CPIO(1L)																  CPIO(1L)

NAME

       cpio - copy files to and from archives

SYNOPSIS

       Copy-out mode

       In copy-out mode, cpio copies files into an archive.  It reads a list of filenames, one per line, on the standard input, and writes the ar-
       chive onto the standard output.	A typical way to generate the list of filenames is with the find command; you should give find the  -depth
       option to minimize problems with permissions on directories that are unreadable.  see "Options".

       cpio   {-o|--create}   [-0acvABLV]   [-C   bytes]   [-H	 format]   [-M	message]  [-O  [[user@]host:]archive]  [-F  [[user@]host:]archive]
       [--file=[[user@]host:]archive] [--format=format] [--warning=FLAG]  [--message=message][--null]  [--reset-access-time]  [--verbose]  [--dot]
       [--append]  [--block-size=blocks]  [--dereference]  [--io-size=bytes] [--rsh-command=command]  [--license] [--usage] [--help] [--version] <
       name-list [> archive]

       Copy-in mode

       In copy-in mode, cpio copies files out of an archive or lists the archive contents.  It reads the archive from  the  standard  input.   Any
       non-option  command  line  arguments are shell globbing patterns; only files in the archive whose names match one or more of those patterns
       are copied from the archive.  Unlike in the shell, an initial `.' in a filename does match a wildcard at the start of a pattern, and a  `/'
       in a filename can match wildcards.  If no patterns are given, all files are extracted.  see "Options".

       cpio  {-i|--extract}  [-bcdfmnrtsuvBSV] [-C bytes] [-E file] [-H format] [-M message] [-R [user][:.][group]] [-I [[user@]host:]archive] [-F
       [[user@]host:]archive] [--file=[[user@]host:]archive] [--make-directories] [--nonmatching]  [--preserve-modification-time]  [--numeric-uid-
       gid]  [--rename]  [-t|--list] [--swap-bytes] [--swap] [--dot] [--warning=FLAG] [--unconditional] [--verbose] [--block-size=blocks] [--swap-
       halfwords] [--io-size=bytes] [--pattern-file=file] [--format=format] [--owner=[user][:.][group]] [--no-preserve-owner]  [--message=message]
       [--force-local] [--no-absolute-filenames] [--absolute-filenames] [--sparse] [--only-verify-crc] [--to-stdout] [--quiet] [--rsh-command=com-
       mand] [--license] [--usage] [--help] [--version] [pattern...] [< archive]

       Copy-pass mode

       In copy-pass mode, cpio copies files from one directory tree to another, combining the copy-out and copy-in steps without actually using an
       archive.   It  reads the list of files to copy from the standard input; the directory into which it will copy them is given as a non-option
       argument.  see "Options".

       cpio {-p|--pass-through} [-0adlmuvLV] [-R [user][:.][group]] [--null] [--reset-access-time] [--make-directories] [--link] [--quiet] [--pre-
       serve-modification-time] [--unconditional] [--verbose] [--dot] [--warning=FLAG] [--dereference] [--owner=[user][:.][group]] [--no-preserve-
       owner] [--sparse]  [--license] [--usage] [--help] [--version] destination-directory < name-list

DESCRIPTION

       GNU cpio is a tool for creating and extracting archives, or copying files from one place to another.  It handles a number of  cpio  formats
       as well as reading and writing tar files.

       Following archive formats are supported: binary, old ASCII, new ASCII, crc, HPUX binary, HPUX old ASCII, old tar, and POSIX.1 tar.  The tar
       format is provided for compatibility with the tar program. By default, cpio creates binary format archives, for	compatibility  with  older
       cpio programs.  When extracting from archives, cpio automatically recognizes which kind of archive it is reading and can read archives cre-
       ated on machines with a different byte-order.

OPTIONS

       `-0, --null'
	      Read a list of filenames terminated by a null character, instead of a newline, so that files whose names	contain  newlines  can	be
	      archived.   GNU  find  is one way to produce a list of null-terminated filenames.  This option may be used in copy-out and copy-pass
	      modes.

       `-a, --reset-access-time'
	      Reset the access times of files after reading them, so that it does not look like they have just been read.

       `-A, --append'
	      Append to an existing archive.  Only works in copy-out mode.  The archive must be a disk file specified with the -O  or  -F  (-file)
	      option.

       `-b, --swap'
	      Swap  both halfwords of words and bytes of halfwords in the data.  Equivalent to -sS.  This option may be used in copy-in mode.  Use
	      this option to convert 32-bit integers between big-endian and little-endian machines.

       `-B'   Set the I/O block size to 5120 bytes.  Initially the block size is 512 bytes.

       `--block-size=BLOCK-SIZE'
	      Set the I/O block size to BLOCK-SIZE * 512 bytes.

