This seems to be a zsh specific issue (i can reproduce it with zsh). Try to quote the argument
or use a different shell. It doesn't have to do anything with I/O errors.
After upgrading to solaris 10 (from sol 8) on a SUN Blade 1500, it seems that the dvd/cd-rom does not accept dvds nor cds in the dvd drive.
After I insert a dvd/cd in the drive, the disk is simply ejected (!)
Is it possible that the upgrade made the system not being able to recognize these... (2 Replies)
Hi everyone,
I am having a problem when running devfsadm. We have many T2000, but on one of them, that is connected to our SAN, devfsadm reports no new disks. If a reconfiguration reboot is done, the system reports the new disk. But only with a reboot. We have Solaris10 installed and Veritas... (13 Replies)
Hi,
I have a netra t2000 running solaris 10. It is fully patched with the latest patch cluster and also patch 118833-36 and 126897-02. The SC sys_event level is set to 3.
I am running a test to show hardware log status, e.g simulating a power supply failure.Hence I unplug one of te... (3 Replies)
Hi, a couple of T2000 servers did not show the component status and the output was too short. There was a patch that needed to be installed. I also updated to the latest recommended patch cluster and OBP patch.
After reboot/restart of picl, it worked ok for a couple of weeks. Then suddenly it went... (12 Replies)
Friends ,
I want to install package using yum from DVD in RHEL 5 . Hence I just follow the below rules :
1)
# mount /dev/hdc /cdrom/
mount: block device /dev/hdc is write-protected, mounting read-only
2)
Edit the yum rhel-debuginfo.repo file like following way :
# pwd... (3 Replies)
Hi All
I have a problem on T2000 server.
bash-3.00# uname -a
SunOS 5.10 aaa Generic_120011-14 sun4v sparc SUNW,Netra-T2000After the initial solaris installation server failed to boot:
Rebooting with command: boot
Boot device: disk:b File and args:
The file just loaded does not appear... (1 Reply)
Hi all,
First post so be gentile :)
It's my first time installing Solaris on T2000 server.
I have 2 72GB HD's on it.
After configuring HW raid and running raidctl command I get this output:
bash-3.00# raidctl -l c0t0d0
Volume Size Stripe Status Cache RAID
... (2 Replies)
Hi,
I have a problem controlling devices on my iMac.
The internal DVD is no longer working. Therefore I have bought a new external DVD, but some programs use the internal by default.
Since iMac, runs UNIX beneath the Mac OS X, I hope to do some magic, by unmounting the internal DVD and put... (0 Replies)
Discussion started by: ASL123
0 Replies
LEARN ABOUT DEBIAN
cut-diff
CUT-DIFF(1) Cutter's manual CUT-DIFF(1)NAME
cut-diff - show difference between 2 files with color
SYNOPSIS
cut-diff [option ...] file1 file2
DESCRIPTION
cut-diff is a diff command that uses diff feature in Cutter. It shows difference with color.
It's recommended that you use a normal diff(1) when you want to use with patch(1) or you don't need color.
OPTIONS --version
cut-diff shows its own version and exits.
-c [yes|true|no|false|auto], --color=[yes|true|no|false|auto]
If 'yes' or 'true' is specified, cut-diff uses colorized output by escape sequence. If 'no' or 'false' is specified, cut-diff never
use colorized output. If 'auto' or the option is omitted, cut-diff uses colorized output if available.
The default is auto.
-u, --unified
cut-diff uses unified diff format.
--context-lines=LINES
Shows diff context around LINES.
All lines are shown by default. When unified diff format is used, 3 lines are shown by default.
--label=LABEL, -L=LABEL
Uses LABEL as a header label. The first--label option value is used as file1's label and the second --label option value is used
asfile2's label.
Labels are the same as file names by default.
EXIT STATUS
The exit status is 0 for success, non-0 otherwise.
TODO: 0 for non-difference, 1 for difference and non-0 for errors.
EXAMPLE
In the following example, cut-diff shows difference between file1 and file2:
% cut-diff file1 file2
In the following example, cut-diff shows difference between file1 and file2 with unified diff format:
% cut-diff -u file1 file2
SEE ALSO diff(1)Cutter February 2011 CUT-DIFF(1)