patch 118833-36 and 126897-02. The SC sys_event level is set to 3.
I am running a test to show hardware log status, e.g simulating a power supply failure.Hence I unplug one of te... (3 Replies)
Hi, a couple of T2000 servers did not show the component status and the output was too short. There was a patch that needed to be installed. I also updated to the latest recommended patch cluster and OBP patch.
After reboot/restart of picl, it worked ok for a couple of weeks. Then suddenly it went... (12 Replies)
Friends ,
I want to install package using yum from DVD in RHEL 5 . Hence I just follow the below rules :
1)
# mount /dev/hdc /cdrom/
mount: block device /dev/hdc is write-protected, mounting read-only
2)
Edit the yum rhel-debuginfo.repo file like following way :
# pwd... (3 Replies)
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Hi all,
First post so be gentile :)
It's my first time installing Solaris on T2000 server.
I have 2 72GB HD's on it.
After configuring HW raid and running raidctl command I get this output:
bash-3.00# raidctl -l c0t0d0
Volume Size Stripe Status Cache RAID
... (2 Replies)
Hi,
I have a problem controlling devices on my iMac.
The internal DVD is no longer working. Therefore I have bought a new external DVD, but some programs use the internal by default.
Since iMac, runs UNIX beneath the Mac OS X, I hope to do some magic, by unmounting the internal DVD and put... (0 Replies)
Discussion started by: ASL123
0 Replies
LEARN ABOUT DEBIAN
autofs
AUTOFS(8) System Manager's Manual AUTOFS(8)NAME
/etc/init.d/autofs - Control Script for automounter
SYNOPSIS
/etc/init.d/autofs start|stop|restart|reload|status
DESCRIPTION
autofs control the operation of the automount(8) daemons running on the Linux system. Usually autofs is invoked at system boot time with
the start parameter and at shutdown time with the stop parameter. The autofs script can also manually be invoked by the system administra-
tor to shut down, restart or reload the automounters.
OPERATION
autofs will consult a configuration file /etc/auto.master (see auto.master(5)) by default to find mount points on the system. For each of
those mount points automount(8) will mount and start a thread, with the appropriate parameters, to manage the mount point.
/etc/init.d/autofs reload will check the current auto.master map against running daemons. It will kill those daemons whose entries have
changed and then start daemons for new or changed entries.
If a map is modified then the change will become effective immediately. If the auto.master map is modified then the autofs script must be
rerun to activate the changes.
/etc/init.d/autofs status will display the status of, automount(8), running or not.
SEE ALSO automount(8), autofs(5), auto.master(5). autofs_ldap_auth.conf(5)AUTHOR
This manual page was written by Christoph Lameter <chris@waterf.org>, for the Debian GNU/Linux system. Edited by H. Peter Anvin
<hpa@transmeta.com>.
9 Sep 1997 AUTOFS(8)