       `-c'   Identical to "-H newc", use the new (SVR4) portable format.  If you wish the old portable  (ASCII)  archive  format,  use  "-H  odc"
	      instead.

       `-C IO-SIZE, --io-size=IO-SIZE'
	      Set the I/O block size to IO-SIZE bytes.

       `-d, --make-directories'
	      Create leading directories where needed.

       `-E FILE, --pattern-file=FILE'
	      Read  additional patterns specifying filenames to extract or list from FILE.  The lines of FILE are treated as if they had been non-
	      option arguments to cpio.  This option is used in copy-in mode,

       `-f, --nonmatching'
	      Only copy files that do not match any of the given patterns.

       `-F, --file=archive'
	      Archive filename to use instead of standard input or output.  To use a tape drive on another machine as the archive, use a  filename
	      that  starts  with `HOSTNAME:'.  The hostname can be preceded by a username and an `@' to access the remote tape drive as that user,
	      if you have permission to do so (typically an entry in that user's `~/.rhosts' file).

       `--force-local'
	      With -F, -I, or -O, take the archive file name to be a local file even if it contains a colon, which  would  ordinarily  indicate  a
	      remote host name.

       `-H FORMAT, --format=FORMAT'
	      Use  archive  format  FORMAT.   The  valid formats are listed below; the same names are also recognized in all-caps.  The default in
	      copy-in mode is to automatically detect the archive format, and in copy-out mode is `bin'.

       `bin'  The obsolete binary format.

       `odc'  The old (POSIX.1) portable format.

       `newc' The new (SVR4) portable format, which supports file systems having more than 65536 i-nodes.

       `crc'  The new (SVR4) portable format with a checksum (Sum32) added.

       `tar'  The old tar format.

       `ustar'
	      The POSIX.1 tar format.  Also recognizes GNU tar archives, which are similar but not identical.

       `hpbin'
	      The obsolete binary format used by HPUX's cpio (which stores device files differently).

       `hpodc'
	      The portable format used by HPUX's cpio (which stores device files differently).

       `-i, --extract'
	      Run in copy-in mode.  see "Copy-in mode".

       `-I archive'
	      Archive filename to use instead of standard input.  To use a tape drive on another machine as  the  archive,  use  a  filename  that
	      starts with `HOSTNAME:'.	The hostname can be preceded by a username and an `@' to access the remote tape drive as that user, if you
	      have permission to do so (typically an entry in that user's `~/.rhosts' file).

       `-k'   Ignored; for compatibility with other versions of cpio.

       `-l, --link'
	      Link files instead of copying them, when possible.

       `-L, --dereference'
	      Copy the file that a symbolic link points to, rather than the symbolic link itself.

       `-m, --preserve-modification-time'
	      Retain previous file modification times when creating files.

       `-M MESSAGE, --message=MESSAGE'
	      Print MESSAGE when the end of a volume of the backup media (such as a tape or a floppy disk) is  reached,  to  prompt  the  user	to
	      insert a new volume.  If MESSAGE contains the string "%d", it is replaced by the current volume number (starting at 1).

       `-n, --numeric-uid-gid'
	      Show numeric UID and GID instead of translating them into names when using the `--verbose option'.

       `--no-absolute-filenames'
	      Create all files relative to the current directory in copy-in mode, even if they have an absolute file name in the archive.

       `--absolute-filenames' (default)
	      Do not strip leading file name components that contain ".."  and leading slashes from file names in copy-in mode

       `--no-preserve-owner'
	      Do  not change the ownership of the files; leave them owned by the user extracting them.	This is the default for non-root users, so
	      that users on System V don't inadvertently give away files.  This option can be used in copy-in mode and copy-pass mode

       `-o, --create'
	      Run in copy-out mode.  see "Copy-out mode".

       `-O archive'
	      Archive filename to use instead of standard output.  To use a tape drive on another machine as the  archive,  use  a  filename  that
	      starts with `HOSTNAME:'.	The hostname can be preceded by a username and an `@' to access the remote tape drive as that user, if you
	      have permission to do so (typically an entry in that user's `~/.rhosts' file).

       `--only-verify-crc'
	      Verify the Sum32 checksum's of each file in the archive, when reading a crc format archive. Don't actually extract the files.

       `-p, --pass-through'
	      Run in copy-pass mode.  see "Copy-pass mode".

       `--quiet'
	      Do not print the number of blocks copied.

       `-r, --rename'
	      Interactively rename files.

       `-R [user][:.][group], --owner [user][:.][group]'
	      Set the ownership of all files created to the specified user and/or group in copy-out and copy-pass modes.   Either  the	user,  the
	      group,  or  both, must be present.  If the group is omitted but the ":" or "." separator is given, use the given user's login group.
	      Only the super-user can change files' ownership.

       `--rsh-command=COMMAND'
	      Notifies cpio that is should use COMMAND to communicate with remote devices.

       `-s, --swap-bytes'
	      Swap the bytes of each halfword (pair of bytes) in the files.This option can be used in copy-in mode.

       `-S, --swap-halfwords'
	      Swap the halfwords of each word (4 bytes) in the files.  This option may be used in copy-in mode.

       `--sparse'
	      Write files with large blocks of zeros as sparse files.  This option is used in copy-in and copy-pass modes.

       `-t, --list'
	      Print a table of contents of the input.

       `--to-stdout'
	      Extract files to standard output.  This option may be used in copy-in mode.

       `-u, --unconditional'
	      Replace all files, without asking whether to replace existing newer files with older files.

       `-v, --verbose'
	      List the files processed, or with `-t', give an `ls -l' style table of contents listing.	In a verbose table of contents of a  ustar
	      archive, user and group names in the archive that do not exist on the local system are replaced by the names that correspond locally
	      to the numeric UID and GID stored in the archive.

       `-V, --dot'
	      Print a `.' for each file processed.

       `-W, --warning'
	      Control warning display. Currently FLAG is one of 'none', 'truncate', 'all'. Multiple options accumulate.

       `--license'
	      Print license and exit.

       `?, --help'
	      Give a help page similar to this manpage.

       `--usage'
	      Give a short usage message.

       `--version'
	      Print the cpio program version number and exit.

EXAMPLES

       When creating an archive, cpio takes the list of files to be processed from the standard input, and then sends the archive to the  standard
       output,	or  to the device defined by the `-F' option.  Usually find or ls is used to provide this list to the standard input.  In the fol-
       lowing example you can see the possibilities for archiving the contents of a single directory.

       % ls | cpio -ov > directory.cpio

       The `-o' option creates the archive, and the `-v' option prints the names of the files archived as they are added.  Notice that the options
       can  be	put  together  after  a single `-' or can be placed separately on the command line.  The `>' redirects the cpio output to the file
       `directory.cpio'.

       If you wanted to archive an entire directory tree, the find command can provide the file list to cpio:

       % find . -print -depth | cpio -ov > tree.cpio

       This will take all the files in the current directory, the directories below and place them in the archive tree.cpio.  Again the `-o'  cre-
       ates an archive, and the `-v' option shows you the name of the files as they are archived.  see "Copy-out mode".  Using the `.' in the find
       statement will give you more flexibility when doing restores, as it will save file names with a relative path vice a hard  wired,  absolute
       path.   The  `-depth'  option  forces  `find' to print of the entries in a directory before printing the directory itself.  This limits the
       effects of restrictive directory permissions by printing the directory entries in a directory before the directory name itself.

       Extracting an archive requires a bit more thought because cpio will not create directories by default.  Another characteristic, is it  will
       not overwrite existing files unless you tell it to.

       % cpio -iv < directory.cpio

       This will retrieve the files archived in the file directory.cpio and place them in the present directory.  The `-i' option extracts the ar-
       chive and the `-v' shows the file names as they are extracted.  If you are dealing with an archived directory tree, you	need  to  use  the
       `-d' option to create directories as necessary, something like:

       % cpio -idv < tree.cpio

       This  will  take  the contents of the archive tree.cpio and extract it to the current directory.  If you try to extract the files on top of
       files of the same name that already exist (and have the same or later modification time) cpio will not extract the file unless told  to	do
       so by the -u option.  see "Copy-in mode".

       In copy-pass mode, cpio copies files from one directory tree to another, combining the copy-out and copy-in steps without actually using an
       archive.  It reads the list of files to copy from the standard input; the directory into which it will copy them is given as  a	non-option
       argument.  see "Copy-pass mode".

       % find . -depth -print0 | cpio --null -pvd new-dir

       The  example shows copying the files of the present directory, and sub-directories to a new directory called new-dir.  Some new options are
       the `-print0' available with GNU find, combined with the `--null' option of cpio.  These two  options  act  together  to  send  file  names
       between	find  and cpio, even if special characters are embedded in the file names.  Another is `-p', which tells cpio to pass the files it
       finds to the directory `new-dir'.

BUGS

       The GNU folks, in general, abhor man pages, and create info documents instead.  The maintainer of cpio falls into   this   category.   Thus
       this man page may not be complete, nor current, and was included in the Red Hat CVS tree because man is a great tool :).

REPORTING BUGS

       Please report bugs via https://bugzilla.redhat.com.

SEE ALSO

       The  full documentation for cpio is maintained as a Texinfo manual.  If the info and cpio programs are properly installed at your site, the
       command

	      info cpio

       should give you access to the complete manual. The online copy of the documentation is available at the following address:

       http://www.gnu.org/software/cpio/manual

																	  CPIO(1L)